Midland LXT535VP3 Handleiding

Midland Radio LXT535VP3

Lees hieronder de 📖 handleiding in het Nederlandse voor Midland LXT535VP3 (4 pagina's) in de categorie Radio. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Welcome to the world of Midland electronics

Congratulations on your purchase of a high quality MIDLAND

product. Your 2-way radio represents state-of-the-art high-tech

engineering. Designed for FRS (Family Radio Service) operation, this

compact package is big on performance. It is a quality piece of

electronic equipment, skillfully constructed with the finest

components. The circuitry is all solid-state and mounted on a rugged

printed circuit board. Your two-way radio is designed for reliable and

trouble-free performance for years to come.

Features

- 22 FRS Channel

- Call Alert

- Scan Function

- Roger Beep Tone

- Silent Operation

- Keypad Lock

- Power HI/LO Settings

- Auto Squelch

- Speaker / Microphone Jacks

- Battery Life Extender

- Battery Low Indicator

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device does not

cause harmful interference, and (2) this radio must accept any

interference that may cause undesired operation.

To maintain compliance with FCC’s RF exposure guidelines, for

body-worn operation, this radio has been tested and meets the

FCC RF exposure guidelines when used with Midland Radio

Corp. accessories supplied or designated for this product. Use of

other accessories may not ensure compliance with FCC RF

exposure guidelines.

LCD DISPLAY

1. LOW BATTERY ICON – Indicates the

battery level is low.

2. TRANSMIT (TX) ICON – Indicates

radio is transmitting a signal.

3. CHANNEL NUMBER – Changes from

1~22 on FRS band.

4. KEY LOCK ICON – Indicates KEY

LOCK mode is on.

5. RECEIVE (RX) ICON – Indicates

radio is receiving a transmission.

6. TRANSMIT POWER LEVEL ICON –

Indicates TX Power setting (H/L)

CONTROLS

7. PTT Button – Press and hold to

transmit voice communication.

8. CALL/LOCK Button – Press to send

a CALL Alert signal. Press and hold to

turn KEY LOCK on/off.

9. MIC – Built-in microphone.

10. SPEAKER – Built-in speaker.

11. ANTENNA

12. EXTERNAL SPEAKER/MIC/CHG.

JACK

13. POWER / MENU Button – Press and

hold for at least 3 seconds to turn the

radio on/off. Press momentarily to

access Menu mode.

14. SCAN Button – Press to enter SCAN

mode.

15. UP s

ss and DOWN t

tt Buttons –

Make adjustments in MENU mode.

BATTERY INSTALLATION

Your radio operates with either a NiMH battery pack or optional 4 AAA

alkaline batteries. The belt clip should be removed to ease installation or

removal of the batteries.

To install the batteries:

1. With the back of the radio facing you, remove the belt clip (see

diagram on the next page) for easy access, then remove the Battery

Cover by pressing down on the top center and sliding it down from the

radio.

2. Insert 4 AAA batteries observing the polarity as shown. Installing

the batteries incorrectly will prevent the unit from operating or may

damage the unit.

3. Return the Battery Cover by sliding it up on the radio. Replace the

belt clip, making sure it locks into place.

MIDLAND RADIO CORPORATION

MIDLAND RADIO CORPORATIONMIDLAND RADIO CORPORATION

5900 Parretta Drive

Kansas City, MO 64120

Call 816.241.8500

We’d love to hear from you! Let us know what you

think of your new Midland product on

or by visiting us at

midlandusa.com

Note: Features & Specifications are subject to change without

notice. MIDLAND is not responsible for unintentional errors or

omissions on its packaging.

BATTERY

COMPARTMENT

BATTERY

COMPARTMENT

COVER

Press here and

push down to open

BELT CLIP

LOCK TAB

BELT CLIP

LATCH

INSTALLING THE BELT CLIP

To install the BELT CLIP, slide the clip up into the slot on the back of

the radio until the BELT CLIP LATCH clicks. To remove the BELT

CLIP LOCK TAB, press the up, then gently pull the belt clip down

toward the bottom of the radio.

CHARGING THE BATTERY PACK

Your radio is equipped to use a rechargeable NiMH battery pack

which can be recharged with the optional desktop charger (as

described below). The radio can also be charged by inserting the AC

adapter into the radio charge jack. Initial charge time is 24 hours.

