Microlab MD312 Handleiding

Microlab Cradle/docking station MD312

Lees hieronder de 📖 handleiding in het Nederlandse voor Microlab MD312 (4 pagina's) in de categorie Cradle/docking station. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

Prior to initial use, please read the manual carefully

Multimedia Speaker System

All other brand and product names are trademarks of their respective holders. Actual contents may differ slightly from those shown in print. All

specifications and designs are subjected to changes without any prior notice.

MD312

User Manual

www.microlab.cn

Microlab Electronics Co.,Ltd

Made in China

Th e ® work mark a nd l o gos ar e re g istered t ra demarks own ed by B luet oo t h SIG, Inc. and a ny u se of such ma rks byBl u et oo th

Mi c rolab El ect ro ni cs Co., L td is und er lic e nse. Other tradem a rks and tr ade n ames a r e those of t h eir re sp ect ive own er s.

80-MD312-97-0001-01 2012-04-09 (changed to power adapter)

English 2

FrequentlyAskedQuestions (FAQ)

FrequentlyAskedQuestions Answers

Check if the system is powered on or battery is

replaced with fresh BL-5C type

Please perform an initial charge of 4 hours prior

to initial use.

Check if the audio source is properly paired and

connected. Secondly check if the 3.5mm stereo plug

is correctly inserted for AUX mode.

Ensure volume is correctly set

What are the products

supported?

Where to place this speaker

If the problem still exists, please contact the distributor or ask for professional service

Check if the volume is at lower level and the Mp3

format is recorded at above 196 bitrate

Please check the audio source distance, try to place

it nearer to the speaker system.

Intermittent sound

LED do not light up

No Sound

Sound is distorted

It is magnetically shielded so can be placed

near LCD TV Monitor without any distortion

Any Bluetooth enabled music devices and playback

devices such as PC, Media players with 3.5mm

stereo plug.

How to charge the system? Simply connect the system to the supplied Charging

adapter. After charged the LED will turned off.

TechnicalInformation

- The end -

AMPLIFIER

Total Power: 4 Watt RMS

Power distribution: 1.25 Watt x 2 + 1.5 Watt

Harmonic distortion: < 5% 1 W 1 kHz

Frequency response: 40 Hz - 18 kHz

Signal/Noise ratio: > 65 dB

Separation: > 45 dB

Speakers

Tweeter type: 2” x 2

Tweeter rated power: 2 Watt 4 Ohm

Woofer type: 3”

Woofer rated power: 5 Watt 2 Ohm

Interfaces

Output: NIL

Input: 3.5mm stereo jack, mini- USB charging port

Wireless: Bluetooth 2.1 + EDR, and A2DP

80-MD312-97-0001-01 2012-04-09 (changed to power adapter)

2. BT Pairing ON (manually)

Depress for 3 secs, pairing mode

sequence will commence. If

prompted for security code,

please key in “0000”.

Once turned on, after 3 seconds the system will search for previous paired devices for 20

seconds with its LED blinking slowly. After 20 seconds if no paired devices are found, it will

commence new pairing sequence automatically. It will start the pairing sequence for 3

minutes before returning to the initial sequence of locating previously paired device.

Blue LED blink rapidly

Pairing with Bluetooth music devices. Once paired, Bluetooth LED will blink for 2

seconds once about every 5 to 6 seconds interval. (skip this step if both MD312

and music device had saved this profile before)

iPhone, iPad or iPod

go to SETTINGS > GENERAL > enable BLUETOOTH > select MD312

Android Phone

go to SETTINGS > WIRELESS & NETWORKS > enable BLUETOOTH > select

MD312

Others

read the instruction manual included with your BT music device > enable

BLUETOOTH > select MD312.

Pai red successfull y

wi ll blin k twi ce

in 5 t o 6 seconds in terval s

MD312 MD312

Pa ir ed

an d

Caution:

To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No

user-serviceable parts inside. Refer servicing to qualified personnel only.

Explanationof Graphical Symbols:

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage

within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the product.

Important Safety Instructions

WARNINGS:

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.

2. Retain Instructions - The safety and operating instructions should be kept with the product for future

reference.

3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.

4. Follow instructions - All operating and users instructions should be followed.

5. Installation - Install in accordance with the manufacturer's instructions.

6. Power sources - This product should be operated only from the type of power source indicated by the

marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home,

consult your product dealer or local power company.

