MEE Audio Matrix 3 AF68 Handleiding

MEE Audio Headset Matrix 3 AF68

Lees hieronder de 📖 handleiding in het Nederlandse voor MEE Audio Matrix 3 AF68 (2 pagina's) in de categorie Headset. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

ENGLISH

PACKAGE CONTENTS

CONTROLS

The headphone controls on the Matrix3 are located on the right

earcup.

Volume Up / Skip Track button ( )

[TAP] - Increase volume

[HOLD 3 sec] - Next track

Volume Down / Previous Track button ( )

[TAP] - Decrease volume

[HOLD 3 sec] - Previous track

Multifunction button ( )

[HOLD 4 sec] - Power On/Off

[TAP] - Play/pause (during media playback*)

[TAP] - Answer Incoming Call

[HOLD 2 sec] - Reject Incoming Call

[TAP] - Hang up (during phone call)

[HOLD 1 sec] - Siri/voice command/voice dialing**

[TAP twice] - Redial**

- Mute call (during phone call)

* To start playing music, open a music app on your device and start playback.

** Not all devices support this functionality. For more information, refer to the user

manual for your device.

CHARGING

Connect micro-USB cable to Matrix3 charging

port and powered-on computer or USB charger.

USB Port

PORT

USB

Charge time is ~2 hours. The red charging indicator light will turn off

once fully charged.

Low battery is indicated by a flashing red status indicator light and

“Battery Low” voice notification every 60 seconds.

Apple® devices such as the iPhone®, iPad®, and iPod touch® will

also display an on-screen headset battery indicator near the top

right corner of the screen when the Matrix3 is connected.

battery indicator

Matrix3 AF68

Stereo Bluetooth Headphones

Premium protective

carrying case

Micro-USB

charging cable

Stereo

audio cable

User manual

BLUETOOTH PAIRING

Make sure the Matrix3 is turned off and within 3 feet (1 meter)

of your device. Put the headset in pairing mode by holding the

Multifunction

button for about 6 seconds until the status indicator

light begins to flash red and blue in an alternating pattern and the

headphone says “Ready to Pair”.

Phones and tablets

Open the Settings menu

and select "Bluetooth". If

Bluetooth is not on, turn it on.

Select “Search for Devices”

or “Refresh” if your phone or

tablet does not automatically

search for new devices.

Se t tings

Bluetoot h

Bluetooth

MEE audio Mat rix3 Connected i

Now d isc overab le as “ You r iPh one” .

MY DE VI CES

Other devices

Visit for pairing & setup www.MEEaudio.com/Bluetooth

information.

Wait until you see “MEE audio Matrix3” on the screen of your

device. Select it and follow any further prompts to pair. Use “0000”

if a pin is required. Once connected, the status indicator light will

turn blue.

Note: It is only necessary to pair your headset once with each

device.

If pairing fails, please refer to your device’s user manual for

further information. Visit the Bluetooth Support Page at

www.MEEaudio.com/Bluetooth for instructional pairing videos

and troubleshooting information.

MULTIPOINT

Multipoint is an optional feature which allows two Bluetooth

devices to be connected to the Matrix3 simultaneously.

Enabling Multipoint

To turn on Multipoint, first put the Matrix3 headphones in standby

mode (standby mode is when the headphones are powered on

but not connected to any device). To enter standby mode, turn

off the Bluetooth functions on all nearby devices that have

been previously paired with the Matrix3 and then power on the

headphones. In standby mode, the blue status indicator light will

blink slowly.

Once in standby mode, press and hold the

Volume Up

and

Volume Down

buttons for approximately two seconds or until

you hear an ascending tone indicating that Multipoint has been

turned on.

To turn Multipoint off again, enter standby mode and hold the

Volume Up

and

Volume Down

buttons for approximately

5 seconds or until you hear a descending tone indicating that

Multipoint has been turned off.

[HOLD 2 sec] Turn OnMultipoint

[HOLD 5 sec] Turn OffMultipoint

DISABLING AUDIO PROMPTS

Voice prompts and other audible notifications of the Matrix3

can be disabled. To turn off all audio prompts, put the Matrix3 in

standby mode (see the section) and then Enabling Multipoint

press and hold the

Volume Down

button for 4 seconds, until you

hear two descending tones.

To turn audio prompts back on, repeat the above procedure using

the

Volume Up

button and listen for two ascending tones.

Note: this will turn off all sound alerts and other audio notifications.

[HOLD 4 sec] Turn OffAudio Prompts

[HOLD 4 sec] Turn OnAudio Prompts

SAFETY AND CARE

• Clean with a soft cloth, damp with diluted soap water solution

if necessary. Do not use chemical cleaners.

• When not in use, power the headphones off and store in the

included protective carrying case.

• Battery performance will be severely decreased when

stored in extreme temperatures: below -10°C/14°F or above

45°C/113°F including direct sunlight.

• The lifetime of the battery will be significantly reduced if your

headset is not charged for a long time. It is recommended to

charge your headset at least once a month.

• There are no user replaceable/reparable parts in the headset.

Disassembling it will void your warranty.

• If the device comes in contact with liquids, quickly wipe

away. If submersed in water, do not turn the device on until

completely dried. Note: liquid submersion voids the warranty.

• Do not use around flammable gasses as fire or explosion

may occur.

RECONNECTING TO PAIRED DEVICES

The Matrix3 can remember previously paired devices. Any time

it is turned on, it will automatically connect with the last paired

Bluetooth device that is on and within range. If the headset does not

connect automatically once turned on, open the Bluetooth menu

on your device and select “MEE audio Matrix3” from the Bluetooth

device list.

MULTIPOINT CONT.

Multipoint Pairing

To use two Bluetooth devices with the Matrix3, first pair each one

by following the pairing procedure described in the Bluetooth

Pairing section and then power the headset off. When powered

on again, the headset will connect to the 2 most recently-paired

devices, as long as they have Bluetooth enabled and are within

range. If a device that has already been paired does not connect

automatically, select “MEE audio Matrix3” from the Bluetooth

menu of the device.

Multipoint Functionality

To switch between the two connected devices, pause audio

playback on the active device and start audio playback on the

other connected device. It may take up to 30 seconds for the

audio to switch.

Incoming calls will always take precedence over media.

The Matrix3 will automatically activate the connected device

that has an incoming call.

Disabling Multipoint

If you no longer wish to connect to multiple devices, disable

Multipoint by following the instructions in the Enabling Multipoint

section above, disable Bluetooth on the device you do not want

connected to the Matrix3, or remove the “MEE audio Matrix3” entry

from the Bluetooth menu of the device.

USE AS WIRED HEADPHONE

The Matrix3 can be used as a wired headphone with the

included 3.5mm stereo audio cable. This allows use when the

battery is depleted and with devices that do not have Bluetooth

(such in-flight entertainment systems) or aren’t paired.

The wired connection can also be used while the Matrix3 is

connected to another device wirelessly via Bluetooth. Bluetooth

audio takes precedence over wired audio. Wired audio will be

partially muted whenever a signal is transmitted via Bluetooth

and will resume approximately 5 seconds after the Bluetooth

transmission ends.

Note: the built-in microphone of the Matrix3 will not work when the

headphones are used only in wired mode.

3.5mm

WARNING

Using headphones at high volumes for extended periods of time

will result in permanent hearing damage. It is advised you keep

volume levels moderate to low at all times for your safety. Turn

the volume all the way down after connecting your earphones,

then gradually increase the volume until you reach a comfortable

listening level. Do not use while driving a car, cycling, operating

machinery, or performing other activities that require hearing

surrounding sounds.

TROUBLESHOOTING

Visit the Bluetooth Support Page at

www.MEEaudio.com/Bluetooth for troubleshooting procedures.

SPECIFICATIONS

Visit for product specifications.www.MEEaudio.com/Matrix3

WARRANTY

The Matrix3 is covered by a 1-year manufacturer warranty.

For more information, contact your local MEE audio dealer

or visit www.MEEaudio.com/Support

PRODUCT OVERVIEW

Left Earcup

A. 3.5mm audio jack

B. Charging Indicator light

C. Micro-USB charging port

Right Earcup

D. Volume Up /

Skip Track button ( )

E. Volume Down /

Previous Track button ( )

F. Status Indicator light

G. Multifunction button ( )

H. Microphone

A. B. C. D. E. F. G. H.

Model: AF68

user manual

English

Bluetoo th Wirele ss HD He adph one s

Pow ered b y qu alco mm a ptX an d B luetoo t h

Bluetoot h suppor t page

Please vi sit the page at Bluetooth Support Guide

www.MEEaudio.com/Bluetooth for easy-to-follo w

video set up guides , the f ull us er manual, and the lates t

troubleshooting i nformation.

HOLD

BOTH

1 sec

USER MANUAL

English

Bluetooth Wireless HD Headphones

Model: AF68

BLUETOOTH SUPPORT PAGE

Please visit the Bluetooth Support Guide

at for www.MEEaudio.com/Bluetooth

easy-to-follow video setup guides and

the latest troubleshooting information.

P O W E R E D B Y Q u a l c o m m a p t X ® A N D B l u e t o o t h ®

www.MEEaudio.com

support@MEEaudio.com

Have a question?

Email support@MEEaudio.com

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by

MEE audio is under license. Other trademarks and trade names are those of their respective owners.

Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm

Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm

Technologies International, Ltd., registered in the United States and other countries, used with permission.

iPhone®, iPad®, and iPod® are registered trademarks of Apple Inc.

Product specificaties

Merk:	MEE Audio
Categorie:	Headset
Model:	Matrix 3 AF68

Heb je hulp nodig?

Als je hulp nodig hebt met MEE Audio Matrix 3 AF68 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Headset MEE Audio

MEE Audio BTN2 Handleiding

17 Augustus 2024

MEE Audio Matrix 3 AF68 Handleiding

20 Juni 2023

MEE Audio Atlas Handleiding

7 Juni 2023

MEE Audio X10 Handleiding

2 Maart 2023

Handleiding Headset

Nieuwste handleidingen voor Headset

ModeCom MC-219U Handleiding

17 November 2024

HyperX Cloud Stinger S Handleiding

16 November 2024

Vorago ESB-600 Plus Handleiding

16 November 2024

ASTRO Gaming A10 Handleiding

16 November 2024

Denon Urban Raver AH-D320 Handleiding

16 November 2024

Sennheiser PC 8.2 USB Handleiding

15 November 2024

Bang Olufsen H7 Handleiding

15 November 2024

Lenovo Y Gaming Stereo Headset Handleiding

15 November 2024

Pioneer HDJ-CX Handleiding

15 November 2024

Anker SoundBuds Flow Handleiding

15 November 2024