Microchip AVR128DA64 Handleiding

Microchip Niet gecategoriseerd AVR128DA64

Lees hieronder de 📖 handleiding in het Nederlandse voor Microchip AVR128DA64 (167 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/167

AVR® Instruction Set Manual

Introduction

This manual gives an overview and explanation of every instruction available for 8-bit AVR

® devices. Each instruction

has its own section containing functional description, it’s opcode, and syntax, the end state of the status register, and

cycle times.

The manual also contains an explanation of the different addressing modes used by AVR devices and an appendix

listing all modern AVR devices and what instruction it has available.

Table of Contents

Introduction.....................................................................................................................................................1

1. Instruction Set Nomenclature..................................................................................................................6

2. CPU Registers Located in the I/O Space................................................................................................8

2.1. RAMPX, RAMPY, and RAMPZ.....................................................................................................8

2.2. RAMPD........................................................................................................................................ 8

2.3. EIND.............................................................................................................................................8

3. The Program and Data Addressing Modes.............................................................................................9

3.1. Register Direct, Single Register Rd..............................................................................................9

3.2. Register Direct - Two Registers, Rd and Rr................................................................................. 9

3.3. I/O Direct.................................................................................................................................... 10

3.4. Data Direct................................................................................................................................. 10

3.5. Data Indirect............................................................................................................................... 11

3.6. Data Indirect with Pre-decrement............................................................................................... 11

3.7. Data Indirect with Post-increment.............................................................................................. 12

3.8. Data Indirect with Displacement.................................................................................................12

3.9. Program Memory Constant Addressing using the LPM, ELPM, and SPM Instructions............. 13

3.10. Program Memory with Post-increment using the LPM Z+ and ELPM Z+ Instruction................. 13

3.11. Store Program Memory Post-increment.....................................................................................14

3.12. Direct Program Addressing, JMP and CALL.............................................................................. 14

3.13. Indirect Program Addressing, IJMP and ICALL..........................................................................15

3.14. Extended Indirect Program Addressing, EIJMP and EICALL.....................................................15

3.15. Relative Program Addressing, RJMP and RCALL..................................................................... 16

4. Conditional Branch Summary............................................................................................................... 17

5. Instruction Set Summary.......................................................................................................................18

6. Instruction Description...........................................................................................................................24

6.1. ADC – Add with Carry................................................................................................................ 24

6.2. ADD – Add without Carry........................................................................................................... 25

6.3. ADIW – Add Immediate to Word................................................................................................ 26

6.4. AND – Logical AND....................................................................................................................27

6.5. ANDI – Logical AND with Immediate..........................................................................................28

6.6. ASR – Arithmetic Shift Right...................................................................................................... 29

6.7. BCLR – Bit Clear in SREG......................................................................................................... 30

6.8. BLD – Bit Load from the T Bit in SREG to a Bit in Register....................................................... 31

6.9. BRBC – Branch if Bit in SREG is Cleared..................................................................................32

6.10. BRBS – Branch if Bit in SREG is Set......................................................................................... 33

6.11. BRCC – Branch if Carry Cleared................................................................................................34

6.12. BRCS – Branch if Carry Set....................................................................................................... 35

6.13. BREAK – Break..........................................................................................................................36

6.14. BREQ – Branch if Equal.............................................................................................................36

6.15. BRGE – Branch if Greater or Equal (Signed).............................................................................37

6.16. BRHC – Branch if Half Carry Flag is Cleared.............................................................................38

AVR® Instruction Set Manual

6.17. BRHS – Branch if Half Carry Flag is Set....................................................................................39

6.18. BRID – Branch if Global Interrupt is Disabled............................................................................ 40

6.19. BRIE – Branch if Global Interrupt is Enabled............................................................................. 41

6.20. BRLO – Branch if Lower (Unsigned).......................................................................................... 42

6.21. BRLT – Branch if Less Than (Signed)........................................................................................43

6.22. BRMI – Branch if Minus..............................................................................................................44

6.23. BRNE – Branch if Not Equal...................................................................................................... 45

6.24. BRPL – Branch if Plus................................................................................................................46

6.25. BRSH – Branch if Same or Higher (Unsigned).......................................................................... 47

6.26. BRTC – Branch if the T Bit is Cleared........................................................................................48

6.27. BRTS – Branch if the T Bit is Set............................................................................................... 49

6.28. BRVC – Branch if Overflow Cleared.......................................................................................... 50

6.29. BRVS – Branch if Overflow Set..................................................................................................51

6.30. BSET – Bit Set in SREG............................................................................................................ 52

6.31. BST – Bit Store from Bit in Register to T Bit in SREG................................................................53

6.32. CALL – Long Call to a Subroutine..............................................................................................54

6.33. CBI – Clear Bit in I/O Register....................................................................................................55

6.34. CBR – Clear Bits in Register...................................................................................................... 56

6.35. CLC – Clear Carry Flag..............................................................................................................57

6.36. CLH – Clear Half Carry Flag...................................................................................................... 57

6.37. CLI – Clear Global Interrupt Enable Bit...................................................................................... 58

6.38. CLN – Clear Negative Flag........................................................................................................ 59

6.39. CLR – Clear Register................................................................................................................. 60

6.40. CLS – Clear Sign Flag................................................................................................................61

6.41. CLT – Clear T Bit........................................................................................................................62

6.42. CLV – Clear Overflow Flag.........................................................................................................62

6.43. CLZ – Clear Zero Flag................................................................................................................63

6.44. COM – One’s Complement........................................................................................................ 64

6.45. CP – Compare............................................................................................................................65

6.46. CPC – Compare with Carry........................................................................................................66

6.47. CPI – Compare with Immediate................................................................................................. 67

6.48. CPSE – Compare Skip if Equal..................................................................................................68

6.49. DEC – Decrement...................................................................................................................... 69

6.50. DES – Data Encryption Standard...............................................................................................71

6.51. EICALL – Extended Indirect Call to Subroutine......................................................................... 72

6.52. EIJMP – Extended Indirect Jump............................................................................................... 73

6.53. ELPM – Extended Load Program Memory.................................................................................73

6.54. EOR – Exclusive OR.................................................................................................................. 75

6.55. FMUL – Fractional Multiply Unsigned........................................................................................ 76

6.56. FMULS – Fractional Multiply Signed.......................................................................................... 77

6.57. FMULSU – Fractional Multiply Signed with Unsigned................................................................79

6.58. ICALL – Indirect Call to Subroutine............................................................................................80

6.59. IJMP – Indirect Jump..................................................................................................................81

6.60. IN - Load an I/O Location to Register.........................................................................................82

6.61. INC – Increment......................................................................................................................... 83

6.62. JMP – Jump............................................................................................................................... 84

6.63. LAC – Load and Clear................................................................................................................85

6.64. LAS – Load and Set................................................................................................................... 86

AVR® Instruction Set Manual

Product specificaties

Merk:	Microchip
Categorie:	Niet gecategoriseerd
Model:	AVR128DA64

Heb je hulp nodig?

Als je hulp nodig hebt met Microchip AVR128DA64 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Microchip

Microchip EVB-USB2504 Handleiding

17 November 2024

Microchip AT97SC3204 Handleiding

17 November 2024

Microchip ATECC608B Handleiding

16 Juli 2024

Microchip HV860 Handleiding

16 Juli 2024

Microchip EVB-LAN9255 Handleiding

16 Juli 2024

Microchip LX4580 Handleiding

16 Juli 2024

Microchip LX7720 Handleiding

16 Juli 2024

Microchip AT32UC3C0128C Handleiding

10 April 2024

Microchip AT32UC3C1512C Handleiding

10 April 2024

Microchip AT32UC3A3256 Handleiding

10 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024