Meliconi Pratico 2 Handleiding

Meliconi Afstandsbediening Pratico 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Meliconi Pratico 2 (5 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Thank you for choosing a Meliconi remote control.

Keep this booklet for future reference.

The Pratico 2 remote control is ideal for replacing up to 2 remote controls for TV - SAT (satellite decoder) - TER

(Digital Terrestrial decoder). It can also be connected to a PC using the Meliconi audio cable (to be purchased

separately), thereby allowing the user to download the most up-to-date conﬁ guration information. The remote

control has a non-volatile memory, meaning that it does not lose its settings even if there are no batteries in it.

IMPORTANT: The remote control must not be exposed to excessive heat sources.

USE OF THE BUTTONS AND FUNCTIONS

The functions of the buttons described below are available only if they exist on your device.

ON / OFF switches the device OFF and

in some cases ON

Buttons for selecting the device to

be controlled

Numeric keypad

Selects digital TV and radio

Volume control +/–

For selecting an

external input source

Conﬁ rm selection

For selecting the next programme

P+ or the previous programme P–

Fastext functions or for selecting sub-menus

using colours

TELETEXT buttons

Speciﬁ c buttons for decoder

For moving around within the MENU

MUTE turns sound OFF and ON

Selects

analogue/digital

Displays the list of programmes

The Pratico 2 remote control is a universal remote with a memory containing data regarding numerous devices

produced by different brands on the market.

Each original device has a speciﬁ c code which must be used to set up the remote control.

So to use the Pratico 2 you must enter the speciﬁ c code for each device you wish to control.

So use one of the following methods to identify the correct code and set it in your remote control:

A) - INTERNET (recommended)

B) - CELL PHONE (SMS)

C) - MANUAL SEARCH

SETTING CODES

If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website

to identify the speciﬁ c codes for the devices you wish to command. Then set the codes manually in your

MELICONI remote control as described in the ENTERING THE CODE DIRECTLY procedure.

SETTING CODES USING INTERNET

Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their

remote control directly on their cell phone.

Simply send an SMS to this number 0039 345 7518893 as follows: 2B, Type, Brand, Model

- Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - TER

(terrestrial decoder)

- Brand, Model = to indicate the brand and the model of the device to be controlled.

Example: 2B, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).

Once you have received the SMS with the list of codes, set the ﬁ rst code in the remote control as described in

the ENTERING THE CODE DIRECTLY section.

Point the MELICONI remote control at the device, which should already be ON and press the ON/OFF button.

If the device does NOT switch off, try setting the consecutive code in the SMS list on the remote control.

SETTING CODES USING A CELL PHONE

(the service s fee and the only cost is that of sending the SMS,

which naturally depends on the rates of the service operator in question)

Before using the remote control, insert the batteries and programme it.

INSERTING THE BATTERIES

The remote control requires 2 new 1.5V alkaline AA/LR06 batteries. Insert

them as illustrated.

Try pressing a number button and check that the red light remains lit

continuously until you release the button. If the light ﬂ ashes, the batteries

inserted are not charged and are about to go ﬂ at, therefore you must

substitute them.

Do not leave ﬂ at batteries inserted,

as liquid may leak and damage the remote control

NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE,

it means the system has not been able to process the data you have sent. Do not try sending

another SMS use the SETTING CODES USING A MANUAL SEARCH procedure instead.

When the device reacts check whether the other buttons are operating correctly too.

If they do, the remote control is ready to use.

If they don’t, you are probably using an incorrect code destined for a very similar device; at this point

ignore the SMS list and consult the SETTING CODES USING A MANUAL CODE section to ﬁ nd a more suitable

code.

CHECK

Check that the other buttons correspond to the functions of the original remote control; if not, it is likely

that the code found is incorrect, but is used for a very similar device. In that case, repeat the procedure

from point 2.

If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN

USE procedure and make a note of it inside the battery cover.

NOTE: During the search the indicator stops ﬂ ashing and the remote control exits the programming mode

in the following cases:

• if for 12 seconds the button indicated is not pressed or if another button is pressed

• if the list of codes to ﬁ nd is terminated. If this happens, go to the www.meliconi.com website

SETTING CODES USING A MANUAL SEARCH

(only to be performed if the speciﬁ c code could not be found)

1. Switch on the device and select a programme.

2. Press and hold down for 6 seconds the device selection

button corresponding to the device you wish to enter the

code for.

3. Release the button. The indicator light will ﬂ ash. Point

the remote control at the device and press the ON/OFF

button. If the device does NOT switch off, press the

same button again slowly (it may be necessary to press

the button several times).

4. When the device responds correctly, press OK. Three

long ﬂ ashes indicate that the operation has been carried

out correctly.

6 SEC.

Product specificaties

Merk:	Meliconi
Categorie:	Afstandsbediening
Model:	Pratico 2

Heb je hulp nodig?

Als je hulp nodig hebt met Meliconi Pratico 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Afstandsbediening Meliconi

Meliconi Personal 2 plus Handleiding

5 Januari 2024

Meliconi Speedy 2.1 Handleiding

8 Juli 2023

Meliconi GumBody Light Handleiding

7 Juli 2023

Meliconi Pratico 2.1 Handleiding

6 Juli 2023

Meliconi Gumbody Personal 7 plus Handleiding

5 Juli 2023

Meliconi Gumbody Personal 2 Handleiding

5 Juli 2023

Meliconi Control TV+ Handleiding

4 Juli 2023

Meliconi Gumbody Personal 6 plus Handleiding

3 Juli 2023

Meliconi Digital 2 smart Handleiding

2 Juli 2023

Meliconi PERSONAL 3 Handleiding

26 Juni 2023

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening

Nanlite BT-BCS-48V3.5mm Handleiding

21 December 2024

One For All Essence 4 KE1242 Handleiding

13 December 2024

Genaray RSF-11-R Handleiding

12 December 2024

Genaray ML-LSR Handleiding

12 December 2024

Genaray MonoBright MB-WRT Handleiding

12 December 2024

Futaba SBS-01V Handleiding

10 December 2024

Futaba T3PV Handleiding

10 December 2024

Futaba DLPH-1 Handleiding

10 December 2024

Audio-Technica AT-SL931HD Handleiding

6 December 2024

Velleman DVRRC4 Handleiding

3 December 2024