Middle Atlantic Products SS Handleiding

Middle Atlantic Products Niet gecategoriseerd SS

Lees hieronder de 📖 handleiding in het Nederlandse voor Middle Atlantic Products SS (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

I-2000 Rev K

THANK YOU

Thank you for purchasing the SS/SSL Sliding Shelf. Please read these instructions

thoroughly before installing this product.

PRODUCT FEATURES

- Shelf slides out for easy access to the rear of equipment or to create a writing surface

- Telescopic rear support allows both shelves to be mounted to any rack

- Large shelf area can accommodate a wide variety of equipment

Page 2

7/8” HOOK AND LOOP FASTENERS

- To extend the shelf, grab the front edge of the shelf and

gently pull forward until the rollers seat in locking

dimples.

- To extend the shelf, pull forward by grasping the flange

on the front of the shelf. The shelf will lock when

fully extended.

SLIDING SHELF (SS SHOWN)

8-32 x 1/2 PANHEAD SCREW

7/8"

SSL

#10X5/8

WOOD SCREW

8-32

STAR NUT

QTY PART

SSL

CAUTION: DO NOT PULL OUT THE SHELF TO FAR,

IT MAY BECOME DETACHED.

QTY

PSSRB1

PART

1 A

QTY PART

2 B

QTY PART

2 C

QTY PART

2 D

2 E

2 F

PARTS LIST

OPERATION

Page 3

- Place soft material dot on the component’s foot. If there is no feet on the component, place as close to

the corner as possible to ensure stability. (FIGURE D)

- Extend the rear hanging brackets until they meet

the sides of the rack. (FIGURE A)

- Attach PSSRB1s to the shelf’s preinstalled

rear support bracket with provided hardware.

(FIGURE B)

- Ensure all brackets are aligned, tighten screws,

nuts and preinstalled wing-nuts. (FIGURE B)

NOTE: Leave no gap during installation of

part B. (FIGURE C)

- Level the shelf from front to back Secure the

brackets to the sides with supplied wood screws.

Tighten the wing-nuts on the bracket. (FIGURE A)

- Mate coarse material dot on the soft material dot. (FIGURE E)

FIGURE A (Rear of Shelf)

FIGURE B (Rear of Shelf)

INCORRECT

(Weaker) CORRECT

(Stronger)

WOOD RACK INSTALLATION (Without Rear Rail)

INSTALLATION WITH REAR RAIL

FIGURE E

FIGURE D

HOOK AND LOOP FASTENER INSTALLATION

INSTALLATION

Rear

Support

Bracket

Rear

Support

Bracket

FIGURE C

Note

Gap

Product specificaties

Merk:	Middle Atlantic Products
Categorie:	Niet gecategoriseerd
Model:	SS
Kleur van het product:	Zwart
Breedte:	511 mm
Diepte:	398 mm
Hoogte:	62 mm
Gewicht verpakking:	66.2 g
Breedte verpakking:	533.4 mm
Diepte verpakking:	508 mm
Hoogte verpakking:	127 mm
Soort:	Rekschap
Materiaal behuizing:	Staal
Maximale gewichtscapaciteit:	23 kg
Code geharmoniseerd systeem (HS):	85389099
Inbouwdiepte (max):	607 mm
Inbouwdiepte (min):	383.5 mm