Meridian 810 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Meridian 810 (70 pagina's) in de categorie Videocassetterecorder. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/70
810 Reference Video System
User Guide
ii
Preface
Important safety instructions – 810 Projector
Important information
WARNING: TO PREVENT FIRE OR SHOCK
HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
WARNING: THIS APPARATUS MUST BE EARTHED.
CAUTION: To reduce the risk of electric shock, do
not remove cover. Refer servicing to qualified service
personnel.
This projector is equipped with a 3-pin grounding type
plug to satisfy FCC regulations. If you are unable to
insert the plug into the outlet, contact your electrician.
FCC information (USA only)
CAUTION: Unapproved changes or modifications
could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense. Unapproved changes
or modification could
Machine noise information (Germany
only)
Changes Machine Noise Information Ordinance 3.
GSGV, January 18, 1991: The sound pressure level
at the operator position is equal or less than 70 dB (A)
according to ISO 7779.
About the installation location
Do not install the projector in a place that cannot
support its weight securely.
If the mounting is not sturdy enough, the projector
could fall or overturn, possibly causing personal injury.
Important safeguards
Electrical energy can perform many useful functions.
This unit has been engineered and manufactured to
assure your personal safety. But IMPROPER USE CAN
RESULT IN POTENTIAL ELECTRICAL SHOCK OR
FIRE HAZARD. In order not to defeat the safeguards
incorporated into this product, observe the following
basic rules for its installation, use and service. Please
read these Important Safeguards carefully before use.
All the safety and operating instructions should be
read before the product is operated.
The safety and operating instructions should be
retained for future reference.
All warnings on the product and in the operating
instructions should be adhered to.
All operating instructions should be followed.
Place the projector near a wall outlet where the plug
can be easily unplugged.
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
Do not use attachments not recommended by the
product manufacturer as they may be hazardous.
Do not use this product near water. Do not use
immediately after moving from a low temperature to
high temperature, as this causes condensation, which
may result in fire, electric shock, or other hazards.
Do not place this product on an unstable cart, stand,
or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the
product. The product should be mounted according
to the manufacturer’s instructions, and should use a
mount recommended by the manufacturer.
•
•
•
•
•
•
•
•
•
iii
Preface
When the product is used on a
cart, care should be taken to avoid
quick stops, excessive force, and
uneven surfaces which may cause
the product and cart to overturn,
damaging equipment or causing
possible injury to the operator.
Slots and openings in the cabinet
are provided for ventilation. These ensure reliable
operation of the product and protect it from
overheating. These openings must not be blocked
or covered. (The openings should never be blocked
by placing the product on bed, sofa, rug, or
similar surface. It should not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s
instructions have been adhered to.) For proper
ventilation, separate the product from other
equipment, which may prevent proper ventilation (see
Positioning
, page 13).
This product should be operated only with the type
of power source indicated on the label. If you are
not sure of the type of power supply to your home,
consult your product retailer or local power company.
This product is equipped with a three-wire plug. This
plug will fit only into a grounded power outlet. If you
are unable to insert the plug into the outlet, contact
your electrician to install the proper outlet. Do not
defeat the safety purpose of the grounded plug.
Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed
upon or against them. Pay particular attention to
cords at doors, plugs, sockets, and the point where
they exit from the product.
For added protection of this product during a
lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the
wall socket and disconnect the cable system. This
will prevent damage to the product due to lightning
and power line surges.
Do not overload wall sockets, extension cords, or
•
•
•
•
•
•
•
convenience receptacles on other equipment as this
can result in a risk of fire or electric shock.
Never push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on
the product.
Do not attempt to service this product yourself as
opening or removing covers may expose you to
dangerous voltages and other hazards. Refer all
service to qualified service personnel.
Unplug this product from the wall outlet and refer
service to qualified service personnel under the
following conditions:
a) When the power supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen on
the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by
following the operating instructions. Adjust only those
controls that are covered by the Operation Manual,
as an improper adjustment of controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.
e) If the product has been dropped or damaged in
any way.
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
When replacement parts are required, be sure
the service technician has used replacement parts
specified by the manufacturer or with the same
characteristics as the original part. Unauthorised
substitutions may result in fire, electric shock, or
other hazards.
Upon completion of any service or repairs to this
product, ask the service technician to perform safety
checks to determine that the product is in proper
operating condition.
The product should be placed more than 300mm
away from heat sources such as radiators, heat
•
•
•
•
•
•


Product specificaties

Merk: Meridian
Categorie: Videocassetterecorder
Model: 810

Heb je hulp nodig?

Als je hulp nodig hebt met Meridian 810 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden