Milwaukee M12 HammerVac 2509-22 Handleiding

Milwaukee Niet gecategoriseerd M12 HammerVac 2509-22

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M12 HammerVac 2509-22 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/20

Cat. No. / No de cat.

2509-20

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

M12™ HAMMERVAC™ UNIVERSAL DUST EXTRACTOR

M12™ HAMMERVAC™ DÉPOUSSIÉREUR UNIVERSEL

EXTRACTOR UNIVERSAL DE POLVO M12™ HAMMERVAC™

IMPORTANT

SAFETY

INSTRUCTIONS

WARNING

WHEN USING AN

E L E C T R I C A L

D U S T E X T R A C T O R , B A S I C

PRECAUTIONS SHOULD ALWAYS

BE FOLLOWED, INCLUDING THE

FOLLOWING: READ ALL INSTRUC-

TIONS BEFORE USING DUST EX-

TRACTOR. BEFORE USING THE

DUST EXTRACTOR, READ THIS

OPERATOR’S MANUAL, YOUR TOOL,

BATTERY PACK AND CHARGER

OPERATOR’S MANUALS, AND ALL

LABELS ON THE DUST EXTRAC-

TOR, BATTERY PACK, CHARGER

AND TOOL. FAILURE TO FOLLOW

THE WARNINGS AND INSTRUC-

TIONS MAY RESULT IN ELECTRIC

SHOCK, FIRE AND/OR SERIOUS

INJURY.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Dust extractors have motors and other parts that

can produce sparks during normal use. Do not

use within 30 feet of areas where explosive materials

may be present (such as gasoline pumps and places

where liquids like paint thinners, cleaners, solvents,

etc. are stored).

• Do not use in the presence of explosive dust,

liquids or vapors.

• Do not use where oxygen or anesthetics are used.

• Do not allow to be used as a toy. Close attention is

necessary when used by or near children.

• Use extra care when using on stairs.

ELECTRICAL SAFETY

• Do not pick up wet material. Do not use water to

settle dust.

• Do not handle battery pack or dust extractor with

wet hands.

PERSONAL SAFETY

• STAY ALERT. Watch what you are doing and use

common sense. Do not use dust extractor when you

are tired, distracted or under the inuence of drugs,

alcohol or medication causing diminished control.

• The operation of a dust extractor can result in for-

eign objects being blown into eyes, which can result

in eye damage. Always wear safety goggles or glass-

es with side shields when operating dust extractor.

• Wear a dust mask or use an OSHA compliant dust

extraction solution when working in dusty situations.

Dust particles can harm your lungs.

• Avoid accidental starting. Ensure the switch is

in the o󰀨-position before inserting battery pack.

Inserting battery pack in dust extractor that has the

switch on invites accidents.

• Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

dust extractor in unexpected situations.

• Keep hair, loose clothing, ngers, and all parts of

body away from openings and moving parts.

• Use only as described in this manual. Use only

manufacturer’s recommended attachments.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energizing power tools that have the switch

on invites accidents.

USE AND CARE

• Do not use without dust box and/or lter in place.

• Do not use to pick up ammable or combustible

liquids such as gasoline or use in areas where they

may be present.

• Do not pick up anything that is burning or smoking

such as cigarettes, matches, or hot ashes.

• Do not pick up soot, cement, plaster or drywall

dust without lter in place. These are very ne

particles that may a󰀨ect the performance of the motor

or be exhausted back into the air.

•This product is suitable for collection of silica dust

when used in accordance with these instructions.

To reduce the risk of health hazards from other

vapors or dust, do not vacuum carcinogenic, toxic

or hazardous materials such as asbestos, arsenic,

barium, beryllium, lead, pesticides or other health

endangered materials.

• WARNING: Some dust created by power sanding,

sawing, grinding, drilling, and other construction activi-

ties contains chemicals known to cause cancer, birth

defects or other reproductive harm. Some examples

of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

• Use special care when emptying heavily loaded

tanks.

• To avoid spontaneous combustion, empty dust

box after each use.

• Do not leave dust extractor unattended when bat-

tery pack is installed. Remove battery pack when

not in use and before servicing.

•Disconnect the battery pack from the appliance

before making any adjustments, changing acces-

sories, or storing appliance. Such preventive safety

measures reduce the risk of starting the appliance

accidentally.

• Do not put any object into openings. Do not use

with any opening blocked; keep free of dust, lint, hair,

and anything else that may reduce air ow.

• Maintain dust extractor. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may a󰀨ect the dust

extractor's operation. If damaged, have the dust

extractor repaired before use. Many accidents are

caused by poorly maintained tools.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used

with another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, ush with water. If liquid contacts

eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or

modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or

risk of injury.

• Do not expose a battery pack or tool to re or exces-

sive temperature. Exposure to re or temperature

above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging im-

properly or at temperatures outside the specied range

may damage the battery and increase the risk of re.

SERVICE

• Have your power tool serviced by a qualied repair

person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

• Do not modify or attempt to repair the appliance or

the battery pack (as applicable) except as indicated

in the instructions for use and care.

• Never service damaged battery packs. Service

of battery packs should only be performed by the

manufacturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

DUST EXTRACTORS

•Before using the dust extractor, read this opera-

tor’s manual, your tool, battery pack and charger

operator’s manuals, and all labels on the dust

extractor, battery pack, charger and tool.

• Always use side handle assembly with the correct

neck diameter for the rotary hammer/hammer

drill. An ill-tting side handle will not tighten securely,

causing loss of control.

• Never use dust extractor without dust box and

HEPA lter in place. Never use water to clean dust

box or HEPA lter.

• Wear ear protectors. Exposure to noise can cause

hearing loss.

•

WARNING

To reduce the risk of

injury, when working

in dusty situations, wear appropriate respiratory

protection or use an OSHA compliant dust extrac-

tion solution.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Always use side handle provided with dust extrac-

tor when using with a rotary hammer/hammer

drill. When dust extractor is removed from the

tool, always use side handle(s) supplied with

the tool. Loss of control can cause personal injury.

• Hold power tool by insulated gripping surfaces,

when performing an operation where the fastener

may contact hidden wiring. Fasteners contacting a

“live” wire may make exposed metal parts of the power

tool “live” and could give the operator an electric shock.

READ AND

SAVE ALL

INSTRUCTIONS

FOR FUTURE USE

FOR HOUSEHOLD OR COMMERCIAL USE

SYMBOLOGY

Volts

Direct Current

C US

UL Listing for Canada and U.S.

SPECIFICATIONS

Cat. No. 2509-20 .....................................................

Volts.............................................................. 12 DC

Battery Type M12™ .................................................

Charger Type................................................M12™

Max Bit Diameter 1-1/4" ...........................................

Hammer Collar Sizes

Diameter

.............................

Ø 1.6"-2.4" (41-61 mm)

Circumference

....................

5.1"-7.5" (129-192 mm)

Dust Box Cat. No 42-16-0580 ................................

Crevis Tool Cat. No 49-90-2325 .............................

Recommended Ambient

Operating Temperature 0°F to 125°F ......................

Product specificaties

Merk:	Milwaukee
Categorie:	Niet gecategoriseerd
Model:	M12 HammerVac 2509-22

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee M12 HammerVac 2509-22 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Milwaukee

Milwaukee M12 FUEL 2559-21 Handleiding

2 December 2024

Milwaukee L4 RLEPB Handleiding

19 November 2024

Milwaukee M18 Fuel Angler 2873B-22 Handleiding

16 November 2024

Milwaukee M18 Radius ONE-KEY 2150-20 Handleiding

25 Juni 2024

Milwaukee MXF041 Handleiding

23 Juni 2024

Milwaukee ROLL-ON 3300R Handleiding

23 Juni 2024

Milwaukee MXF NRG Handleiding

10 Juni 2024

Milwaukee TRB 1 Handleiding

10 Juni 2024

Milwaukee M12 IR-201B Handleiding

10 Juni 2024

Milwaukee L4 PPS Handleiding

10 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024

Philips Senseo HD7002 Handleiding

24 December 2024

D-Link DUB-C2 Handleiding

24 December 2024

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024

Nec DS1-TM01 Handleiding

24 December 2024

Profoto RFi Softbox Octa Handleiding

24 December 2024

Koenic KAP 2523 Handleiding

24 December 2024

Philips HD9921 Handleiding

24 December 2024

Philips Senseo HD7008 Handleiding

24 December 2024

Onkyo IRK1804C Handleiding

24 December 2024