Mean Well LCM-60 Handleiding

Mean Well Niet gecategoriseerd LCM-60

Lees hieronder de 📖 handleiding in het Nederlandse voor Mean Well LCM-60 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Features

Wiring

Environmental limitations

Cautions

Settings and connections

1. Output Current Level Settings

‧

180~295VAC input only

Built-in active PFC

Output curr ent lev el selectable by DIP switch

Built-in DALI interface and pus h dimming function (DA version)

Buil t-in 0~10Vdc and PWM sig nal dimmi ng function (Non -DA version)

Power supp ly syn chroni zation function up to 1 0 un its

Temperature compensation function by external NTC

‧

Clas s po wer un it, ung rounded

Buil t-in 12V/50mA auxiliary ou tput

Full plastic case enclos ed

No l oad power consumption <1W (1.2W for DA ve rsion)

Protection s: Short circuit / Over voltage / Over temperature

3 year war ranty

Suit able fo r intell igent LED lighting

Ⅱ

‧

Hous ing with cabl e clamp for re mote installation

Use wires with an adequate cross-section (see 5)

Use suitable mounting tools to do the wiring and mounting (see 5)

MCB circuit breaker) with an adequate current rating to protect the lighting system (see 6)Use a (miniature

‧

Maxi mum ambient temperature must not exceed 60

Always allow adequate ventilation clearances, 50mm, aro und the unit in use to prevent it from overheating

Only install the unit in interior environments

℃

‧

This unit must be installe d by a qualified electrician

This unit is not suitable for applications that DC/DC converters are connected befor e LED lamps

The LCM can prov ide various output currents by se tting the DIP switch. The settings of the DIP switch are shown in the tables below.

LCM-40(DA ) LCM-60(DA)

Note : 1.Fac tory default setting is 70 0mA.

2.Out put vo ltage a nd o utput wa ttage mus t n ot exc eed th e ra te d val ues.

Voltage

ran ge

Voltage

ran ge

1 12 23 34 45 56 6

Sel ectable

Current

Sel ectable

Current

2-100V 2-90V- -- ------ ---- -- - ----- ---- -- - ----- ---

--- ---- -- - ----- ---- -- - ----- ---

- -- - ----- ---

--- ---

- -- - --

--- ---

ON ON

ON ONON ON

ON ONON ONON ONON ON

ON ONON ONON ONON ONON ON

ON ONON ONON ONON ONON ONON ON

350mA 50 0mA

2-8 0V 2-9 0V50 0mA 60 0mA

2-6 7V 2-8 6V60 0mA 70 0m A*

2-5 7V 2-6 7V70 0m A* 90 0mA

2-4 5V 2-5 7V90 0mA 10 50mA

2-4 0V 2-4 2V10 50mA 14 00mA

LCM-40(DA), LCM-60(DA) installation manual

6 5 4 3 2 1

-Vo

+Vo

SYN.

-NT C

+DI M

-DIM

+NT C

-FAN

+FAN

DA-

DA+

PUSH

AC /N

AC /L

Terminal blocks assignment for LCM

2. Connection of LED Lamps

Press down the "push button" by a slotted screw driver to insert or remove the cable.

Vo-

Vo+

AC/N

AC/L

NEU TRAL (Blue o r whit e)

LIVE (Brow n or black )

http: //www.meanwell.c om



  



123.5mm 23mm

3. Connection of Dimming Functions

4. NTC Connection

5. Recommended Scre wdriver, Wire and Torque Setting

6. Suggested Maximum Number of the LCM Units that can be Connected to a MCB (miniature circuit breaker ) at 230Vac

a. 0-10Vdc or 10V PWM (non-DA version only)

c. Push dim (DA version only)

d. Synchronization ope ration

The lights LCM units (slaves) can be dimmed synchronously through a LCM unit (the master) directly controlled viadriven by

0-10Vdc, 10V PWM, DALI or push dim dimming function. The wiring is show n as below.

No te: ON LY use open push button witho ut indi cator l ight.

Warning: Risk of short circuit. The push button can on ly be linked between the PUSH and the AC/L (brown or black).

DO NOT connect the push button to the AC/N (blue or white).

b. DALI (DA version only)

Note : Maximum DALI cable length is 300m

(based on a 1.5mm or 14AWG cable)

DA+

DA- DALI

co ntro l ler

Dimming control mechanism

Function

Turn ON/OFF

Dim UP/DOWN

Reset

None

Pushing time

0.1 ~ 1 sec

1.5 ~ 10 sec

> 11 sec

< 0.05 sec

SYN.

Master Slave 1 Slave 2

‧

Mating housing for SYN. connectors : JST B2B-XH or equivalent

Maximum number of the LCM units : 10 (1 master + 9 slaves)

Maximum cable length between each units : 20m (based on a cable with cross-section of 0.15mm ~0.3mm or AWG No. of 22 ~ 26)

2 2

Note 1 : DO NOT connect dimming circuitry to slaves.

Note 2 : Pl ease make sure all units are set to 100% dimming setting (factory default) before synchronizing.

Note: These calculated v alues are based on MCB S201 series manu factured by A BB.

http: //www.meanwell.co m

Type

Model B10 B16 C10 C16

LCM-40(DA) 10 16 17 28

LCM-60(DA) 9 15 16 26

Solid wire

Stranded wire

American w ire gauge

Wire stripping length

Screwdriver

Recommended tig htening tor que

Suggested push-down strength

-----

6mm Phillips

4.6 kgf-cm (4 lb-in)

-----

The cover

(the blue one)

Push terminal

(ACL/N, PUSH, DA , Vo )± ±

ψ ψ1.024 - 1.628mm

0.823 - 2.08mm2

14 - 18AWG

10mm (0.39")

3mm Phillip s

-----

3 - 4 kp (6.61-8.81 lb )

‧

It will always dim up when light intensity is lower than 10%, whe reas it will

Factory dimming setting: 100%

always dim down when light intensity is higher than 90%

DIM-

DIM+ 0~ 10V DC

NTC-

NTC+

AC/L

AC/N

Push Butto nPUSH

LIVE (Brown or black)

NEUTRAL (Bl ue or white)

ψ ψ0.404 - 0.643 mm

0.12 9 - 0.3 26mm2

22 - 26AWG

7mm (0.27 ")

3mm Philli ps

2.88 kgf-cm (2.5 lb-in)

-----

Scr ew ter minal

(FAN , NT C , DIM )± ± ±

Product specificaties

Merk:	Mean Well
Categorie:	Niet gecategoriseerd
Model:	LCM-60
Gewicht:	240 g
Breedte:	123.5 mm
Diepte:	81.5 mm
Hoogte:	23 mm
Stroom:	0.32/230VC, 0.27/277VC A
Uitgangsvermogen:	60.3 W
Oververhittingsbeveiliging:	Ja
Frequentie:	47 - 63 Hz
Spanning:	102 V
Power factor:	0.97
AC-ingangsspanning:	180 - 295 V
Bedrijfstemperatuur (T-T):	-30 - 90 °C
Short circuit bescherming:	Ja