Meliconi Gumbody FACILE 100 Handleiding

Meliconi Afstandsbediening Gumbody FACILE 100

Lees hieronder de 📖 handleiding in het Nederlandse voor Meliconi Gumbody FACILE 100 (5 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

USING THE KEYS AND FUNCTIONS

The functions described below are only available

if they are already foreseen by your TV.

PREPARE FOR USE

Read these instructions carefully

before programming your remote control!

The FACILE 100 replacement remote control was designed as a TV control. Thanks to its large database

and numerous functions it is ideal for replacing any lost, defective or broken remote control.

Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.

The large keys are easy to see and to use.

Thank you for choosing a MELICONI remote control.

FACILE 100

Keep this booklet in case you ever need to consult us in the future.

For anyone with internet, via the website www.meliconi.com/guide,

it is even easier and quicker to programme the remote control

and discover all the potential of the FACILE 100 thanks to the on-line guide.

Light indicator TV ON/OFF key

Teletext keys

Number keys

Confirm key

To select an external input terminal

Control the volume using +/–

To select the next (P+) or

previous (P-) channel or programme

MUTE

turns the volume on and off

Fastext functions or to select

submenus by means of the colours

To move around within

the MENU or to control

the BRIGHTNESS/COLOUR

Key with additional TV functions

To access the MENU

Impact-proof rubber casing

1. Switch on the TV.

2. Look for the brand of your TV in the Code Book and make

a note of the corresponding code indicated alongside (

e.g.

Philips 0025

3. Hold down the MUTE and ON/OFF keys together for 5

seconds until the light indicator starts to flash indicating

that the remote control is being programmed.

4. Release the keys and within 12 seconds enter the make

code previously identified (

e.g. 0025

). The light indicator

flashes more quickly to indicate that the remote control

is ready for the search.

5. Point the remote control at the TV. Press and slowly release

the ON/OFF key several times, stopping when the TV

goes off.

When the TV goes off, press the OK key to confirm

Three flashes indicate that the operation has been

completed correctly.

The quickest and easiest way to programme the remote control is

by consulting the website www.meliconi.com/guide.

HOW TO PROGRAMME THE REMOTE CONTROL

PHILIPS 0025

FITTING THE BATTERIES

Before programming and using the remote control,

fit the batteries.

The remote control requires 2 new AAA/LR03 batteries. Insert the batteries as shown:

• Change the batteries if the light indicator starts to flash

during use. The batteries are low.

• When you remove the batteries, fit the new ones within

5 minutes or you may have to reprogramme your remote

control.

• Make a note of the code for your TV on the adhesive label

inside the battery cover in case you have to reprogramme

your remote control.

To display and make a note of the code memorized by means of the search,

follow the instructions described in the paragraph CURRENT CODE DISPLAY.

ADDITIONAL CHECK

Check that some of the other functions used on your original remote control are working correctly. If the

commands function incorrectly or erratically, you have probably entered a code for a similar remote control

but not the right one. In this case, repeat the search procedure starting from point 3, entering the code

previously used (e.g. 0025).

+5 SEC.

+++

N.B. THE LIGHT INDICATOR STOPS FLASHING.

The remote control exits programming mode and the light indicator stops flashing:

• if no keys are pressed for 14 seconds

• if an invalid brand code is entered

• if the end of the code search list has been reached. In this case, consult our website www.meliconi.com/guide

GLOBAL SEARCH REMOTE CONTROL PROGRAMMING

This operation can take up to 20 minutes and should be carried out if you have not succeeded in programming

the remote control by means of the method described above.