Metra JP-1018 Handleiding

Metra Speaker JP-1018

Lees hieronder de 📖 handleiding in het Nederlandse voor Metra JP-1018 (16 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Metra. The World’s Best Kits.®MetraOnline.com © COPYRIGHT 202 METRA ELECTRONICS CORPORATION 4
I N S TA L L AT I O N I N S T R U C T I O N S
J -101P 8
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory r adio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
• Driver and passenger specific lower dash grilles
•Cut templates and hardware
•ABS injection molded, silver painted surround
•Metal stamped grille insert
•Used with OE or JP-1014 speaker upgrade dash pods
•1 year warranty from defects
KIT COMPONENTS
• A) • B) Template (Left & Right) Cut-in grilles (Left & Right) • C) Backing plates (Left & Right)
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver
•7mm and 13mm socket
TABLE OF CONTENTS
Left dash Disassembly ...................................... 2-3
Dash cut-in...................................................................4-5
Passenger side Disassembly....................... ...... 6-7
Jeep Wrangler (JL) 2018-2023,
Jeep Gladiator 2020-2 302
Visit for more detailed information about the product and up-to-date MetraOnline.com
vehicle specific applications
KIT FEATURES
ACB
REV. 1/17/2024 1
Dash cut-in...................................................... .................8
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unclip and remove the panel below the
steering column. Remove (2) Phillips
screw exposed. (Figures A,B)
2. Unclip, unplug, and remove the climate
control panel. (Figure C)
(Figure D)
(Figure E)
3. Remove (2) Phillips screws securing
the radio trim panel, then unclip and
remove. (Figure D)
4. Remove (1) Phillips screw securing the
dash pad, then unclip and remove.
(Figure E)
(Figure A)
(Figure B)
(Figure C)
REV. INSTJP-10181/17/2024 3
DASH DISASSEMBLY
5.Remove (8) Phillips screws securing the
instrument panel on the left side, and
airbag panel on the right side.
(Figure F, G)
6.Unclip the steering column shroud then
set aside. (Figure H)
Driver’s side removal:
7.Open the driver’s door, then unclip and
remove the panel on the side of the
dash. Remove (5) Phillips screws
exposed. (Figure I)
8.Remove (5) Phillips screws securing
the speaker panel, then unclip and
remove. (Figure J)
(Figure I)
(Figure F)
(Figure G)
(Figure H) (Figure J)
Tip
Tip
Tip
TipTip:
:
:
: : Now would be an excellent time to install
a pair of JP-1014 6.5" speaker pods. For more
information scan the QR code below.


Product specificaties

Merk: Metra
Categorie: Speaker
Model: JP-1018

Heb je hulp nodig?

Als je hulp nodig hebt met Metra JP-1018 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Metra

Metra

Metra BC-HDLFP Handleiding

11 September 2024
Metra

Metra JP-1018 Handleiding

11 September 2024

Handleiding Speaker

Nieuwste handleidingen voor Speaker