Mikrotik CRS125-24G-1S-2HnD-IN Handleiding

Mikrotik Niet gecategoriseerd CRS125-24G-1S-2HnD-IN

Lees hieronder de 📖 handleiding in het Nederlandse voor Mikrotik CRS125-24G-1S-2HnD-IN (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

CRS125-24G-1S-series

CRS125-24G-1S-seriesCRS125-24G-1S-series

CRS125-24G-1S-IN

CRS125-24G-1S-2HnD-IN

First use

The device can be accessed through the IP 192.168.88.1, the username is admin and there is no password (or, for some models, check user and wireless

. Please connect with your web browser to this IP address to configure it. See this page for connection and configuration guides: passwords on the sticker) h

ttps://wiki.mikrotik.com/wiki/Category:Manual

The device comes preinstalled with RouterOS and is ready to use. The device is compatible with RouterOS v6 and newer.

For the wireless model CRS125-24G-1S-2HnD-IN, ports are switched, wireless interface and switch are bridged, and the bridge contains a DHCP server.

Eth1 and SFP1 have DHCP client configured. After connected choose your country, to apply country regulation settings.

Update the device by clicking the "Check for updates" button to v6.46 or the latest RouterOS software to ensure the best performance and

stability. The device needs to have an active internet connection.

To manually update the device, go to our download pagehttps://mikrotik.com/download

Choose your architecture (ARM) and download the latest packages from any channel to your PC.

Open Winbox and upload packages in the Files menu.

Reboot the device.

Updating software will ensure the latest security fixes and regulations set by local law.

Set up your password to secure the device.

Powering

The device accepts direct-input power jack: 10-28 V (24 V0.8 A PSU included in the package).

The power consumption under maximum load can reach 20 W.

Configuration

Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version

ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to

conform with local regulations.

RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to

the possibilities: . In case IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address https://mt.lv/help https://mt.lv/winbox

of the device from the LAN side (all access is blocked from the Internet port by default).

For recovery purposes, it is possible to boot the device from the network, see a section .Reset button

Expansion slots and ports

Twenty four (24) 10/100/1000 (Gigabit) Ethernet ports (Auto MDI/X)

CRS125 has one SFP cage, compatible with 1.25G SFP modules.

CRS125-24G-1S-2HnD-IN has built-in 802.11b/g/n 2GHz wireless access point.

Reset button

The routerBOOT reset button has the following functions. Press the button and apply the power, then:

Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.

Release the button when the LED turns solid green to clear all configuration and defaults.

Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers (required for reinstalling RouterOS over

the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.

Useful for RouterBOOT debugging and recovery.

Operating system support

The device supports RouterOS software with the version number at or above what is indicated in the RouterOS menu /system resource. Other operating

systems have not been tested.

Safety Notice

Electric shock hazard. This equipment is to be serviced by trained personnel only. This is a class A device, operating it near residential radio equipment

could cause radio interference.

CRS125-24G-1S-IN:

Federal Communication Commission Interference Statement

FCC ID:TV7CRS109-8G2HND

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its

antenna must not be co-located or operation in conjunction with any other antenna or transmitter.

IMPORTANT: Exposure to Radio Frequency Radiation.

This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and

operated with a minimum distance of 20 cm between the radiator and any part of your body.

CE Declaration of Conformity

Manufacturer: Mikrotikls SIA, Brivibas gatve 214i Riga, Latvia, LV1039.

С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС. Цялостният

текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес:

https://mikrotik.com/products

CS Tímto Mikrotīkls SIA prohlašuje, že typ rádiového zařízení RouterBOARD je v souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o shodě

je k dispozici na této internetové adrese:

https://mikrotik.com/products

DA Hermed erklærer Mikrotīkls SIA , at radioudstyrstypen RouterBOARD er i overensstemmelse med direktiv 2014/53/EU. EU-

overensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse:

https://mikrotik.com/products

DE Hiermit erklärt Mikrotīkls SIA , dass der Funkanlagentyp RouterBOARD der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-

Konformitätserklärung ist unter der folgenden Internetadresse verfügbar:

https://mikrotik.com/products

EL Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός RouterBOARD πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης

συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο:

https://mikrotik.com/products

EN Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following internet address:

https://mikrotik.com/products

ES Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RouterBOARD es conforme con la Directiva 2014/53/UE. El texto

completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente:

https://mikrotik.com/products

Product specificaties

Merk:	Mikrotik
Categorie:	Niet gecategoriseerd
Model:	CRS125-24G-1S-2HnD-IN
Gewicht:	- g
Breedte:	285 mm
Diepte:	145 mm
Hoogte:	45 mm
LED-indicatoren:	Ja
Stroom:	1.2 A
Frequentie van processor:	600 MHz
Processormodel:	Qualcomm Atheros AR9344
Aantal processorkernen:	1
Wi-Fi-standaarden:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
USB-poort:	Ja
Ethernet LAN:	Ja
Inclusief AC-adapter:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	24
Aantal USB-aansluitingen:	1
Aansluiting voor netstroomadapter:	Ja
Intern geheugen:	128 MB
Type processor:	Ja
Modulatie:	16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, QPSK
Wifi-band:	Dual-band (2.4 GHz / 5 GHz)
Wifi-standaard:	Wi-Fi 4 (802.11n)
Interfacetype Ethernet LAN:	Gigabit Ethernet
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Bekabelingstechnologie:	10/100/1000Base-T(X)
Rack-montage:	Nee
xDSL-verbinding:	Nee
Ethernet WAN:	Ja
Spanning:	24 V
Power over Ethernet (PoE):	Ja
Bedrijfstemperatuur (T-T):	-35 - 65 °C
Code geharmoniseerd systeem (HS):	85176990