Milwaukee 48-22-8556 Handleiding

Milwaukee Niet gecategoriseerd 48-22-8556

Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 48-22-8556 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 202 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/11

Cat. No. / No de cat.

48-22-8556, 48-22-8557, 48-22-8558

OPERATOR'S MANUAL

MANUEL de L'UTILISATEUR

MANUAL del OPERADOR

WARNING To reduce the risk of injury, user must read and understand operator's manual.

AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien

comprendre le manuel.

ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.

Este manual se aplica a los modelos anteriores (puede venderse por separado)

56" HIGH CAPACITY STEEL STORAGE CHEST &

56" HIGH CAPACITY STEEL STORAGE CABINET

COFFRE DE RANGEMENT EN ACIER GRANDE CAPACITÉ DE

1,42 M (56") ET CABINET DE RANGEMENT EN ACIER GRANDE

CAPACITÉ DE 1,42 M (56")

CAJA DE ALMACENAMIENTO DE ACERO DE GRAN CAPACIDAD

DE 1,42 M (56") Y GABINETE DE ALMACENAMIENTO DE ACERO

DE GRAN CAPACIDAD DE 1,42 M (56")

IMPORTANT SAFETY INSRUCTIONS

WARNING

READ ALL SAFETY WARNINGS

AND ALL INSTRUCTIONS. Failure

to follow the warnings and instructions may re-

sult in serious injury. Save all warnings and in-

structions for future reference.

WORK AREA SAFETY

• -Use the chest/cabinet and accessories in ac

cordance with these instructions and in the

manner intended, taking into account the working

conditions. Use of the chest/cabinet for operations

different from those intended could result in a haz-

ardous situation.

•Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

•Fully assemble the chest/cabinet according to the

assembly instructions. Do not leave off any pieces.

• Chest must be fastened by screws through

connectors after it has been placed on top of

cabinet.

•Do not modify the chest/cabinet in any way. Use

only specically recommended accessories. Drilling

holes or modifying the chest/cabinet will lower the

load capacity, which can cause the chest/cabinet to

collapse, resulting in injury.

•Lock wheels when chest/cabinet is not being

moved. Unlocked wheels can allow the chest/

cabinet to move unexpectedly.

•Keep the chest/cabinet on a level surface. Do not

load, unload, or park chest/cabinet on an incline.

The chest/cabinet may become unbalanced and tip,

resulting in injury.

•Always balance the chest/cabinet load to avoid

tipping. Unbalanced chests/cabinets are more likely

to tip when being moved or when using the chest/

cabinet work surfaces. Evenly distribute the weight

front to back and side to side. Place more than half

the total load weight on the bottom cabinet when pos-

sible. To help prevent the chest/cabinet from tipping,

load the product starting with the bottom drawers.

• Do not exceed the maximum product weight,

including contents. Do not exceed the maximum

weight for each drawer. Overloaded chests/

cabinets can tip, collapse, or damage drawer slides.

• Do not open more than one drawer at a time.

Chest/cabinet may tip, causing injury.

•Keep children and bystanders away while

loading, unloading, and moving chest/cabinet.

Distractions can cause you to lose control.

• -Only lift the chest/cabinet according to the in

structions in this manual. Other methods may be

dangerous, resulting in injury.

• Only transport the chest/cabinet when empty.

Properly secure when transporting.

• Do not mount the chest/cabinet on a truck bed

or any other moving object.

• Lock both the lid and all drawers before rolling

the chest/cabinet. The drawers could come open

and make the chest/cabinet unstable and tip.

• Only roll the chest/cabinet short distances by

using the handle provided.

• Secure all items before rolling the chest/cabinet.

Loose items could shift, causing the chest/cabinet

to become unstable.

• Do not use drawers as steps. Do not stand on the

chest/cabinet. Chest/cabinet will tip, causing injury.

• Be careful when closing the chest top cover.

Remove hands before closing the top cover.

• -Do not use chest/cabinet in explosive atmo

spheres, such as in the presence of ammable

liquids, gases or dust. This equipment has internal

arcing or sparking parts. Chest/cabinet should not

be located in a recessed area or below oor level.

•Chest/cabinet plugs must match the outlet.

Never modify the plug in any way. Do not use

any adapter plugs with earth (grounded) chest/

cabinet power strips. Unmodied plugs and match-

ing outlets will reduce risk of electric shock.

•Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

•Maintain chest/cabinet. Check for misalignment

or binding wheels, breakage or bending of drawer

slides or other parts and any other condition that

may affect the chest/cabinet's operation. Do not use

damaged chest/cabinet.

•Maintain labels and nameplates. These carry

important information. If unreadable or missing,

contact a MILWAUKEE service facility for a free

replacement.

•Have your chest/cabinet serviced by a qualied

repair person using only identical replacement

parts. Visit a local authorized service center for

repairs. Components, such as the power strip, are

not user replaceable. This will ensure that the safety

of the chest/cabinet is maintained.

•

WARNING

Chemical Burn Hazard.

This device contains a

lithium button/coin cell battery. A new

or used battery can cause severe

internal burns and lead to death in as

little as 2 hours if swallowed or enters the body.

Always secure the battery cover. If it does not

close securely, stop using the device, remove

the batteries, and keep it away from children. If

you think batteries may have been swallowed

or entered the body, seek immediate medical

attention.

SYMBOLOGY

Hardware Included

NOTE: Items not shown in actual size. Hardware

lengths are approximate.

Hardware Item Description Quantity

AA Bolt M6 x 16L 10

BB Steel washer

19 x 8.5 x 2 16

CC Bolt M8 x 12L 16

DD Screw M4 x 12L 20

EE Screw M6 x 12L 8

FF Screw M4 x 16L 20

GG Nut M6 2

HH Shoulder bolt

M6 x 8L 2

II Nylon washer

19 x 8.5 x 1.5 2

JJ Screw M6 x 16L 2

Item Description Quantity

Side handle 1

Tool hanger 1

6" Swivel caster

with brake 2

6" Rigid caster 2

Bracket 2

Shelf hinge bracket 2

Front bumper 8

Rear bumper 2

Chest corner extrusion 2

Cabinet corner extrusion 2

GROUNDING

WARNING

Improperly connecting the ground-

ing wire can result in the risk of

electric shock. Check with a qualied electrician

if you are in doubt as to whether the outlet is

properly grounded. Do not modify the plug pro-

vided with the chest/cabinet. Never remove the

grounding prong from the plug. Do not use the

chest/cabinet if the cord or plug is damaged. If

damaged, have it repaired before use. If the plug

will not t the outlet, have a proper outlet installed

by a qualied electrician.

Chests/Cabinets with Three Prong Plugs

Chests/cabinets marked “Grounding Required”

have a power strip with a three wire cord and three

prong grounding plug. The plug must be connected

to a properly grounded outlet (See Figure A). If the

power strip should electrically malfunction or break

down, grounding provides a low resistance path to

carry electricity away from the user, reducing the risk

of electric shock.

The grounding prong in the plug is connected through

the green wire inside the cord to the grounding sys-

tem in the power strip. The green wire in the cord

must be the only wire connected to the power strip's

grounding system and must never be attached to an

electrically “live” terminal.

Your power strip must be plugged into

Fig. A

an appropriate outlet, properly in-

stalled and grounded in accordance

with all codes and ordinances. The

plug and outlet should look like those

in Figure A.

ASSEMBLY

CAUTION

Be sure to follow the assembly in-

structions for the appropriate

chest/cabinet. Do not use power tools to as-

semble chest/cabinet. Tighten bolts with hand

wrenches.

Tools Required (Not Included)

Phillips

screwdriver

Safety

goggles

10 mm

Wrench

13 mm

Wrench

Product specificaties

Merk:	Milwaukee
Categorie:	Niet gecategoriseerd
Model:	48-22-8556

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 48-22-8556 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Milwaukee

Milwaukee L4 RLEPB Handleiding

19 November 2024

Milwaukee M18 Fuel Angler 2873B-22 Handleiding

16 November 2024

Milwaukee M18 Radius ONE-KEY 2150-20 Handleiding

25 Juni 2024

Milwaukee MXF041 Handleiding

23 Juni 2024

Milwaukee ROLL-ON 3300R Handleiding

23 Juni 2024

Milwaukee MXF NRG Handleiding

10 Juni 2024

Milwaukee TRB 1 Handleiding

10 Juni 2024

Milwaukee M12 IR-201B Handleiding

10 Juni 2024

Milwaukee L4 PPS Handleiding

10 Juni 2024

Milwaukee M12 FPTR Handleiding

10 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux STA9 Handleiding

23 November 2024

Electrolux UMP3 Handleiding

23 November 2024

Electrolux ZS70GL Handleiding

23 November 2024

Bosch HEZ8TK36UC Handleiding

23 November 2024

Bosch HEZ8ZZ36UC Handleiding

23 November 2024

Bosch HDZIT301 Handleiding

23 November 2024

Bosch HEZBS301 Handleiding

23 November 2024

LG LX-330 Handleiding

23 November 2024

Stamos S-PLASMA 60U Handleiding

23 November 2024

Bosch KSZ2AVU00 Handleiding

22 November 2024