Microchip MAC-SA5X-KIT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip MAC-SA5X-KIT (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
2019 - 2024
Microchip Technology Inc. and its subsidiaries
DS50002938E
Miniature Atomic Clock (MAC)
SA5X
User’s Guide
DS50002938E-page 2
2019 - 2024
Microchip Technology Inc. and its subsidiaries
This publication and the information herein may be used only
with Microchip products, including to design, test, and integrate
Microchip products with your application. Use of this informa-
tion in any other manner violates these terms. Information
regarding device applications is provided only for your conve-
nience and may be superseded by updates. It is your responsi-
bility to ensure that your application meets with your
specifications. Contact your local Microchip sales office for
additional support or, obtain additional support at https://
www.microchip.com/en-us/support/design-help/client-support-
services.
THIS INFORMATION IS PROVIDED BY MICROCHIP "AS IS".
MICROCHIP MAKES NO REPRESENTATIONS OR WAR-
RANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED,
WRITTEN OR ORAL, STATUTORY OR OTHERWISE,
RELATED TO THE INFORMATION INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTIES OF NON-
INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A
PARTICULAR PURPOSE, OR WARRANTIES RELATED TO
ITS CONDITION, QUALITY, OR PERFORMANCE.
IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDI-
RECT, SPECIAL, PUNITIVE, INCIDENTAL, OR CONSE-
QUENTIAL LOSS, DAMAGE, COST, OR EXPENSE OF ANY
KIND WHATSOEVER RELATED TO THE INFORMATION OR
ITS USE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS
BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES
ARE FORESEEABLE. TO THE FULLEST EXTENT
ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON
ALL CLAIMS IN ANY WAY RELATED TO THE INFORMATION
OR ITS USE WILL NOT EXCEED THE AMOUNT OF FEES, IF
ANY, THAT YOU HAVE PAID DIRECTLY TO MICROCHIP
FOR THE INFORMATION.
Use of Microchip devices in life support and/or safety applica-
tions is entirely at the buyer's risk, and the buyer agrees to
defend, indemnify and hold harmless Microchip from any and
all damages, claims, suits, or expenses resulting from such
use. No licenses are conveyed, implicitly or otherwise, under
any Microchip intellectual property rights unless otherwise
stated.
Note the following details of the code protection feature on Microchip products:
Microchip products meet the specifications contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is secure when used in the intended manner, within operating specifications, and
under normal conditions.
Microchip values and aggressively protects its intellectual property rights. Attempts to breach the code protection features of
Microchip product is strictly prohibited and may violate the Digital Millennium Copyright Act.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of its code. Code protection does not
mean that we are guaranteeing the product is "unbreakable" Code protection is constantly evolving. Microchip is committed to
continuously improving the code protection features of our products.
Trademarks
The Microchip name and logo, the Microchip logo, Adaptec, AVR,
AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory,
CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq,
Kleer, LANCheck, LinkMD, maXStylus, maXTouch, MediaLB,
megaAVR, Microsemi, Microsemi logo, MOST, MOST logo,
MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo,
PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity,
SpyNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer,
Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, and XMEGA are
registered trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
AgileSwitch, APT, ClockWorks, The Embedded Control Solutions
Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight
Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge,
ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire,
SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub,
TimePictra, TimeProvider, TrueTime, and ZL are registered
trademarks of Microchip Technology Incorporated in the U.S.A.
Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any
Capacitor, AnyIn, AnyOut, Augmented Switching, BlueSky,
BodyCom, Clockstudio, CodeGuard, CryptoAuthentication,
CryptoAutomotive, CryptoCompanion, CryptoController,
dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM,
ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-
Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling,
IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display,
KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF,
MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach,
Omniscient Code Generation, PICDEM, PICDEM.net, PICkit,
PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple
Blocker, RTAX, RTG4, SAM-ICE, Serial Quad I/O, simpleMAP,
SimpliPHY, SmartBuffer, SmartHLS, SMART-I.S., storClad, SQI,
SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Total
Endurance, Trusted Time, TSHARC, USBCheck, VariSense,
VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, and
ZENA are trademarks of Microchip Technology Incorporated in the
U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in
the U.S.A.
The Adaptec logo, Frequency on Demand, Silicon Storage
Technology, and Symmcom are registered trademarks of Microchip
Technology Inc. in other countries.
GestIC is a registered trademark of Microchip Technology Germany
II GmbH & Co. KG, a subsidiary of Microchip Technology Inc., in
other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2019 - 2024, Microchip Technology Incorporated and its subsidiar-
ies.
All Rights Reserved.
ISBN: 978-1-6683-4328-9
For information regarding Microchip’s Quality Management Systems,
please visit www.microchip.com/quality.
MAC-SA5X USER’S GUIDE
2019 - 2024 Microchip Technology Inc. and its subsidiaries DS50002938E-page 3
Preface
PURPOSE OF THIS GUIDE
The MAC-SA5X User's Guide provides basic recommendations for designing products
to use Microchip's Miniature Atomic Clock (MAC) SA5X. The guidelines in the docu-
ment are generic because specific product requirements vary between applications.
This material consists of a brief description of SA5X design supported by block dia-
grams, description of environmental issues, installation guidelines, and unit operation.
WHO SHOULD READ THIS GUIDE
This document is intended for engineers and telecommunications professionals who
are designing, installing, operating, or maintaining time, frequency, and synchroniza-
tion systems that require a low profile and highly precise frequency generator.
To use this document effectively, you must have a good understanding of digital tele-
communications technologies, analog frequency generation, and synthesis tech-
niques.
DOCUMENT LAYOUT
This guide contains the following sections and appendixes:
Chapter 1. “Product Overview”: Provides an overview of the product, describes
the major hardware and software features, and lists the system specifications.
Chapter 2. “Installation”: Contains procedures for unpacking and installing the
system, and for powering up the unit.
Chapter 3. “Operation”: Describes procedures for frequency adjustment and
toggling on/off various features.
Chapter 4. “Command Line Interface”: Describes the CLI command conven-
tions, functions, and features.
Chapter 5. “Maintenance and Troubleshooting”: Contains maintenance and
troubleshooting procedures for the product. Also contains procedures for return-
ing the MAC.
Appendix A. “Principle of Operation”: Briefly explains Atomic Interrogation and
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB® IDE online help.
Select the Help menu, and then Topics, to open a list of available online help files.


Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: MAC-SA5X-KIT

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip MAC-SA5X-KIT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Microchip

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd