Microchip LAN8650 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip LAN8650 (46 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/46
2023 Microchip Technology Inc. and its subsidiaries DS00004964A-page 1
1.0 INTRODUCTION
The LAN865x is a high-performance 10BASE-T1S MAC-PHY Ethernet Controller with SPI that is targeted for
10 Mbit/s half-duplex networking over a single pair of conductors.
This document guides you in creating a sample TCP/IP Client node (bare-metal or FreeRTOS™ based), using the
LAN865x MAC-PHY. It describes how to configure the MAC-PHY in either Physical Layer Collision Avoidance (PLCA)
or Carrier-Sense Multiple Access/Collision Detection (CSMA/CD) mode.
The description in this document is based on an ATSAME54P20A running on a SAM E54 Curiosity Ultra Development
Board [4]. However, it can also be applied to other infrastructures; for example, to an ATSAME70Q21B running on a
SAM E70 Xplained Ultra Evaluation Kit [5].
1.1 Audience
This document is written for developers who want to create a sample TCP/IP Client node, using the LAN865x
MAC-PHY. Developers should be familiar with the infrastructure of MPLAB
® X IDE and its plug-ins [1].
1.2 Prerequisites
The following software components are required for getting started and to configure the example described in this doc-
ument:
MPLAB X IDE
https://www.microchip.com/en-us/tools-resources/develop/mplab-x-ide
• MPLAB XC32
https://www.microchip.com/en-us/tools-resources/develop/mplab-xc-compilers
MPLAB Code Configurator (MCC)
https://www.microchip.com/en-us/tools-resources/configure/mplab-code-configurator
1.3 References
The following sources should be referenced when using this application note.
[1] MPLAB Code Configurator
https://www.microchip.com/en-us/tools-resources/configure/mplab-code-configurator
[2] MPLAB Code Configurator Getting Started
https://microchipdeveloper.com/mcc:start
[3] MPLAB XC Compiler Documentation
https://www.microchip.com/en-us/tools-resources/develop/mplab-xc-compilers/downloads-documentation#XC32
[4] SAM E54 Curiosity Ultra Development Board
https://www.microchip.com/Developmenttools/ProductDetails/DM320210
[5] SAM E70 Xplained Ultra Evaluation Kit
https://www.microchip.com/Developmenttools/ProductDetails/DM320113
AN4964
MPLAB® Harmony v3 LAN865x Driver Example
AN4964
DS00004964A-page 2 2023 Microchip Technology Inc. and its subsidiaries
1.4 Abbreviations
Abbreviation Definition
CSMA/CD Carrier-Sense Multiple Access/Collision Detection
EDBG Embedded Debugger
MCC MPLAB Code Configurator
NVIC Nested Vectored Interrupt Controller
PLCA Physical Layer Collision Avoidance
2023 Microchip Technology Inc. and its subsidiaries DS00004964A-page 3
AN4964
2.0 CREATE A NEW MCC HARMONY PROJECT
2.1 Create a New Project
1. Open MPLAB X IDE.
2. Create a new project by either
a) clicking the new project icon or
b) by selecting File > New Project.
3. In the “New Project” window:
a) Select “32-bit MCC Harmony Project”.
b) Click Next.


Product specificaties

Merk: Microchip
Categorie: Niet gecategoriseerd
Model: LAN8650

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip LAN8650 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Microchip

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd