Microchip PIC32CX2051MTSH128 Handleiding

Microchip Niet gecategoriseerd PIC32CX2051MTSH128

Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip PIC32CX2051MTSH128 (21 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
© 2022 Microchip Technology Inc.
and its subsidiaries
User Guide DS50003460A-page 1
PIC32CXMTx
Microchip PIC32CXMTx Metrology User Guide
Introduction
This document explains how to use the Microchip Metrology library, and it is considered as a complement of the
Microchip Metrology data sheet. It describes the calibration procedure as well as other complex features of the
library, like the waveform capture.
For more detailed information, refer to the full description of the registers of the Microchip Metrology data sheet.
PIC32CXMTx
© 2022 Microchip Technology Inc.
and its subsidiaries
User Guide DS50003460A-page 2
Table of Contents
Introduction.....................................................................................................................................................1
1. Configuration...........................................................................................................................................3
1.1. Current Conversion Factor...........................................................................................................3
1.2. Voltage Conversion Factor...........................................................................................................4
1.3. Swell and Sag.............................................................................................................................. 4
1.4. Pulse Test Constant..................................................................................................................... 4
1.5. CF Pulses.....................................................................................................................................5
1.6. Creep (Start-up/No load).............................................................................................................. 5
1.7. EMAFE......................................................................................................................................... 6
1.8. Other Features............................................................................................................................. 6
2. Calibration............................................................................................................................................... 7
2.1. Magnitude.....................................................................................................................................7
2.2. Phase Delay................................................................................................................................. 8
2.3. Power Offset...............................................................................................................................12
2.4. Conclusions................................................................................................................................13
3. Metrology Firmware Special Function...................................................................................................14
3.1. Waveform Capture..................................................................................................................... 14
3.2. Harmonic Analysis......................................................................................................................15
4. Monitor Metrology Firmware................................................................................................................. 16
5. Revision History.................................................................................................................................... 17
5.1. Rev A - 12/2022......................................................................................................................... 17
Microchip Information................................................................................................................................... 18
The Microchip Website..........................................................................................................................18
Product Change Notification Service.................................................................................................... 18
Customer Support................................................................................................................................. 18
Microchip Devices Code Protection Feature.........................................................................................18
Legal Notice.......................................................................................................................................... 18
Trademarks........................................................................................................................................... 19
Quality Management System................................................................................................................ 20
Worldwide Sales and Service................................................................................................................21
PIC32CXMTx
Configuration
© 2022 Microchip Technology Inc.
and its subsidiaries
User Guide DS50003460A-page 3
1. Configuration
1.1 Current Conversion Factor
1.1.1 Current Transformer (CT)
KIx =Kcoil
GPGA × RLOAD
Where:
Kcoil is the CT transformer ratio
GPGA is the ADC current channel gain
RLOAD is the total burden resistance
Example:
If Kcoil = 1000, GPGA = 1 and RLOAD = 3.24 Ohm, then this is possible:
Klx = 1000 / (1 * 3.24) = 308.642
The metrology firmware uses uQ22.10 to represent both integer and fractional numbers; therefore, it is recommended
that this be set:
K_lx = ROUND(308.642 * 2^10) = 0x0004D291
1.1.2 Resistive Shunt
KIx =1
GPGA × Rs untℎ
Example:
If Rshunt = 100 uOhm = 0.0001 Ohm and GPGA = 8, then this is possible:
Klx = 1000000 / (8 * 100) = 1250
The metrology firmware uses uQ22.10 to represent both integer and fractional numbers; therefore, it is recommended
that this be set:
K_lx = ROUND(1250 * 2^10) = 0x00138800
1.1.3 Rogowski Coil
KIx =KRogowski (60 )Hz
GPGA
Where KRogowski(60 Hz) is Rogowski coil scale factor at 60 Hz.
Note: The scale factor KRogowski is defined at the reference frequency fr = 60 Hz because the DI (Digital Integrator)
filter was designed for unity gain at 60 Hz. If it is desired to use K
Rogowski defined at another frequency, the gain of the
DI filter must be accounted for in the computation as follows:
KIx =KRogowski ( )f
GPGA × _ ( )K di f
Where = 60 Hz/f.K_di(f)
For example, a Rogowski coil is used with an output of 500 uV/A at 60 Hz (or 416.6 uV/A at 50 Hz) and a G
PGA = 4,
then,


Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: PIC32CX2051MTSH128

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip PIC32CX2051MTSH128 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Microchip

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd