Milwaukee 4005 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Milwaukee 4005 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
WIRING INSTRUCTION
REVISED BULLETIN DATE
SERVICE PARTS LIST
MILWAUKEE ELECTRIC TOOL CORPORATION
13135 W. LISBON RD., BROOKFIELD, WI 53005
Drwg. 4
BULLETIN NO.
54-16-5180
CATALOG NO.
Mar. 2008
DYMODRILL with INTERNAL CLUTCH
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
865A or 865B 58-01-0930
4005 STARTING
SERIAL NO.
EXAMPLE:
Component Parts (Small #)
Are Included When Ordering
The Assembly (Large #).
00 0
1 42-04-0600 Water Hose Adapter (1)
2 45-80-0060 Shut Off Valve (1)
3 06-57-1050 Retaining Nut (1)
4 45-88-1140 Thrust Washer (2)
5 43-06-0160 Clutch Disc-Outer (3)
6 43-06-0150 Clutch Disc-Inner (5)
7 43-76-0051 Water Swivel Hsg Incl 06-83-2430 Scr (1)
8 40-50-2150 Disc Spring (4)
9 45-06-0635 Seal (2)
10 45-88-8565 Washer (1)
13 38-50-6020 Spindle (1)
16 34-80-3800 Retaining Ring (1)
17 02-20-2515 Ball Bearing (1)
18 06-82-9202 1/4-20 x 4-1/4" Taptite T-30 (4)
19 28-14-1870 Gear Case Assy., Incl 06-65-1535 Pin (1)
20 45-36-1520 Spindle Spacer (1)
21 32-75-3440 Spindle Gear (1)
22 02-50-4830 Needle Bearing (1)
23 02-04-1205 Ball Bearing (4)
24 36-66-3751 Pinion Shaft Assy. (1)
25 06-42-1600 Woodruff Key (1)
26 32-40-1581 Intermediate Gear (1)
27 40-50-6300 Shifting Spring (2)
28 44-70-0100 Shifting Plunger (2)
29 32-60-2011 Pinion Gear (1)
30 45-88-0520 Thrust Bearing Washer (1)
31 02-80-1800 Thrust Bearing (1)
32 32-10-0060 Clutch Gear Assembly (1)
33 06-42-2000 Woodruff Key (1)
34 36-14-0061 Clutch Shaft (1)
35 45-88-0530 Thrust Bearing Washer (1)
36 02-80-5000 Thrust Bearing (1)
37 32-10-0051 Clutch Gear Assembly (1)
38 45-88-0510 Thrust Bearing Washer (2)
39 02-80-1200 Thrust Bearing (1)
40 45-98-0090 Shifting Yoke (1)
41 14-13-0210 Diaphragm Assy., Incl 06-65-1155 Pin (1)
42 30-15-0272 Shift Cam (1)
43 43-44-0580 Foam Gasket (2)
44 06-65-0840 1/8 x 3/4" Groove Pin (1)
45 25-60-0056 Shifting Knob (1)
46 02-04-1229 Ball Bearing (1)
47 16-70-0320 120 V Armature (1)
48 22-84-0790 Fan (1)
49 42-14-0291 Baf e (1)
50 02-04-1041 Ball Bearing (1)
51 06-82-9152 10-24 x 2-3/4" Pan Hd. Sem. T-25 (2)
52 18-70-0290 120 V. Field (1)
53 23-16-1410 Motor Insulator (1)
54 22-20-0680 Brush Tube (2)
55 22-18-0702 Carbon Brush Assembly (2)
56 06-82-8835 8-32 x 5/16" Pan Hd. Sem.T-20 (2)
57 22-56-0470 Terminal Block (1)
58 22-38-0140 Wire Trap (1)
59 31-17-0200 Cord Clamp (1)
60 06-82-7326 8-16 x 1" Pan Hd. Plastite T-20 (2)
61 22-64-0300 Cord Set (1)
62 06-72-1720 Service Rivet (2)
63 12-99-1875 Service Nameplate (1)
64 22-32-0350 Brush Cover (2)
65 06-82-5316 8-32 x 1/2" Pan Hd. Slt. Taptite T-20 (2)
66 28-50-6363 Motor Housing (1)
67 06-82-5266 4-40 x 1/4" Pan Hd. TaptiteT-10 (2)
68 12-98-2100 Instruction Plate (1)
69 06-95-5200 8-32 x 5/16" Slotted Hex Hd. Screw (1)
70 45-36-0225 Gear Spacer (1)
49-96-4700 1-3/8" Open End Wrench (1)
45-88-0800 Water Hose Washer (For Fig. No. 1) (1)
61-10-0660 Retaining Nut Spanner Tool (1)
61-30-0061 Water Seal Jig (1)
FOR MOUNTING DRILL MOTOR USE:
06-75-3090 1/4-20 x 7/8" Socket Hd. Screw (4)
06-97-4050 1/4" Split Ring Lock Washer (4)
FIG. LUBRICATION
19 18 Oz. Type "J" Grease, No. 49-08-4220
FIG. PART NO. DESCRIPTION OF PART NO. REQ.FIG. PART NO. DESCRIPTION OF PART NO. REQ.
SEE THE REVERSE SIDE
FOR THE SERVICING
OF THE INTERNAL
CLUTCH MECHANISM
Servicing the Clutch Mechanism-
Torque Value for the Clutch Mechanism Retaining Nut ( g. no. 3).
Grease / Lubrication when assembling the internal clutch component parts:
the Clutch Discs ( g. nos. 5 and 6), Thrust Washers ( g. no. 4) and
Disc Springs ( g. no. 8) are to be lightly coated with grease
(Cat. No. 49-08-4220 type ‘J’) during their assembly
into the spindle gear.
Grease / Lubrication speci cation includes
coating internal bore of the spindle gear.
4 45-88-1140 Thrust Washers (2)
5 43-06-0160 Clutch Discs-Outer (3)
6 43-06-0150 Clutch Discs-Inner (5)
8 40-50-2150 Spring Discs (4)
32-75-3430 Spindle Gear (1)
Service note: the assembly torque for the Clutch Mechanism Retaining Nut,
No. 06-57-1050 ( g. no. 3), which insures the static torque required to slip
the clutch mechanism, as lubricated, should be 25-30 ft-lbs.
With the gear case separated from the diaphragm & motor housing of the
Clutch Dymo-Drill motor
insert & engage a retaining nut spanner with the notches 61-10-0660
in the 06-57-1050 clutch adjustment retaining nut.
with a attached to a torque wrench, 1/2" hex socket bit driver
interlock the male hex with the female hex found in the threaded end
of the dymo-drill spindle.
turn the torque wrench clockwise , observing the torque reading 3
and tighten the clutch adjustment retaining nut on the rear of the
spindle shaft until a value of is obtained.25-30 ft-lbs
Retaining Nut Spanner
Service Tool
No. 61-10-0660
1/2" Hex Bit Socket Driver,
Snap-On #psa16,
Pronto #544
or equivalent


Product specificaties

Merk: Milwaukee
Categorie: Niet gecategoriseerd
Model: 4005

Heb je hulp nodig?

Als je hulp nodig hebt met Milwaukee 4005 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Milwaukee

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd