Mettler-Toledo XP Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Mettler-Toledo XP (2 pagina's) in de categorie Weegschaal. Deze handleiding was nuttig voor 84 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Weighing Setup: For more precision / shorter stability time
On
Off
Example
On
Off
G
H
B
C C C
D
XP Balance
I
XS Balance
Short Operating Instructions
For further information, please refer to the operators Manual
METTLER TOLEDO
XP / XS Analytical- and Precision Balances
Basic Functions:
Switching on
and off
Display
1. Switch on display:
Press the « » On/Off
key briefly. The display
performs a test and is
then ready to weigh.
2. Switch off Display;
Press and hold the
« » key until the On/Off
message OFF” ap-
pears in the display.
The display then fades
and the balance is
switched off.
User Profile: *only XP
Choose
User Profile
This key can be used to
call up the desired user
profile. Different settings
can be stored in a user
profile.
Zero
Display
Zero ing: Pres s the
« » to set a new G
zero point.
Always use the « » G
before you start the
weighing procedure.
Tare
Display
Taring: If you work with
a Tare container, first
zero the balance. Then
put the Tare container
on the balance and
press « », to tare H
the balance.
Weighing-
Applications
Choose the applica-
tion: If you want to
change the application,
then press the applica-
tion menu button and
choose another ap-
plication.
Levelling, Internal
Adjustment
(Factory setting)
1. Level indicator is built-
in in the device.
2. Level indicator is not
centered.*
3. Release the clamps.*
4. Levelling. After this pro-
cess, lock the clamps
again.*
5. Internal Adjustment
Pressing this function
key triggers a balance
adjustment using the
bui lt-in cali bra tio n
weight. This can be
implemented at any
time.
*
depending on balance
Weighing filters:
Weighing mode
1. Choose System-Set-
up
2. Define Weighing pa-
rameters
3. Define the Weighing
mode
Advise:
Solids:
«Universal»
Powder, Liquid:
«Dosing»
Weighing filters:
Environment
1. Choose System-Set-
up
2. Define Weighing pa-
rameters
3. Define Environment
Advise:
Fume cupboard – un-
stable weighing table:
«
Unstable»,
«Very unstable»
Stable Weighing table,
no drafts
«Standard», «Stable»
Weighing filters:
Value Release
1. Choose System-Set-
up
2. Define Weighing pa-
rameters
3. Define Value Release
Advise:
Highest Precision:
«Very reliable»
Fast Value Release:
«Very fast»,
but less precision
Test:Additional Functions:
EXCELLENCE PLUS
One touch
- change the time
On touch
- e.g. start the internal adjustment
On touch
- e.g. start the internal adjustment
METTLER TOLEDO Excellence Plus and Excellence Balances
Overview of the Terminal XP Analytical- and Precision balances:
XP Display Ter-
minal
1. Button SmartSens:
Each of these two
contact-free sensors
can be assigned a key
or menu function.
2. Button Home:
This key can be used
to return to the “Home”
user profile from any
menu level in any
application.
3. Button User profile:
This key can be used
to call up the desired
user profile. Different
settings can be stored
in a user profile.
1
4
6
7
8
4. Status bar:
If the left or right
SmartSens is as-
signed a key func-
tion, then the cor-
responding symbol
is highlighted.
5. System-Setup:
Define the basic
settings.
6. Select the applica-
tion.
7. Button Applications-
Setup:
Each application
can be optimized
to the current task
using a number of
settings.
8. Printer:
Pressing this key
transmits data via
the interface.
XS Display Ter-
minal
1. Button Home:
This key can be used
to return to the “Home”
user profile from any
menu level in any
application.
2. Weighing application:
By pressing this symbol
you can choose the
desired application.
3. Button Applications-
Setup:
Each application can
be ideally adapted to
the current task using
a number of settings.
3
4
4. Printer:
Pressing this key
transmits data via
the interface.
Overview of the Terminal XS Analytical- and Precision balances:
© Mettler-Toledo AG 2008 11781027 Printed in Switzerland 0807/7.12
Mettler-Toledo AG, Laboratory & Weighing Technologies, CH-8606 Greifensee, Switzerland
Phone +41-44-944 22 11, Fax +41-44-944 30 60, Internet: http://www.mt.com
*11781027*
1
2
3
4
5
1
2


Product specificaties

Merk: Mettler-Toledo
Categorie: Weegschaal
Model: XP

Heb je hulp nodig?

Als je hulp nodig hebt met Mettler-Toledo XP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Weegschaal Mettler-Toledo

Handleiding Weegschaal

Nieuwste handleidingen voor Weegschaal