Meliconi Pratico 2.1 Handleiding

Meliconi Afstandsbediening Pratico 2.1

Lees hieronder de 📖 handleiding in het Nederlandse voor Meliconi Pratico 2.1 (6 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Pratico 2.1

Thank you for choosing a Meliconi remote control.

The Pratico 2.1 remote control is designed to command and a DECODER (satellite or digital terrestriala TV ).

IMPORTANT! When the remote control is set to control only device (example: TV), all the buttons will control that one

device; whilst when it is set to control 2 devices (TV + DECODER), e buttons will control the TV, only th V+ V-

whilst the other buttons will control the DECODER. (see chapter COMBINED KEYPAD)

Its ergonomic shape and soft rubber body make it easy to grip and protect it from shocks and drops.

By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.

It is also designed to be connected to the PC / TABLET / SMARTPHONE via MELICONI audiocable (included in the

package) in order to download the latest information to its activation.

The MELICONI remote control reproduces infrared signals corresponding to the original; the functions that operate in radio

frequency (e.g. voice commands and pointers) are not supported.

The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.

The remote control requires 2 new 1.5V alkaline batteries, not included in the AAA/LR03

package. Insert with the correct polarity as shown in gure.

DO NOT use batteries. rechargeable

BATTERIES TEST: Press and hold the 5 button and check that the LED remains on

continuously until the button is released. If the light is o or blinks, the inserted batteries are low,

therefore they need replacement.

WARNING:

As the remote control is capable of controlling 2 devices, during setup you must select the operation mode then dene which ;

device you want to control. (TV / STB)

To select the operation mode, press the button quickly and repeatedly until the LED corresponding to

the device you want to operate is switched on. ( led / led) TV = red STB = green

Before using the remote control, for each device you wish to control, it is to set a it matched. essential specic code,

Identify the specic code and set it into the remote control using one of the following ways:

MANUAL

SMARTPHONE

TABLET - WEB

ACTIVATION OF REMOTE CONTROL

SELECTION OF OPERATING MODE

Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control

INSERTING THE BATTERIES

SAFETY WARNINGS

The remote control and batteries should not be exposed to excessive heat such as sunlight, re

or the like.

The product . Keep out of reach of children or domestic animals. is not a toy

Keep this booklet for future reference

Use the -code on the side or connect to the page and follow the instructions. qr www.cme.it

Once you have found the specic code for your device, set it in the remote control as described in the

ENTERING THE CODE DIRECTLY chapter.

ATTENTION : searching for the suitable code could last up to 5 minutes.

• Stand in front of the device to be controlled and make sure it is ON (not in stand-by). If necessary, switch

it on using the original remote control (if this is still working) or the buttons present on the device itself. (on

TVs they can be on the side or the top)

• On the MELICONI remote control and then press and hold the butt until select the operating mode on

the LED of the remote control lights up; lease. re

• Pointing the remote control towards the device, PRESS AND HOLD butt and wait the ON/OFF on

(even up to 5 minutes) for the device to switch o.

• , w the device turn o IMMEDIATELY RELEASE the button. PAY ATTENTION hen ,

• Three nal ashes indicate that the operation has been completed successfully.

(only to be performed if you know the to be set) specic code

• On the MELICONI remote control and then press and hold the button until select the operating mode

the LED lights up; release.

• Immediately enter the previously identied specic code.

• Three nal ashes indicate that the operation has been completed successfully.

If necessary it is possible to reset the remote control and bring it back to the initial conditions. completely

WARNING : All user settings will be lost. Operate as follows:

• On the MELICONI remote control press and hold the button until the LED lights up; release.

• Enter the code . 0100

• Three nal ashes indicate that the operation has been completed successfully.

RESET THE REMOTE CONTROL

If the remote control does NOT carry out the three nal ashes, the setting is NOT successful; repeat the procedure.

If still unsuccessful, it means that the code is not included in the remote control, contact the ASSISTANCE.

