Miller Lite ML90 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Miller Lite ML90 (5 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
H1S220
OFFICIAL LICENSED PRODUCT
This item is intended for people of legal drinking age
©2022 Miller Brewing Company. All rights reserved.
Produced under license by Koolatron. Made in China.
User Manual
Warranty
This product is warranted to the retail customer for 90 days from date of retail purchase,
against defects in material and workmanship.
WHAT IS COVERED
• Replacement parts and labour.
• Transportation charges to customer for the repaired product.
WHAT IS NOT COVERED
• Damage caused by abuse, accident, misuse, or neglect.
• Transportation of the unit or component from the customer to Koolatron.
IMPLIED WARRANTIES
Any implied warranties, including the implied warranty of merchantability are also limited
to the duration of 90 days from the date of retail purchase.
WARRANTY AND SERVICE PROCEDURE
Keep the original, dated, sales receipt with this manual. If you have a problem with your unit,
or require replacement parts, call 1-800-265-8456 or email service@koolatron.com
A Koolatron Master Service Centre must perform all warranty work. Service after warranty
may be obtained at a Master Service Centre or at an authorized service dealer.
Purchase Receipt is required to establish warranty eligibility.
Master Service Centres locations:
U.S.A. - 4330 Commerce Dr., Batavia, NY 14020-4102
Canada - 139 Copernicus Blvd., Brantford, ON N3P1N4
A Koolatron Master Service Centre must perform all warranty work.
www.koolatron.com
©2022 Koolatron, Inc. All rights reserved.
All specification are subject to change without notice. 01/2022 - v3
Bar Fridge - 90L / 3.2 cu.ft.
ML90
2
SPECIFICATIONS IMPORTANT SAFETY INSTRUCTIONS (cont.)
3
Power Requirements: AC 115V 60Hz 60W
Capacity: 91L / 3.2 cu.ft.
Setting (7): -2°C (28°F) at 25°C (77°F) ambient air temp.
Setting (1): 10°C (50°F) at 25°C (77°F) ambient air temp.
Weight: 22 kg (48.5 lbs)
IMPORTANT SAFETY INSTRUCTIONS
WARNING
When using electrical appliances, basic safety precautions should always be followed to reduce the
risk of fire, electric shock and personal injury: READ ALL INSTRUCTIONS BEFORE USING THE
PRODUCT.
NOTE - If the refrigerator/freezer has been placed in a horizontal or tilted position for any period of
time, wait 24 hours before plugging the unit in.
1. Use this appliance only for its intended purpose as described in this use and care guide.
2. This refrigerator must be properly installed in accordance with the installation instructions before
it is used. See grounding instructions in the INSTALLATION section.
3. Never unplug your refrigerator by pulling on the power cord. Always grasp the plug firmly and
pull straight out from the outlet.
4. Do not operate any appliance with a damaged cord or plug. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.
5. Unplug your refrigerator before cleaning or before making any repairs. NOTE - If for any reason
this product requires service, we strongly recommend that a certified technician performs the
service. Component parts shall be replaced with like components and servicing shall be done by
factory authorized service personell, so as to minimize the risk of possible ignition due to incorrect
parts or improper service.
6. Do not use any electrical device or any sharp instrument in defrosting your refrigerator.
7. Before you throw away your old refrigerator or freezer, take DANGER – Risk of child entrapment.
off the doors and leave the shelves in place to that children may not easily climb inside.
8. After your refrigerator is in operation, do not touch the cold surfaces in the freezer compartment,
particularly when hands are damp or wet. Skin may adhere to these extremely cold surfaces.
9. Do not refreeze foods that have been thawed completely. The United States Department of
Agriculture in Home and Garden Bulletin No. 69 reads: “…You may safely refreeze frozen foods that
have thawed if they still contain ice crystals or if they are still cold-below 40°F.
“…Thawed ground meats, poultry, or fish that have any off-odor or off-color should not be refrozen
and should not be eaten. Thawed ice cream should be discarded. If the odor or color of any food is
poor or questionable, discard it. The food may be dangerous to eat … Even partial thawing and
re-freezing reduce the eating quality of foods, particularly fruits, vegetables, and prepared foods. The
eating quality of red meats is affected less than that of many other foods. Use refrozen foods as
soon as possible, to save as much of its eating quality as you can.”
10. This refrigerator should not be recessed or built-in in an enclosed cabinet. It is designed for
freestanding installation only.
11. Do not operate your refrigerator in the presence of explosive fumes.
REFRIGERANT GAS WARNINGS
DANGER - RISK OF FIRE OR EXPLOSION. FLAMMABLE REFRIGERANT USED.
- DO NOT use mechanical devices to defrost refrigerator.
- DO NOT puncture refrigerant tubing.
- Consult repair manual/owner’s guide before attempting to service this product. All safety precautions
must be followed.
- Dispose of property in accordance with federal or local regulations.
GROUNDING INSTRUCTIONS
ELECTRICAL REQUIREMENTS
The electrical requirements are a 115V 60 Hz, AC only, 15A. It is recommended that a separate circuit
serving only the product be provided. The product is equipped with a 3-wire cord having a 3-prong
grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded.
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces risk of
electric shock by providing an escape wire for the electric current. The cord provided with this
appliance is equipped with a grounding wire and a grounding plug. The plug must be plugged into an
