Middle Atlantic Products SSL Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Middle Atlantic Products SSL (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
I-2000 Rev K
THANK YOU
Thank you for purchasing the SS/SSL Sliding Shelf. Please read these instructions
thoroughly before installing this product.
PRODUCT FEATURES
- Shelf slides out for easy access to the rear of equipment or to create a writing surface
- Telescopic rear support allows both shelves to be mounted to any rack
- Large shelf area can accommodate a wide variety of equipment
Page 2
7/8” HOOK AND LOOP FASTENERS
- To extend the shelf, grab the front edge of the shelf and
gently pull forward until the rollers seat in locking
dimples.
- To extend the shelf, pull forward by grasping the flange
on the front of the shelf. The shelf will lock when
fully extended.
SLIDING SHELF (SS SHOWN)
8-32 x 1/2 PANHEAD SCREW
7/8"
SSL
SS
#10X5/8
WOOD SCREW
8-32
STAR NUT
QTY PART
QTY PART
SSL
SS
CAUTION: DO NOT PULL OUT THE SHELF TO FAR,
IT MAY BECOME DETACHED.
QTY
PSSRB1
PART
1 A
QTY PART
2 B
QTY PART
2 C
QTY PART
2 D
2 E
2 F
PARTS LIST
OPERATION
Page 3
- Place soft material dot on the component’s foot. If there is no feet on the component, place as close to
the corner as possible to ensure stability. (FIGURE D)
- Extend the rear hanging brackets until they meet
the sides of the rack. (FIGURE A)
- Attach PSSRB1s to the shelf’s preinstalled
rear support bracket with provided hardware.
(FIGURE B)
- Ensure all brackets are aligned, tighten screws,
nuts and preinstalled wing-nuts. (FIGURE B)
NOTE: Leave no gap during installation of
part B. (FIGURE C)
- Level the shelf from front to back Secure the
brackets to the sides with supplied wood screws.
Tighten the wing-nuts on the bracket. (FIGURE A)
- Mate coarse material dot on the soft material dot. (FIGURE E)
FIGURE A (Rear of Shelf)
FIGURE B (Rear of Shelf)
INCORRECT
(Weaker) CORRECT
(Stronger)
WOOD RACK INSTALLATION (Without Rear Rail)
INSTALLATION WITH REAR RAIL
FIGURE E
FIGURE D
HOOK AND LOOP FASTENER INSTALLATION
INSTALLATION
Rear
Support
Bracket
Rear
Support
Bracket
E
F
C
B
DD
FIGURE C
Note
Gap


Product specificaties

Merk: Middle Atlantic Products
Categorie: Niet gecategoriseerd
Model: SSL
Kleur van het product: Zwart
Breedte: 482.6 mm
Diepte: 383.5 mm
Hoogte: 44.45 mm
Gewicht verpakking: 4810 g
Breedte verpakking: 533.4 mm
Diepte verpakking: 508 mm
Hoogte verpakking: 127 mm
Soort: Rekschap
Materiaal behuizing: Staal
Maximale gewichtscapaciteit: 16 kg
Certificering: Greenguard
Duurzaamheidscertificaten: RoHS
Aantal per verpakking: 1 stuk(s)
Rackcapaciteit: 1U
Code geharmoniseerd systeem (HS): 85389099
Nuttige breedte: 406.4 mm
Inbouwdiepte (max): 607 mm
Inbouwdiepte (min): 383.5 mm

Heb je hulp nodig?

Als je hulp nodig hebt met Middle Atlantic Products SSL stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Middle Atlantic Products

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024