Microchip XPRO-High-Perf-AT Handleiding

Microchip Niet gecategoriseerd XPRO-High-Perf-AT

Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip XPRO-High-Perf-AT (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

 2021 Microchip Technology Inc. DS50003049A

X-PRO High-Performance

Rubidium Oscillator

User’s Guide

DS50003049A-page 2  2021 Microchip Technology Inc.

Information contained in this publication is provided for the sole

purpose of designing with and using Microchip products. Infor-

mation regarding device applications and the like is provided

only for your convenience and may be superseded by updates.

It is your responsibility to ensure that your application meets

with your specifications.

THIS INFORMATION IS PROVIDED BY MICROCHIP "AS IS".

MICROCHIP MAKES NO REPRESENTATIONS OR WAR-

RANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED,

WRITTEN OR ORAL, STATUTORY OR OTHERWISE,

RELATED TO THE INFORMATION INCLUDING BUT NOT

LIMITED TO ANY IMPLIED WARRANTIES OF NON-

INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A

PARTICULAR PURPOSE OR WARRANTIES RELATED TO

ITS CONDITION, QUALITY, OR PERFORMANCE.

IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDI-

RECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUEN-

TIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND

WHATSOEVER RELATED TO THE INFORMATION OR ITS

USE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS

BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES

ARE FORESEEABLE. TO THE FULLEST EXTENT

ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON

ALL CLAIMS IN ANY WAY RELATED TO THE INFORMATION

OR ITS USE WILL NOT EXCEED THE AMOUNT OF FEES, IF

ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP

FOR THE INFORMATION. Use of Microchip devices in life sup-

port and/or safety applications is entirely at the buyer's risk, and

the buyer agrees to defend, indemnify and hold harmless

Microchip from any and all damages, claims, suits, or expenses

resulting from such use. No licenses are conveyed, implicitly or

otherwise, under any Microchip intellectual property rights

unless otherwise stated.



• Microchip products meet the specifications contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is secure when used in the intended manner and under normal conditions.

• There are dishonest and possibly illegal methods being used in attempts to breach the code protection features of the Microchip

devices. We believe that these methods require using the Microchip products in a manner outside the operating specifications

contained in Microchip's Data Sheets. Attempts to breach th likely, cannot be accomplished ese code protection features, most

without violating Microchip's intellectual property rights.

• Microchip is willing to work with any customer who is concerned about the integrity of its code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of its code. Code protection does not

mean that we are guaranteeing the product ng. We at Microchip are is "unbreakable." Code protection is constantly evolvi

committed to continuously improving the code protection features of our products. Attempts to break Microchip's code protection

feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or

other copyrighted work, you may have a right to sue for relief under that Act.



The Microchip name and logo, the Microchip logo, Adaptec,

AnyRate, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, chipKIT,

chipKIT logo, CryptoMemory, CryptoRF, dsPIC, FlashFlex,

flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck,

LinkMD, maXStylus, maXTouch, MediaLB, megaAVR, Microsemi,

Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer,

PackeTime, PIC, picoPower, PICSTART, PIC32 logo, PolarFire,

Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST,

SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon,

TimeSource, tinyAVR, UNI/O, Vectron, and XMEGA are registered

trademarks of Microchip Technology Incorporated in the U.S.A. and

other countries.

AgileSwitch, APT, ClockWorks, The Embedded Control Solutions

Company, EtherSynch, FlashTec, Hyper Speed Control, HyperLight

Load, IntelliMOS, Libero, motorBench, mTouch, Powermite 3,

Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet-

Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub,

TimePictra, TimeProvider, WinPath, and ZL are registered

trademarks of Microchip Technology Incorporated in the U.S.A.

Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any

Capacitor, AnyIn, AnyOut, Augmented Switching, BlueSky,

BodyCom, CodeGuard, CryptoAuthentication, CryptoAutomotive,

CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net,

Dynamic Average Matching, DAM, ECAN, Espresso T1S,

EtherGREEN, IdealBridge, In-Circuit Serial Programming, ICSP,

INICnet, Intelligent Paralleling, Inter-Chip Connectivity,

JitterBlocker, maxCrypto, maxView, memBrain, Mindi, MiWi,

MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK,

NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net,

PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE,

Ripple Blocker, RTAX, RTG4, SAM-ICE, Serial Quad I/O,

simpleMAP, SimpliPHY, SmartBuffer, SMART-I.S., storClad, SQI,

SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Total

Endurance, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY,

ViewSpan, WiperLock, XpressConnect, and ZENA are trademarks

of Microchip Technology Incorporated in the U.S.A. and other

countries.