ENTERING THE CODE DIRECTLY

VERIFY

Check that the MELICONI remote control operates your device the main functions if it does not, the in ; REPEAT

procedure.

NOTE: When the list of codes to be searched is over, the remote control exits the search and the LED remains o.

If no results are obtained, try using the procedure described in the SMARTPHONE - TABLET - WEB chapter or contact

the ASSISTANCE.

MANUAL SEARCH

SMARTPHONE - TABLET - WEB

watch

the video

watch

the video

The Pratico 2.1 remote control is equipped with Learn technology that can acquire and memorise signals from other infrared

remote controls. This feature is particularly useful in several cases.

 To add or change a function connected to a button on the MELICONI remote control.

Having activated the remote control and checked it is working correctly, you may need to add or replace a function on one

of the MELICONI remote control buttons with another function you consider to be handier or more frequently used.

 Assign some functions to some buttons to control other devices (example: volume +/- SOUNDBAR).

 To acquire the keypad of an original remote control when a suitable activation code cannot be found.

If no code on the MELICONI remote control is able to command the required appliance properly, you can capture and

assign to the various buttons the desired functions of the original remote control.

The Pratico 2.1 remote control can learn up to a maximum of signals coming from various original remote controls and 31

connect at will to the desired buttons (even if they have a dierent use to the one selected).

Signals can also be learnt and set on all the buttons on the MELICONI remote control, except e button. Obviously the th

preset functions are lost, but they can be restored by setting again the activation code.

The Learn operation can be repeated numerous times, and the signals captured are kept in the memory even if the batteries

are removed or go at.

● POSITIONING THE REMOTE CONTROLS CORRECTLY.

• Check that the batteries in both remote controls (the original and the MELICONI remote) are fully

charged; if semi-charged batteries are used the signal acquisition procedure may prove diicult

or fail completely.

• Position the original remote control in front of the MELICONI remote control so the areas which

emit the infrared signals are opposite each other at a distance of approximately 2 cm.

• On the MELICONI remote control , wait a few seconds and then press select the operating mode

for a moment the button.

• Within 30 seconds, press and hold down one of the buttons on the original remote control; the

LED on the MELICONI remote control should start ashing; if it doesn't, move the remote

controls closer together.

• Gradually move the original remote control away, making sure the two remotes stay aligned,

until the point at which the LED stops ashing; then move the remote control to half the previous

distance and keep both remotes in this position until the process has terminated.

● CAPTURING SIGNALS.

• On the MELICONI remote control press and hold the button until the LED lights up; release.

• Press the button again briey and immediately press for a moment the button to which to combine the capture signal.

• Press the button on the original remote to be captured, hold it down until the LED goes out and then release it.

IMPORTANT If after releasing the button the LED comes back on, press the same button again until the LED goes out :

once more.

• When the signal has been captured correctly the LED will produce three nal ashes.

To capture other signals to connect to other buttons, repeat the procedure described above.

Reached the number of records available, the dedicated memory becomes full, preventing further use.

To free memory use one of the following procedures in relation to the data that you want to delete:

• DELETE FUNCTION BY SINGLE BUTTON

• ENTERING THE CODE DIRECTLY

• RESET THE REMOTE CONTROL

LEARN FUNCTION

watch

the video

Product specificaties

Merk:	Meliconi
Categorie:	Afstandsbediening
Model:	Pratico 2.1
Kleur van het product:	Black, White
Gebruikershandleiding:	Ja
Materiaal behuizing:	Rubber
Type verpakking:	Doos
Ondersteund aantal accu's/batterijen:	2
Interface:	IR Draadloos
Duurzaamheidscertificaten:	CE
Aantal per verpakking:	1 stuk(s)
Merkcompatibiliteit:	Universeel
Maximumbereik:	- m
Backlight toetsen:	Nee
Oplaadbaar:	Nee
Input type:	Drukknopen
juiste gebruik afstandsbediening:	TV, TV set-top box
Type batterij:	AAA
Number of devices supported:	2
Garantieperiode:	2 jaar