7. Grounding or polarization - the product is not required to be grounded. Ensure the plug is fully

inserted into the wall outlet or extension cord receptacle to prevent blade or pin exposure. Some

versions of the product are equipped with a power cord fitted with a polarized alternating line plug (a

plug having one blade wide than the other). This plug will fit onto the power outlet only one way. This

is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord

other than that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry

safety approval appropriate to the country of use.

8. Power cord protection - Power-supply cords should be routed so that they are not likely to be walked on,

kinked or pinched by items placed on or against them, paying particular attention to cords from plugs,

receptacles and the point where they exit from the appliance.

9. Overloading - Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk of

fire or electric shock.

10. Ventilation - The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar

surface. Do not cover the product with any items such as tablecloths, newspapers, etc.

11. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or

other products including amplifiers that produce heat. No naked flame sources, such as lighted candles,

should be placed on the apparatus.

12. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping,

splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for

example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool,

or etc.

13. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may

touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product. Do not place any object containing liquid on top of the product.

14. Cleaning - Unplug the product from the wall outlet before cleaning. The cabinet of the subwoofer may be

cleaned by dusting with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the

cabinet; spray onto the cloth. Be careful not to damage the drive units.

15. Attachments - Do not use attachments not recommended by the product manufacturers, as they may cause

hazards.

Operation

1. Power on

3. BT Pairing with BT audio device

4. BT playback

Once connected, you can commence the music playback either on the mobile phone, tablet or notebook, etc.

The sound will be transferred wirelessly to the MD312 system directly. During streaming,the LED will blink

once for 2 seconds duration in 5 seconds intervals.

Depress the + or - buttons for volume adjustments. The LED will illuminate in green steadily once depress.

To mute the playback,depress the Mute button and the LED will illuminate in green constantly till it isdepress

again to deactivate.

5. AUX IN mode

Connect the 3.5 mm stereo source to the AUX IN jack.

This will immediately disconnect the Bluetooth mode if it is on.

Commence your media player via the 3.5 mm stereo connection.

6. Battery charging (Lithium battery type: BL-5C)

Connect the charging adapter to mini-USB port of the speaker . Ensure the speaker system is turned off for

charge. The system will commence its auto charging mode. The LED will illuminate in bright red colour. Once

fully-charged,it will be turn dim red. Please initial charge the system for 4 hours prior to first.

80-MD312-97-0001-01 2012-04-09 (changed to power adapter)

Product specificaties

Merk:	Microlab
Categorie:	Cradle/docking station
Model:	MD312
Kleur van het product:	Wit
Ingebouwd display:	Nee
Gewicht:	1000 g
Breedte:	175 mm
Diepte:	109 mm
Hoogte:	178 mm
Gewicht verpakking:	1400 g
Breedte verpakking:	250 mm
Diepte verpakking:	442 mm
Hoogte verpakking:	488 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Kunststof
LED-indicatoren:	Ja
Bluetooth:	Ja
Aan/uitschakelaar:	Ja
Bluetooth-versie:	2.1+EDR
Bluetooth-profielen:	A2DP
Connectiviteitstechnologie:	Bedraad en draadloos
Type stroombron:	Battery, USB
Meegeleverde kabels:	Audio (3,5 mm)
Inclusief AC-adapter:	Ja
Gemiddeld vermogen:	4 W
Ondersteund aantal accu's/batterijen:	1
Aantal luidsprekers:	1
Volumeregeling:	Digitaal
Levensduur accu/batterij:	6 uur
Aanbevolen gebruik:	Universeel
Impedantie:	4 Ohm
3,5mm-connector:	Ja
Externe adapter:	Ja
USB oplaadpoort:	Ja
Audio-uitgangskanalen:	2.1 kanalen
Aantal drivers:	3
Frequentiebereik:	40 - 18 Hz
Gevoeligheid:	65 dB
AUX ingang:	Ja
Luidspreker soort:	2-weg
Totale harmonische vervorming (THD):	5 procent
Versterker:	Ingebouwd
Diameter woofer:	76.2 mm
Diameter hogetonenluidspreker:	50.8 mm
Opladen via USB:	Ja
Tweeter:	Ja
Separate kanalen:	45 dB
Wifi:	Nee
Batterijen inbegrepen:	Ja
Type product:	2.1 draagbaar luidsprekersysteem
Batterijtechnologie:	Lithium