Milwaukee M12 2420-21 Handleiding

Milwaukee Zaagmachine M12 2420-21

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee M12 2420-21 (11 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

M12™ CORDLESS HACKZALL® RECIPROCATING SAW

SCIE ALTERNATIVE HACKZALL® M12™

SIERRA ALTERNATIVA HACKZALL® DE M12™

Cat. No.

No de cat.

2420-20

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S

MANUAL.

AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN

COMPRENDRE LE MANUEL DE L'UTILISATEUR.

PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL

MANUAL DEL OPERADOR.

2 3

PERSONAL SAFETY

GENERAL POWER TOOL SAFETY WARNINGS

WORK AREA SAFETY

ELECTRICAL SAFETY

• Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

• Do not operate power tools in explosive atmos-

pheres, such as in the presence of ﬂ ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

• Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

• Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiﬁ ed plugs and matching outlets will

reduce risk of electric shock.

• Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase

the risk of electric shock.

• Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

• When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use

of a cord suitable for outdoor use reduces the risk

of electric shock.

• If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

result in personal injury.

• Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewel-

lery or long hair can be caught in moving parts.

• If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

• Do not force the power tool. Use the correct

WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.

Failure to follow the warnings and instructions may result in electric shock, ﬁ re and/or

serious injury. Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

POWER TOOL USE AND CARE

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

• Do not use the power tool if the switch does not

turn it on and o. Any power tool that cannot be

controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such pre-

ventive safety measures reduce the risk of starting

the power tool accidentally.

• Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

• Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits

etc., in accordance with these instructions,

taking into account the working conditions and

the work to be performed. Use of the power tool

for operations dierent from those intended could

result in a hazardous situation.

• Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the inﬂ

uence of drugs, alcohol or medication.

moment of inattention while operating power tools

may result in serious personal injury.

• Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

• Prevent unintentional starting. Ensure the

switch is in the o-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your ﬁ nger on the switch or energising power tools

that have the switch on invites accidents.

• Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

• Recharge only with the charger speciﬁ ed by

the manufacturer. A charger that is suitable for

one type of battery pack may create a risk of ﬁ re

when used with another battery pack.

• Use power tools only with speciﬁ cally desig-

nated battery packs. Use of any other battery

packs may create a risk of injury and ﬁ re.

• When battery pack is not in use, keep it away

from other metal objects like paper clips,

BATTERY TOOL USE AND CARE

4 5

FUNCTIONAL DESCRIPTION

ASSEMBLY

WARNING Recharge only with the

charger speciﬁ ed for the battery. For speciﬁ c

charging instructions, read the operator’s

manual supplied with your charger and bat-

tery.

Inserting/Removing the Battery

To remove the battery, push in the release buttons

and pull the battery pack away from the tool.

To insert the battery, slide the pack into the body of

the tool. Make sure it latches securely into place.

SYMBOLOGY

• Hold power tool by insulated gripping sur-

faces, when performing an operation where the

cutting accessory may contact hidden wiring.

Cutting accessory contacting a “live” wire may

make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

• Use clamps or another practical way to secure

and support the workpiece to a stable platform.

Holding the work by hand or against your body

leaves it unstable and may lead to loss of control.

• Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

• WARNING Some dust created by power sanding,

sawing, grinding, drilling, and other construction

activities contains chemicals known to cause

cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

• lead from lead-based paint

• crystalline silica from bricks and cement and other

masonry products, and

• arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are spe-

cially designed to ﬁ lter out microscopic particles.

SPECIFICATIONS

Cat. No. Volts

No Load Strokes

Per Minute

Length of

Stroke

2420-20 12 0 - 3000 1/2"

1. Shoe

2. Quik-Lok™ blade clamp

3. Fuel Gauge

4. Handle

5. Trigger

6. Trigger lock

7. LED

Selecting a Blade

The Quik-Lok® Blade Clamp can be used with

all 1/2" shank universal Hackzall® and Sawzall®

blades. Use MILWAUKEE blades for best perfor-

mance. When selecting a blade, choose the right

type and length. Many types of blades are available

for a variety of applications: cutting metal, wood,

nail-embedded wood, scroll cutting, roughing-in,

and contours.

Many lengths are also available. Choose a length

long enough to extend beyond the shoe and your

work throughout the stroke. Do not use blades

less than 3-1/2" long since they won’t extend

beyond the shoe throughout the stroke.

For best performance and longest life, see your

MILWAUKEE Electric Tool catalog or go online to

www.milwaukeetool.com to select the best blade

for the job.

Installing and Removing Blades from the Quik-

Lok® Blade Clamp

Remove battery pack before changing blades.

Make sure the spindle and blade clamp areas are

clean. Metal chips and sawdust may prevent the

Quik-Lok® Blade Clamp from clamping securely.

WARNING Always remove battery

pack before changing or removing acces-

sories. Only use accessories specifically

recommended for this tool. Others may be

hazardous.

Trigger Lock

To lock the trigger,

push the trigger lock as

shown.The trigger will

not work while the switch

is in the locked position.

Always lock the trigger

and remove the battery

pack before performing

maintenance and chang-

ing accessories. Lock the

trigger when storing the

tool and when the tool is

not in use.

To unlock the trigger,

push the trigger lock as

shown.

Fuel Gauge

To determine the amount of charge left in the bat-

tery, pull the trigger. The Fuel Gauge will light up

for 2-3 seconds.

To signal the end of charge, 1 light on the fuel gauge

will ﬂ ash for 2-3 seconds.

WARNING To reduce the risk of injury,

be sure the blade always extends beyond

the shoe and workpiece throughout the

stroke. Blades may shatter if they impact the

workpiece or shoe (Fig. 2).

Push for

Unlock

Fig. 3

Push for

Lock

OPERATION

WARNING Always remove battery

pack before changing or removing acces-

sories. Only use accessories specifically

recommended for this tool. Others may be

hazardous.

WARNING To reduce the risk of injury,

wear safety goggles or glasses with side shields.

Fig. 1

HACKZALL

Blade clamp

Blade

1. Depending on the job, the blade may be inserted

with the teeth facing up or down. To install a

blade, twist collar in the direction of the arrow

while inserting the blade into the clamp until the

tang butts against the collar.

2. Release collar and the spring loaded mechanism

will clamp the blade ﬁ rmly in place.

3. Twist collar in the opposite direction of the ar-

row to ensure that the blade is locked into the

clamp.

4. Tug on blade to make sure it is securely locked

in place.

5. To remove a blade, twist collar in the direction of

the arrow while pulling on the blade. Be careful

when handling hot blades.

Quik-Lok® Blade Clamp Maintenance

• Periodically clean dust and debris from the Quik-

Lok® Blade Clamp with dry compressed air.

• If the collar resists twisting, twist the collar back

and forth to shake debris loose.

• Periodically lubricate Quik-Lok

Blade Clamp with

a dry lubricant such as graphite.

Removing broken blades from the Quik-Lok

Blade Clamp

Broken blades can be removed by the following:

• Remove battery pack before removing blades.

• Point the tool downward, twist the collar, and

shake the tool up and down ( turn the tool DO NOT

on while your ﬁ ngers are holding the blade clamp

open). The shank of the broken blade should drop

out of the clamp.

• If shaking the tool doesn't work - In most cases, a

corner of the broken blade will extend beyond the

blade clamp. Twist the collar and pull the broken

blade out of the clamp by this corner.

• If the broken stub doesn't extend far enough to be

grabbed by its corner, use a thin blade with small

teeth (such as a metal cutting blade) to hook the

blade that is jammed in the clamp while twisting

the collar and pull it out.

Stroke

Fig. 2

SPECIFIC SAFETY RULES

SERVICE

Volts

Direct Current

No Load Strokes per Minute

(SPM)

Underwriters Laboratories, Inc.

United States and Canada

• Have your power tool serviced by a qualiﬁ ed

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

coins, keys, nails, screws, or other small metal

objects that can make a connection from one

terminal to another. Shorting the battery terminals

together may cause burns or a ﬁ re.

• Under abusive conditions, liquid may be eject-

ed from the battery; avoid contact. If contact

accidentally occurs, ﬂ ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation

or burns.

WARNING Do not touch blade imme-

diately after use. Blade will be hot.

Starting, Stopping and Controlling Speed

To start the tool, grasp the handle ﬁ rmly and pull

the trigger. An LED is turned on when the trigger

is pulled.

To vary the speed, increase or decrease the pres-

sure on the trigger. The further the trigger is pulled,

the greater the speed.

To stop the tool, release the trigger. Make sure the

blade comes to a complete stop before removing

the blade from a partial cut or laying the tool down.

General Cutting

For straight or contour cutting from an edge, line

the blade up with your cutting line. Before the blade

contacts the workpiece, grasp the handle ﬁ rmly

and pull the trigger. Then guide the tool along your

cutting line. Always hold the shoe ﬂ at against the

workpiece to avoid excessive vibration.

Cutting Metals

Begin cutting at a slow speed, gradually increas-

ing speed as you cut. When cutting into metals or

hard materials that can not be cut from an edge,

drill a starting hole larger than the widest part of

the blade.

Product specificaties

Merk:	Milwaukee
Categorie:	Zaagmachine
Model:	M12 2420-21

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee M12 2420-21 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Zaagmachine Milwaukee

Milwaukee M18 FTCHS14 Handleiding

11 September 2024

Milwaukee MXF COSCG2 Handleiding

5 September 2024

Milwaukee MSUV280 Handleiding

10 Juni 2024

Milwaukee M18 BJS Handleiding

10 April 2024

Milwaukee SCS 65 Q Handleiding

10 April 2024

Milwaukee M12 BS Handleiding

10 April 2024

Milwaukee M18 FMCS66 Handleiding

10 April 2024

Milwaukee M18 BSX Handleiding

10 April 2024

Milwaukee SSPE 1500 X Handleiding

19 Maart 2024

Milwaukee SSPE 1300 RX Handleiding

19 Maart 2024

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Einhell BT-CS 700 E Handleiding

4 December 2024

Einhell BT-CS 500 Handleiding

4 December 2024

Einhell TKS 1500 ECO Plus Handleiding

4 December 2024

Einhell TKS 1500 ECO Handleiding

4 December 2024

Einhell MKS 1940 Handleiding

4 December 2024

Einhell WIS 400/230 Handleiding

4 December 2024

Einhell WIS 700/400 Handleiding

4 December 2024

Einhell WIS 600/400 Handleiding

4 December 2024

Einhell TE-TC 18/115 Li Handleiding

4 December 2024

Makita DJR187ZK Handleiding

2 December 2024