outlet that is properly installed and grounded.
Avoid the use of three prong adapters or cutting off the third grounding prong in order to accommo-
date a two prong outlet. This is a dangerous practice since it provides no effective grounding for the
refrigerator and may result in shock hazard.
WARNING - Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or serviceman if:
1) The grounding instructions are not completely understood.
2) You are unsure that the appliance is properly grounded.
3) You have any questions about the grounding or electrical instructions.
POWER SUPPLY CORD
1. Avoid the use of an extension cord because of potential safety hazards under certain conditions.
Have a qualified electrician or serviceman to install an outlet near the appliance.
2. If it is absolutely necessary to use longer cord sets or an extension cord, extreme care must be
exercised.
a) Use only a grounding type 3-wire extension cord that has a 3-blade grounding plug and a 3-slot
receptacle that will accept the plug on the appliance.
b) The marked electrical rating of the cord set or extension cord must equal to or greater than the
electrical rating of the appliance. The longer cord should be arranged so that it will not drape over the
counter top or table top where it can be pulled on by children or tripped over unintentionally.
NOTE - Neither Koolatron nor the dealer can accept any liability for damage to the product or personal
injury resulting from failure to observe the electrical connection procedures.
4 5
INSTALLATION INSTALLATION (cont.)
1. Unpack your refrigerator by removing all packaging materials like carton, base, foams, adhesive
tape, etc.
2. Remove all accessories, internal packaging material used to hold shelves, ice tray, etc. in place.
3. Clean the remains of all adhesive tap used and remove all printed material supplied.
4. Install the refrigerator in a convenient location away from extreme heat and cold. Allow sufficient
clearance between the refrigerator and side wall so the door(s) will open without obstruction.
Refrigerator is not designed for recessed installation.
5. The floor on which the refrigerator should be placed must be flat, hard, solid, and even. The
refrigerator should not be placed on any soft material such as foam, plastic, etc.
6. To level your refrigerator, use the two leveling legs located on the bottom front of your refrigerator.
Adjust by turning the legs counter clockwise to raise or clockwise to lower your refrigerator. The
door will close easier if the leveling legs are extended.
7. The following are recommended minimum clearances around the refrigerator for proper air
circulation:
- Sides: 3/4” (19mm)
- Top: 2” (50mm)
- Back: 2” (50mm)
Proper air circulation will help your refrigerator work at maximum efficiency.
NOTE - The appliance must be correctly connected to the power supply.
CAUTION - Care should be taken during the handling moving and use of the freezer to avoid damaging
the refrigerant tubing or increasing the risk of a leak
WARNING - It is important to keep the power cord away from the compressor at the back of the refriger-
ator
as during operation, the compressor can reach a high temperature and could cause serious
damage to the power cord.
PROTECTION FROM HEAT AND MOISTURE
• Do not install your refrigerator in any location where heavy moisture is present or if the location is
not properly insulated. This refrigerator is not designed to operate in temperature setting below 55°F.
• Location for the refrigerator should be on a hard surface and away from direct sunlight and heat
source, e.g., radiators, baseboard heaters, cooking appliances, etc.
DOOR ALIGNMENT
1. Remove the top hinge cover.
2. Loosen the top hinge screws using a Phillips head screwdriver.
3. Adjust the door or put a spacer in between and then tighten the screws.
STARTING YOUR NEW REFRIGERATOR
After cleaning your refrigerator thoroughly. Wipe the outside with a soft
dry cloth, the interior with aclean moist cloth.
1. Insert the power supply cord into the socket.
2. Turn the thermostat dial to an initial setting of “7” for 15-20 minutes.
NOTE - As the door gets pressed in during shipping, the gasket may have to be reset. This is done to
prevent the cool refrigerated air from escaping. If there is a gap between the door gasket and the
cabinet, set the gasket by gently pulling it out of the seal gap.
REVERSING THE DOOR HINGE
1. Remove the top hinge cover.
2. Using Phillips Head Screwdriver, loosen and remove the screws holding the top hinge in place.
3. Remove top hinge and carefully lift off the door.
4. Remove the screw hole plugs from the opposite side and insert the plugs in the screw hole
openings of the just removed screws.
5. Remove any loose items in the refrigerator and carefully turn refrigerator on its back and place in a
secure area.
6. Loosen the screws holding the lower hinge bracket to the refrigerator and remove screws and
bracket.
7. Remove the screws from the other side and insert in the previously removed screw holes.
8. Remove door pin by turning counter clockwise and reinsert to the underside of the bracket and
tighten.
9. Align bracket and insert (2) remaining screws into the holes provided .
10. Align hole in the door with the door pin and washer and gently push down until firm.
11. Align upper hinge bracket with screw holes insert screws and partially secure, check that door and
cabinet are properly aligned and then secure tightly.
12. Replace hinge cap.


Product specificaties

Merk: Miller Lite
Categorie: Koelkast
Model: ML90

Heb je hulp nodig?

Als je hulp nodig hebt met Miller Lite ML90 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast Miller Lite

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast