Meliconi gumbody light facile Handleiding

Meliconi Afstandsbediening gumbody light facile

Lees hieronder de 📖 handleiding in het Nederlandse voor Meliconi gumbody light facile (6 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

USING T HE KEYS AND FUNCT ION S

The functions described below are only available if

they are already foreseen by your TV.

SET- UP

Read these instructions carefully before

programming your remote control!

The F A C I L E L i g h t replacement remote control was designed as a TV control. Thanks to its large

database and numerous functions it is ideal for replacing any lost, defective or broken remote control.

Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.

The large pushbuttons are easy to see and to use. And thanks to the LIGHT button the keys light up so

you can use the remote control even in the dark.

Thank you for choosing a MELICONI remote control.

F A C I L E L i g h t

Keep your Instruction Booklet and Code Booklet for future reference. For anyone with internet,

via the website www.gumbodylight.com, it is even easier and quicker to programme the remote

control and discover all the potential of the FACILE Light thanks to the on-line guide.

Light indicator

TV buttonON/OFF

Teletext keys

Number keys

Confirm button

To select an external input terminal

Control the volume using +/–

To select the next ( ) orP+

previous (P-) channel or programme

MUTE key

turns the volume on and off

Fastext functions

or to select submenus

by means of the colours

To move around within the MENU

or to control BRIGHTNESS/COLOUR

Key with additional TV functions To access the MENU

LIGHT button

to light up the keysImpact-proof rubber casing

To programme the

remote control,F A C I L E L i g h t

follow the indications in paragraph

1. Switch on the TV.

2. Look for the brand of your TV in the code book and make

a note of the code indicated alongside (

e.g. PHILIPS 0025

)

or the code for the brand indicated by the arrow.

3. Hold down the MUTE ON/OFF and buttons together for

5 seconds until the light indicator at the top starts to flash

indicating that the remote control is being programmed.

4. Release the buttons and enter the brand code previously

identified (

e.g. 0025

) within 12 seconds. The light indicator

flashes more quickly to indicate that the remote control

is ready for the search.

5. Point the remote control at the TV. Press and slowly release

the ON/OFF key several times, stopping when the TV

goes off.

6. When the TV goes off, press the key to confirm. OK Three

flashes indicate that the operation has been completed

correctly.

The quickest and easiest way to programme the remote control

is by consulting the website www.gumbodylight.com.

BRAND SEARCH PROGRAMMING MODE

PHILIPS 0025

PHONOLA

PHILIPS

+ + +

FI TT ING T HE B AT T ERIES

Before programming and using

the remote control, fit the batteries.

The remote control requires 2 new

AA/LR06

batteries. Insert the batteries as shown:

• Remember to replace the batteries once a year.

• If the light indicator starts to flash while using the remote

control, replace the batteries. The batteries are low.

• When you remove the batteries, fit the new ones within

5 minutes or you may have to reprogramme your remote

control.

• Make a note of the code for your TV on the adhesive label

inside the battery cover in case you have to reprogramme

your remote control.

+5 SEC.

ADDITIONAL CHECK

Check that some of the other keys, corresponding to those on your original remote control, work correctly.

If the commands function incorrectly or erratically, you have probably entered a code for a similar remote

control but not the right one. In this case, repeat the search procedure starting from

point 3

, entering the

code previously used (e.g. 0025).

To display and make a note of the code memorized by means of the search,

follow the instructions described in the paragraph CURRENT CODE DISPLAY.

ADDITIONAL CHECK

Point the remote control at the TV. Check that the TV responds correctly to the commands given. If there

is no response or the TV only responds partially or incorrectly, it is probable that you have used the wrong

code. In this case, repeat the procedure starting from point 3. This time, however, use the

NEXT CODE

in the list (e.g. 1006).

The quickest and easiest way to programme the remote control

is by consulting the website www.gumbodylight.com.

DI RE C T C O D E E N T RY

. Switch on the TV.

. Look for the brand of your TV in the code book and

make a note of the

first code

in the list (e.g. Philips

1000).

. Hold down the

MUTE

and

ON/OFF

buttons together for

5 seconds until the light indicator at the top starts to

flash indicating that the remote control is being

programmed.

. Release the buttons and enter the 4-digit brand code

previously identified (e.g. 1000) within 12 seconds.

Three flashes

indicate that the code has been

memorized correctly. If not, try the code entry procedure

again, starting from

point 3

PHILIPS 0025

TV 1000 1006 1007 1008

1009 1010 1011 1012 1013

1014 1015 1016 1017 1018

Remember to make a note of the TV code used to programme

the remote control on the adhesive label inside the battery cover

for quick and easy reprogramming.

N.B. THE LIGHT INDICATOR STOPS FLASHING

The remote control exits programming mode and the light indicator stops flashing:

•

if no keys are pressed for 14 seconds

•

if an invalid code is entered

N.B. THE LIGHT INDICATOR STOPS FLASHING

The remote control exits programming mode and the light indicator stops flashing:

• if no keys are pressed for 14 seconds

•

if an invalid brand code is entered

•

if the end of the code search list has been reached. In this case, switch to programming mode C.

+ + +

1 00 0

+5 SEC.

Product specificaties

Merk:	Meliconi
Categorie:	Afstandsbediening
Model:	gumbody light facile
Kleur van het product:	Zilver
Ingebouwd display:	Nee
Interface:	IR Draadloos
Batterij bijna leeg-indicatie:	Ja
Backlight toetsen:	Ja
Input type:	Drukknopen
juiste gebruik afstandsbediening:	TV
Number of devices supported:	1