Milwaukee M12 2571-21 Handleiding

Milwaukee Niet gecategoriseerd M12 2571-21

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M12 2571-21 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Cat. No. / No de cat.

2571-20

M12™ DRAIN SNAKE

SONDE SPIRALE M12™

SONDA FLEXIBLE PARA DESAGÜES M12™

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING

Read all safety warnings, instruc-

tions, illustrations and specifica-

tions provided with this power tool. Failure to follow

all instructions listed below may result in electric shock,

re and/or serious injury. Save all warnings and in-

structions for future reference. The term "power tool"

in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

• Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while operat-

ing a power tool. Distractions can cause you to lose

control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools. Un-

modied plugs and matching outlets will reduce risk

of electric shock.

• Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

• Do not abuse the cord. Never use the cord for car-

rying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk

of electric shock.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

• If operating a power tool in a damp location is

unavoidable, use a ground fault circuit interrupter

(GFCI) protected supply. Use of an GFCI reduces

the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use com-

mon sense when operating a power tool. Do not

use a power tool while you are tired or under the

inuence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result

in serious personal injury.

• Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

• Prevent unintentional starting. Ensure the switch

is in the o󰀨-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your nger on the

switch or energizing power tools that have the switch

on invites accidents.

• Remove any adjusting key or wrench before turn-

ing the power tool on. A wrench or a key left attached

to a rotating part of the power tool may result in per-

sonal injury.

• Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewelry. Keep your hair and clothing away from

moving parts. Loose clothes, jewelry or long hair can

be caught in moving parts.

• If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used. Use of dust col-

lection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

• Do not use the power tool if the switch does not turn

it on and o󰀨. Any power tool that cannot be controlled

with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

• Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

• Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may a󰀨ect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to

be performed. Use of the power tool for operations

di󰀨erent from those intended could result in a hazard-

ous situation.

• Keep handles and grasping surfaces dry, clean

and free from oil and grease. Slippery handles

and grasping surfaces do not allow for safe handling

and control of the tool in unexpected situations.

BATTERY TOOL USE AND CARE

• Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

• Use power tools only with specically designated

battery packs. Use of any other battery packs may

create a risk of injury and re.

• When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connection from one terminal to another.

Shorting the battery terminals together may cause

burns or a re.

• Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact ac-

• If needed, place protective covers in the work area.

The drain cleaning process can be messy.

• Make sure cable is fully retracted inside of the drain

cleaner. This will prevent whipping at start up.

• Place the drain cleaner at a distance no greater

than six inches from drain opening. If the drain

cleaner cannot be placed within six inches from

the drain opening, the drain opening will need to

be extended using a similar size pipe and ttings.

Greater distances can cause control problems leading

to twisting, kinking, breaking or whipping of the cable.

• Do not operate the drain cleaner in reverse rotation

except as described in this manual. Running the tool

in reverse for extended periods can cause damage to

the cable and accessories.

• Always use common sense and be cautious when

using tools. It is not possible to anticipate every

situation that could result in a dangerous outcome.

Do not use this tool if you do not understand these

operating instructions or you feel the work is beyond

your capability; contact Milwaukee Tool or a trained

professional for additional information or training.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

•

WARNING

Some dust created by power sanding,

sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such

as those dust masks that are specially designed to

lter out microscopic particles.

FUNCTIONAL DESCRIPTION

4 3

1. Handle

2 Forward/reverse

switch

3. Fixed drum shield

4 Drum cover

5. Front handle/Slide

action cable lock

6. Cable

7. Inner drum (Internal)

8. LED

9. Flat tool base

10. Trigger switch

cidentally occurs, ush with water. If liquid con-

tacts eyes, additionally seek medical help. Liquid

ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or

modied. Damaged or modied batteries may exhibit

unpredictable behavior resulting in re, explosion or

risk of injury.

• Do not expose a battery pack or tool to re or ex-

cessive temperature. Exposure to re or temperature

above 265°F (130°C) may cause explosion.

• Follow all charging instructions and do not charge

the battery pack or tool outside the temperature

range specied in the instructions. Charging im-

properly or at temperatures outside the specied range

may damage the battery and increase the risk of re.

SERVICE

• Have your power tool serviced by a qualied repair

person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained.

• Never service damaged battery packs. Service of

battery packs should only be performed by the manu-

facturer or authorized service providers.

SPECIFIC SAFETY RULES FOR

DRAIN SNAKE

• Only grasp the rotating cable with gloves recom-

mended by the manufacturer. Latex or loose tting

gloves or rags can become wrapped around the cable

and may result in serious personal injury.

• Do not allow the cutter to stop turning while the

cable is turning. This can overstress the cable and

may cause twisting, kinking or breaking of the cable

and may result in serious personal injury.

•One person must control both the cable and the

switch. If the cutter stops rotating, the operator must

be able to turn the tool o󰀨 to prevent the cable from

twisting, kinking and breaking.

• Use latex or rubber gloves inside the gloves rec-

ommended by the manufacturer, goggles, face

shields, protective clothing, and respirator when

chemicals, bacteria or other toxic or infectious

substances are suspected to be in a drain line.

Drains may contain chemicals, bacteria and other

substances that may cause burns, be toxic or infec-

tious or may result in other serious personal injury.

• Practice good hygiene. Do not eat or smoke while

handling or operating the tool. After handling or

operating drain cleaning equipment, use hot, soapy

water to wash hands and other body parts exposed

to drain contents. This will help reduce the risk of health

hazards due to exposure to toxic or infectious material.

• Only use the drain cleaner for the recommended

drain sizes. Using the wrong size drain cleaner can

lead to twisting, kinking or breaking of the cable and

may result in personal injury.

• Inspect cable for wear and damage before use.

Replace a worn or damaged cable before using the

drain cleaner.

• Do not twist, kink or over bend cables. Breaking of

the cable may result in serious personal injury.

• Inspect the drain to be cleaned before use. If pos-

sible, determine the access point(s) to the drain, the

size(s) and length(s) of the drain, distance to mainlines,

the nature of the blockage, presence of drain clean-

ing chemicals or other chemicals, etc. If chemicals

are present in the drain, it is important to understand

the specic safety measures required to work around

those chemicals. Contact the chemical manufacturer

for required information.

Product specificaties

Merk:	Milwaukee
Categorie:	Niet gecategoriseerd
Model:	M12 2571-21

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee M12 2571-21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Milwaukee

Milwaukee M12 FPTR Handleiding

10 April 2024

Milwaukee M12 FHIR38 Handleiding

10 April 2024

Milwaukee M12 FIR12 Handleiding

10 April 2024

Milwaukee M18 BI Handleiding

10 April 2024

Milwaukee C18 PCG Handleiding

3 April 2024

Milwaukee WCE 30 Handleiding

19 Maart 2024

Milwaukee STC46-1 Handleiding

19 Maart 2024

Milwaukee STC30-1 Handleiding

19 Maart 2024

Milwaukee M12 C4 Handleiding

19 Maart 2024

Milwaukee M28 C Handleiding

19 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive IAN 327221 Handleiding

1 Mei 2024

Samsung UN32J4001AF Handleiding

1 Mei 2024

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024