Microchip MGC3130 Handleiding

Microchip Niet gecategoriseerd MGC3130

Lees hieronder de đź“– handleiding in het Nederlandse voor Microchip MGC3130 (59 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/59
Aurea GUI User's Guide
Aurea Graphical User Interface User's Guide
Preface
Introduction
This document provides a guide to the use of the Aurea tool with Microchip Gesture ICs.
Recommended Reading
For the latest information on using the device, read the “ ” file (an HTML file) in the AureaReadme.html
installation directory. The release notes (Readme) contains update information and known issues that
may not be included in this user’s guide.
This user’s guide describes how to use the Aurea Graphical User Interface. Other useful documents are
listed below. The following Microchip documents are available and recommended as supplemental
reference resources.
• “ ” (DS40002037) – Consult this document for informationMGC3140 3D Gesture Controller Data Sheet
regarding the MGC3140 3D Gesture Controller.
• “GestIC® Design Guide” (DS40001716) – This document describes the GestIC system characteristic
parameters and the design process. It enables the user to generate a good electrode design and to
parameterize the full GestIC system.
• “MGC3140 GestIC® Library Interface Description User’s Guide” (DS40001875) – This document is the
interface description of the MGC3140’s GestIC Library. It outlines the function of the Library’s message
interface and contains the complete message reference to control and operate the MGC3140 system.
Description
The Aurea evaluation software demonstrates Microchip’s GestIC® technology and its features and
applications. Aurea provides visualization of MGC3XX0 generated data and access to GestIC Library
controls and configuration parameters. It provides the following:
• Visualization of hand position and user gestures
• Visualization of sensor data
• Run-Time Control of sensor features
• MGC3XX0 GestIC Library update
• Analog Front-End parameterization
• Colibri Signal Processing parameterization
• Logging of sensor values and storage in a log file
Software License Information
Copyright (C) 2013 Microchip Technology Inc. and its subsidiaries (“Microchip”). All rights reserved.
© 2018 Microchip Technology Inc. User Guide DS40001681E-page 1
You are permitted to use the Aurea software, MGC3140 Software Development Kit and other accompanying
software with Microchip products. Refer to the license agreement accompanying this software, if any, for
additional info regarding your rights and obligations.
SOFTWARE AND DOCUMENTATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO
EVENT SHALL MICROCHIP, SMSC, OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER
CONTRACT, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
LEGAL EQUITABLE THEORY FOR ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES INCLUDING
BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, OR
OTHER SIMILAR COSTS.
Aurea GUI User's Guide
© 2018 Microchip Technology Inc. User Guide DS40001681E-page 2
Table of Contents
Preface............................................................................................................................ 1
Description.......................................................................................................................1
Software License Information..........................................................................................1
1. Overview....................................................................................................................4
1.1. Aurea Installation..........................................................................................................................4
1.2. Running Aurea............................................................................................................................. 4
1.3. MGC3x30 and MGC3140 differences.......................................................................................... 4
1.4. Aurea Graphical User Interface....................................................................................................5
2. Aurea Tabs................................................................................................................ 8
2.1. Colibri Suite Tab........................................................................................................................... 8
2.2. Signals Visualization Tab............................................................................................................15
2.3. Setup Tab................................................................................................................................... 18
2.4. Demo Tab................................................................................................................................... 49
3. Advanced Aurea Features.......................................................................................51
3.1. Logging Sensor Data..................................................................................................................51
4. Revision History.......................................................................................................54
5. Appendix A - Glossary.............................................................................................55
The Microchip Web Site................................................................................................ 56
Customer Change Notification Service..........................................................................56
Customer Support......................................................................................................... 56
Microchip Devices Code Protection Feature................................................................. 56
Legal Notice...................................................................................................................57
Trademarks................................................................................................................... 57
Quality Management System Certified by DNV.............................................................58
Worldwide Sales and Service........................................................................................59
© 2018 Microchip Technology Inc. User Guide DS40001681E-page 3

Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: MGC3130

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip MGC3130 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Microchip

Microchip

Microchip EVB-USB2504 Handleiding

17 November 2024
Microchip

Microchip AT97SC3204 Handleiding

17 November 2024
Microchip

Microchip ATECC608B Handleiding

16 Juli 2024
Microchip

Microchip HV860 Handleiding

16 Juli 2024
Microchip

Microchip EVB-LAN9255 Handleiding

16 Juli 2024
Microchip

Microchip LX4580 Handleiding

16 Juli 2024
Microchip

Microchip LX7720 Handleiding

16 Juli 2024
Microchip

Microchip AT32UC3C0128C Handleiding

10 April 2024
Microchip

Microchip AT32UC3C1512C Handleiding

10 April 2024
Microchip

Microchip AT32UC3A3256 Handleiding

10 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024