Charge time is about 12 hours thereafter. For maximum battery life,

we recommend charging the battery pack when the low battery icon

comes on. Remove the radios from the charger when the charge time

expires.

To charge using a Desktop Charger:

1. Place the rechargeable battery packs in the radios.

2. Connect the AC adapter into an AC wall outlet.

3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if

charging in vehicle) into the desktop charger jack.

4. Place the units into the desktop charger slot and note that the LED

indicator with color will light up, indicating charging function. RED

In order to ensure that the battery pack is fully charged, it is

recommended that the battery pack be charged for at least 12

hours with the radio turned OFF.

1. Only use our NiMH battery pack and AC adapter.

2. Do not attempt to charge alkaline batteries or any batteries

or battery packs other than the one indicated in the manual.

This may cause leakage and damage to the radio.

3. For long term storage of the radio, turn the radio OFF and

remove the batteries from the radio.

LOW BATTERY LEVEL INDICATOR

When the battery voltage gets low, the LOW BATTERY ICON

will blink along with the message “ ” on the display. When usingbt Lo

the rechargeable battery pack, the low battery icon will indicate that

you are very close to the batteries being exhausted. When using AAA

Alakaline batteries, the low battery icon means you have about 50%

of battery life remaining.

POWER ON/OFF AND VOLUME

Press the button for at least 3 seconds to turn thePOWER/MENU

radio on/off. During Power On, the radio will beep 3 times with

different tones, the LCD will display all icons for 1 second and the

LCD display will indicate the last channel selected.

To increase/decrease the volume level, press the s

ss t

tt\buttons

during or RX STANDBY mode.

TRANSMITTING AND RECEIVING A CALL

To communicate, all radios in your group must be set to the same

channel.

1. For maximum clarity, hold the radio at least 1 inch (2.5 cm) from

your mouth.

2. Press and hold the button and speak in a normal voice PTT

into the icon will appear continuously on microphone. The TX

the LCD display while transmitting.

3. To receive a call, release the icon will appearPTT button. The RX

on the display when your radio is receiving a transmission.

OPERATING YOUR RADIO

ABOUT RANGE

Your LXT Series radios are designed to give you maximum range

under optimum conditions.

Optimum Conditions are:

lOver water

lOpen rural areas without obstructions

lFlat areas where you can see the other person

To ensure you get maximum range:

lBe sure to use fresh or fully charged batteries - low batteries will

cause low power conditions.

lBe sure to set your radio to use Hi power.

LXT Series QUICK REFERENCE CHART

SCAN

Your radios can scan all 22 channels for activity. To enter, quickly

press the button. Repeat the same procedure to exit. YourSCAN

radio will rapidly scan each of the 22 channels and stop on any active

channel for 4 seconds before resuming scan.

When you press the button to transmit on an active channel, thePTT

scanning function will stop and remain on the active channel. To

resume scanning, quickly press the SCAN button.

MENU Channel

1~22

Roger Beep

On/Off

Power

H/L

Silent Operation

On/Off

Rev J

IMPORTANT NOTICE

Exposure To Radio Frequency Energy

Your Midland radio is designed to comply with the following national and

international standards and guidelines regarding exposure of human

beings to radio frequency electromagnetic energy:

- United States Federal Communications Commission, Code of Federal

Regulations: 47 CFR part 2 sub-part J

- American National Standards Institute (ANSI)/Institute of Electrical &

Electronic Engineers (IEEE) C95. 1-1992

- Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999

Edition

- National Council on Radiation Protection and Measurements (NCRP) of

the United States, Report 86, 1986

- International Commission on Non-lonizing Radiation Protection

(ICNIRP) 1998

To control your exposure and ensure compliance with the general

population or uncontrolled environment exposure limits, transmit no more

than 50% of the time. The radio generates measurable RF energy

exposure only when transmitting.

Body-Worn Operation

If you wear the radio on your body when transmitting always use Midland-

supplied or approved belt clip, holster, case, or body harness for this

product. Use of any accessories not supplied or approved by Midland may

exceed FCC/Health Canada RF exposure guidelines. If you do not use

any accessories supplied or approved by Midland, ensure the radio and

its antenna are at least 1 inch (2.5cm) from your body when

transmitting.

CALL ALERT

Your radios can transmit a call alert for a fixed length of time. To send

a call alert, press the icon will appear whileCALL button. The TX

transmitting a call alert and a tone can be heard on the speaker for

confirmation.

KEYPAD LOCK

To avoid accidentally changing the radio setting, press the LOCK

button for 4 seconds. The KEY LOCK icon will appear on the display.

PTT CALLand will still be active. Repeat the same procedure to

unlock the keypad.

CHANNEL SELECTION (FRS BAND)

Press the button once, and then the MENU s

ss t

tt\buttons to select

one of the 22 FRS channels. To confirm the selection, press the PTT

button or press the button again to move to the next featureMENU

setting.

Note : To communicate between two radios, all radios in your

group must be set to the same channel.

TRANSMIT (TX) POWER LEVEL SELECTION

Your radio has 2 power level settings. To select the power level on

channels 1~7 and 15~22, press the button until a “ ” iconMENU Pr

appears blinking on the display. Then press the s

ss t

tt\buttons to

select icon Hi LoTRANSMIT POWER LEVEL (H: /L: ). To confirm,

press the button or press the button again to move to thePTT MENU

next feature setting.

Note : You cannot adjust the power setting on channels

8~14. They are set to Lo power per FCC regulations.

ROGER BEEP (end of transmission) TONE

When the button is released, the radio will beep to confirm toPTT

other users that your transmission has finished.

To turn the tone on, press the button until theROGER BEEP MENU

display shows a “ ” icon while on the right of the “ ” display, an “rb rb oF”

icon appears. Select “ ” by pressing the on s

ss t

tt\buttons and push the

PTT key, or press the button to move to the next featureMENU

setting.

To turn the tone off, press the button until theROGER BEEP MENU

display shows a “ ” icon while on the right of the “ ” display, an “rb rb on”

icon appears. Select “ ” by pressing the oF s

ss t

tt\buttons and push the

PTT key, or press the button to move to the next featureMENU

setting.

SILENT OPERATION

Your radio has a SILENT OPERATION mode. In this mode, all

“beeps” and “tones” are disabled.

To turn the SILENT OPERATION mode on, press the MENU button

until the display shows a “ ” icon while on the right of the “bP bP”

display, an “ ” icon appears. Select “ ” by pressing the on oF s

ss t

tt\

buttons and push the key or the PTT MENU button.

To turn the SILENT OPERATION mode off, press the MENU button

until the display shows a “ ” icon while on the right of the “bP bP”

display, an “ ” icon appears. Select “ ” by pressing the oF on s

ss t

tt\

buttons and push the key or the PTT MENU button.

EXTERNAL SPEAKER/MICROPHONE JACK

Your radio can be used with an optional external

speaker/microphone or headset, freeing your hands

for other tasks. To use an optional speaker/

microphone or headset:

l Insert the plug(s) into the SPK/MIC jacks.

lPlace the earbud into your ear, and adjust the

mic into your desired position.

Note : You can charge a rechargeable NiMH

battery pack thru the CHG Jack

PROBLEM SOLUTION

No Power - Check battery installation and/or replace batteries

Cannot Receive

Messages

- Confirm the radios have the same channel

settings.

- Make sure that you are within range of the other

transceivers.

- Buildings and other structures may interfere with

your communication.

Radio is not responding

to button presses

- Make sure key lock is not on (See Keypad Lock).

- Radio might need to be reset. Turn radio off then

on.

Display is dim - Recharge or replace batteries.

Charger not functioning - Contacts on the bottom of the radio may require

cleaning.

- Ensure the outlet where the charger is plugged

in is functioning properly.

- Check that the battery pack is installed in the radio

properly.

USE AND CARE

1. Use a soft damp cloth to clean the radio

2. Do not use alcohol or cleaning solutions to clean the radio.

3. Do not immerse the radio in water.

4. Dry the radio with a dry lint-free cloth should it get wet.

5. Turn off the radio and remove the batteries during long-term

storage.

If you have a problem which you believe requires

service, please call first and speak with a service

technician at 816-241-8500. Many problems can be

remedied over the phone without returning the unit for

service.

TROUBLESHOOTING GUIDE SPECIFICATIONS

Channels 22 FRS Channels

Operating Frequency UHF 462.5500 ~ 467.7125 MHz

Power Source 4 AAA Alkaline or 4.8V Rechargeable NiMH

battery pack

FRS FREQUENCY CHART (MHz)

CH. No CH. Freq. CH. No CH. Freq. CH. No CH. Freq.

1 462.5625 9 467.5875 17 462.6000

2 462.5875 10 467.6125 18 462.6250

3 462.6125 11 467.6375 19 462.6500

4 462.6375 12 467.6625 20 462.6750

5 462.6625 13 467.6875 21 462.7000

6 462.6875 14 467.7125 22 462.7250

7 462.7125 15 462.5500

8 467.5625 16 462.5750

* Channels 8~14 are low-power FRS channels

IMPORTANT: This device complies with Industry Canada licence-exempt

RSS standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept

any interference, including interference that may cause undesired

operation of the device.

IMPORTANT: Le présent appareil est conforme aux CNR d'Industrie

Canada applicables aux appareils radio exempts de licence. L'exploitation

est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout

brouillage radioélectrique subi même si le brouillage est susceptible d'en

compromettre le fonctionnement.

IMPORTANT: Changes or modifications to this unit not expressly

approved by MIDLAND RADIO CORP. could void your right to operate

this unit. Your radio is set up to transmit a regulated signal on an assigned

frequency. It is against the law to alter or adjust the settings inside the

COMMUNICATOR to exceed those limitations. Any adjustment to your

radio must be made by qualified technicians.

LIMITED WARRANTY (United States and Canada)

Subject to the exclusions set forth below, Midland Radio Corporation will repair or

replace, at its option without charge, any Midland FRS transceiver which fails due to

a defect in material or workmanship within Three Years following the initial consumer

purchase.

This warranty does not apply to water damage, battery leak, abuse or misuse of

unauthorized accessories, unauthorized service or modification or altered products.

Accessories have a 90 day warranty from date of purchase, including any chargers,

microphones, and cables.

This warranty does not include the cost of labor for removal or re-installation of the

product in a vehicle or other mounting.

ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, SHALL BE LIMITED AS SET FORTH HEREIN AND TO THE DURATION

OF THE LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT AS

PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE

REMEDY OF THE CONSUMER AND IS PROVIDED IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MIDLAND BE

LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING BUT NOT LIMITED TO

NEGLIGENCE, GROSS NEGLIGENCE, BODILY INJURY, PROPERTY DAMAGE

AND DEATH) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE

PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR

CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR

PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA OR OTHER

FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR

INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT

THESE DAMAGES MAY BE DISCLAIMED BY LAW.

For Product Purchased in the USA:

Performance of any obligation under this warranty may be obtained by returning the

warranted product, prepaid freight, along with proof of purchase to:

Midland Radio Corporation

Warranty Service Department

5900 Parretta Drive

Kansas City, MO 64120

This warranty gives you specific legal rights, and you may also have other rights,

which vary from state to state.

Note: The above warranty applies only to merchandise purchased in the United

States of America or any of the territories or possessions thereof, or from a U.S.

Military exchange.

For Product Purchased in Canada:

Performance of any obligation under this warranty may be obtained by returning the

warranted product, along with proof of purchase, to your place of purchase in

Canada.

This warranty gives you specified legal rights. Additional warranty rights may be

provided by law in some areas within Canada.

AVPH2

AVPH2AVPH2

- Closed Face

Helmet

Headset Kit

AVP1

AVP1AVP1

- Over the Ear

Headsets

ACCESSORIES

Accessories can be purchased at midlandusa.com.

AVPH3

AVPH3AVPH3

- Surveillance

Headsets

AVPH5

AVPH5AVPH5

- Behind the

Head Headsets

AVPH4

AVPH4 AVPH4

- Wrap Around

the Ear

Headsets

AVPH7

AVPH7AVPH7

- Camo

Headsets with

Boom Mic

AVP-H8

AVP-H8AVP-H8

- Acoustic Throat

Mic

AVP6

AVP6AVP6

- Chargers and

Batteries

Product specificaties

Merk:	Midland
Categorie:	Radio
Model:	LXT535VP3
Gewicht:	90.7 g
Ondersteund aantal accu's/batterijen:	4
Batterij bijna leeg-indicatie:	Ja
Maximumbereik:	38624 m
Frequentie:	462.550 - 467.7125 MHz
Oplaadbaar:	Ja
Afmetingen (B x D x H):	57.15 x 44.45 x 152.4 mm
Riemclip:	Ja
Batterijen inbegrepen:	Ja
Type batterij:	AAA
Aantal kanalen (totaal):	22 kanalen