Microchip SY89858U Handleiding

Microchip Niet gecategoriseerd SY89858U

Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip SY89858U (9 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/9
Precision 1:8 LVPECL Fanout
Buffer with Internal Termination
SY89858U Evaluation Board
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
December 2004 M9999-12060
4
hbwhelp@micrel.com or (408) 955-169
0
General Description
The SY89858U evaluation board is designed for
convenient setup and quick evaluation of the
SY89858U. The boards are optimized to interface
directly to a 50 oscilloscope.
For best AC performance, the boards are configured in
AC-coupled in/AC-coupled out configuration. For
applications that require a DC-coupled configuration,
step-by-step instructions for modifying the board are
included.
Data sheets and support documentation can be found
on Micrel’s web site at www.micrel.com.
Features
• Fully assembled and tested SY89858U
• +2.5V or +3.3V power supply
• AC-coupled configuration for ease-of-use
• I/O interface includes on-board termination
• Fully assembled and tested
• Can be reconfigured for DC-coupling operation
Related Documentation
• SY89858U Precision 1:8 LVPECL Fanout Buffer with
Internal Termination
_________________________________________________________________________________________________________
Evaluation Board
Micrel, Inc. SY89858U Evaluation Board
December 2004 2M9999-12060
4
hbwhelp@micrel.com or (408) 955-169
0
Evaluation Board Description
The default configuration for the SY89858U board is
the AC-coupled. The choice between AC-coupled and
DC-coupled configurations offers the user flexibility for
specific applications.
AC-Coupled Evaluation Board
The AC-coupled configuration is suited to most
customer applications and is preferred by the majority
of users because of its ease-of-use. It requires only a
single power supply and offers the most flexibility in
interfacing to a variety of signal sources.
The DC-bias levels and AC-coupling capacitors are
supplied on-board for each input, making it
unnecessary to vary the offset voltage or change any
components on the board as the power supply voltage
varies over the +2.5V +5% and +3.3V +10% operating
range. The user needs only to supply a minimum input
voltage swing and the bias voltage will automatically
adjust the input to the correct level as the power
supply voltage varies.
DC-Coupled Evaluation Board
For applications that are not suited to AC-coupling,
such as clock that can be turned off for extended
periods of time, the board can be user-configured for
DC-coupled operation.
This can be accomplished by modifying the board to
use two power supplies into a “split-supply
configuration.” Since LVPECL is referenced to VCC,
and standard PECL termination is 50W to VCC-2V.
Split-supply is an easy method to interface to a 50W
(to ground) scope. Therefore, a 3.3V supply will be
split into +2V and -1.3V, and a 2.5V supply will be split
into a +2V and -0.5V.
The +2V offset in this two-power supply configuration
then provides the correct terminations for the device
by setting the Ground potential on the board to be
exactly 2 volts below the VCC supply. The VEE voltage
is then set to –1.3V for 3.3V devices, or –0.5V for
2.5V devices to ensure proper VCC to VEE voltage
difference.
Any-Input Interface
The unique internal input termination sets the input
common mode voltage. This enables the input to
interface with any differential signal over the supply
voltage without modifying the board.
Micrel, Inc. SY89858U Evaluation Board
December 2004 3M9999-12060
4
hbwhelp@micrel.com or (408) 955-169
0
Evaluation Board
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
24
23
22
21
20
19
18
17
32
31
30
29
28
27
26
25
SY89858U
(Thermal Pad to be
soldered to VEE Plane)
V
EE
V
CC
C15
VCC
GND
IN
VT
VREF-AC
/IN
GND
VCC
VCC
/Q7
Q7
/Q6
Q6
/Q5
Q5
VCC
GND
VCC
Q3
/Q3
Q4
/Q4
VCC
GND
VCC
Q0
/Q0
Q1
/Q1
Q2
/Q2
VCC
GND
R5R6
C18
C3
C4
C15
C16C17
R4
C22
R1 R2
R3
SMA4
SMA3
SMA2 SMA1
SMA8
SMA7
SMA6
C6 C7
SMA5
C11
C10
C14
C9
C8
C5
C19 C12
C2C1
C13
C20
J3
J2
J1
AC-Coupled Evaluation Board
I/O Power Supply VCC GND VEE
AC-Coupled Input/AC-Coupled Output 2.5V +2.5V 0V 0V
AC-Coupled Input/AC-Coupled Output 3.3V +3.3V 0V 0V
Table 1. AC-Coupled Evaluation Board Power Supply Connections

Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: SY89858U

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip SY89858U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Microchip

Microchip

Microchip EVB-USB2504 Handleiding

17 November 2024
Microchip

Microchip AT97SC3204 Handleiding

17 November 2024
Microchip

Microchip ATECC608B Handleiding

16 Juli 2024
Microchip

Microchip HV860 Handleiding

16 Juli 2024
Microchip

Microchip EVB-LAN9255 Handleiding

16 Juli 2024
Microchip

Microchip LX4580 Handleiding

16 Juli 2024
Microchip

Microchip LX7720 Handleiding

16 Juli 2024
Microchip

Microchip AT32UC3C0128C Handleiding

10 April 2024
Microchip

Microchip AT32UC3C1512C Handleiding

10 April 2024
Microchip

Microchip AT32UC3A3256 Handleiding

10 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024