SQTP is a service mark of Microchip Technology Incorporated in

the U.S.A.

The Adaptec logo, Frequency on Demand, Silicon Storage

Technology, and Symmcom are registered trademarks of Microchip

Technology Inc. in other countries.

GestIC is a registered trademark of Microchip Technology Germany

II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in

other countries.

All other trademarks mentioned herein are property of their

respective companies.

ISBN: 978-1-5224-7671-9

For information regarding Microchip’s Quality Management Systems,

please visit www.microchip.com/quality.

XPRO USER’S GUIDE

 2021 Microchip Technology Inc. DS50003049A-page 3

Preface

PURPOSE OF THIS GUIDE

This guide provides basic recommendations for designing products that use Micro-

chip's XPRO rubidium oscillators. The guidelines provided are generic because spe-

cific product requirements vary from application to application.

WHO SHOULD READ THIS GUIDE

This document is intended for professionals who are design operating, or ing, installing,

maintaining time, frequency, and synchronization systems having a requirement for a

low-profile and highly-precise frequency generator.

To use this document effectively, a good understanding of digital technologies, analog

frequency generation, and synthesis techniques is helpful.

DOCUMENT LAYOUT

This guide contains the following sections:

•Chapter 1. “Functional Descriptions”: Provides an overview of the product,

describes the major hardware and software features, and lists the system specifi-

cations.

•Chapter 2. “Operation and Installation”: Contains the Principle of Operation,

Start-Up Sequence, and aspects related to first power-up.

•Chapter 3. “Design Integration Considerations”: Provides details on the

design integration considerations for the XPRO device, including thermal consid-

erations, interfaces and grounding, and EMI considerations.

NOTICE TO CUSTOMERS

All documentation becomes dated, and this manual is no exception. Microchip tools and

documentation are constantly evolving to meet customer needs, so some actual dialogs

and/or tool descriptions may differ from those in this document. Please refer to our website

(www.microchip.com) to obtain the latest documentation available.

Documents are identified with a “DS” number. This number is located on the bottom of each

page, in front of the page number. The numbering convention for the DS number is

“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level

of the document.

For the most up-to-date information on development tools, see the MPLAB® IDE online help.

Select the Help menu, and then Topics, to open a list of available online help files.

Product specificaties

Merk:	Microchip
Categorie:	Niet gecategoriseerd
Model:	XPRO-High-Perf-AT

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip XPRO-High-Perf-AT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Microchip

Microchip LE79128 Handleiding

12 Februari 2025

Microchip MCP16418 Handleiding

12 Februari 2025

Microchip LE9632 Handleiding

12 Februari 2025

Microchip HS12-100P0S/12PS25 Handleiding

12 Februari 2025

Microchip HCS301 Handleiding

12 Februari 2025

Microchip HI12-100PAS/12PI30 Handleiding

12 Februari 2025

Microchip HS12-100P0S/12PS30 Handleiding

12 Februari 2025

Microchip HSA2-040SAA/A2324 Handleiding

12 Februari 2025

Microchip LX7176A Handleiding

12 Februari 2025

Microchip LX7176 Handleiding

12 Februari 2025

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Tefal Moulinette Essential MB5201 Handleiding

12 Februari 2025

Tefal Nomad TN3500 Handleiding

12 Februari 2025

Logitech G PRO X TKL Handleiding

11 Februari 2025

PAC OnStar OS-311 Handleiding

11 Februari 2025

IDIS DP-DD1316 Handleiding

11 Februari 2025

IDIS HE-1101 Handleiding

11 Februari 2025

Ergobaby Evolve Toy Bar Handleiding

11 Februari 2025

IDIS DH-2212PF Handleiding

11 Februari 2025

IDIS DA-PI2101 Handleiding

11 Februari 2025

DeWalt DXVCS002 Handleiding

11 Februari 2025