McIntosh MCLK12 Handleiding

McIntosh Klok MCLK12

Lees hieronder de 📖 handleiding in het Nederlandse voor McIntosh MCLK12 (16 pagina's) in de categorie Klok. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com

MCLK12

Analog Clock

Owner’s Manual

The lightning ash with arrowhead, within an equilateral

triangle, is intended to alert the user to the presence of

uninsulated “dangerous voltage” within the product’s en-

closure that may be of sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

WARNING - TO REDUCE RISK

OF FIRE OR ELECTRICAL

SHOCK, DO NOT EXPOSE

THIS EQUIPMENT TO RAIN OR

MOISTURE.

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

To prevent the risk of electric

shock, do not remove cover or

back. No user-serviceable parts

inside.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install

in accordance with the manufacturer’s instruc-

tions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other appa-

ratus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polar-

ized or grounding-type plug. A polarized plug

has two blades with one wider than the other.

A grounding type plug has two blades and a

third grounding prong. The wide blade or the

third prong are provided for your safety. If

the provided plug does not t into your outlet,

consult an electrician for replacement of the

obsolete outlet.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11. Only use attachments/accessories specied by

the manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specied by the manu-

facturer, or sold with the appa-

ratus. When a cart is used, use

caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

14. Refer all servicing to qualied service person-

nel. Servicing is required when the apparatus

has been damaged in any way, such as power-

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

15. Do not expose this equipment to dripping or

splashing and ensure that no objects lled

with liquids, such as vases, are placed on the

equipment.

16. To completely disconnect this equipment from

the a.c. mains, disconnect the power supply

cord plug from the a.c. receptacle.

17. The mains plug of the power supply cord shall

remain readily operable.

18. Do not expose batteries to excessive heat such

as sunshine, re or the like.

19. Connect mains power supply cord only to a

mains socket outlet with a protective earthing

connection.

The life of the Lithium Battery used in the McIntosh

Clock is approximately the shelf life of the battery

(10 - 15 years). However, it is advisable to remove the

battery from the MCLK12 when the clock is not con-

nected to AC Power for an extended period of time.

This will help to extend battery life and avoid possible

damage to the clock.

Perform the following steps to remove the battery

from the clock:

1. Disconnect the AC Power Cord from the Rear

panel of the McIntosh MCLK12 Clock. Refer to

figure 1.

2. Press the tab and lift up on the Backup Battery

Cover and temporarily place it aside. Refer to

figure 2.

3. Refering to figure 7,

use a small pocket

size screw driver (or

other suitable tool)

and carefully insert

the tip of the tool be-

tween the metal tab

of the battery socket

and the left side of

the battery. Then ro-

tate the tool to release the battery from the socket.

Remove the battery from inside of the clock.

5. Reinstall the Backup Battery Cover. Refer to

figure 6.

6. Store the battery in a cool dry place for

future use or dispose of the battery in

accordance with the local regulations

for lithium battery disposal. Batteries

should never be thrown away or inciner-

ated.

The McIntosh MCLK12 Analog Clock uses a long

life Lithium Coin Cell type battery. The MCLK12

will function without a battery when connected to AC

Power. However, the battery will keep the current time

in the event there is an interruption of AC Power and

thus prevents the necessity of having to reset the cor-

rect time when AC Power is restored. The MCLK12

may be supplied with a battery depending on the

country where the MCLK12 is purchased. When pur-

chasing a battery for use in the MCLK12 refer to the

following list:

Approved Lithium Batteries

Brand IEC No. ANSI/NEDA No.

Energizer CR203215004LC1

Panasonic CR2032(PA/1B)15004LC1

Access to the recessed battery compartment is located

on the Rear Panel of the MCLK12. Refer to figure 1.

Perform the following steps to install the battery:

1. Press the tab and lift up on the Backup Battery

Cover and temporarily

place it aside. Refer to

figure 2.

2. Remove the CR2032

Battery from its pack-

aging.

3. Orient the battery so

the + symbol (en-

graved into one side of the battery) is facing up.

4. Refering to figures 3, 4 and 5 insert the battery

into the socket. Make

sure the right side of the

battery is seated under

the two retaining tabs of

the socket before press-

ing down on the left side

of the battery.

5. Reinstall the Backup

Battery Cover. Refer

to figure 6.

6. The MCLK12 Analog

Clock is now ready

for installation, con-

nection and opera-

tion.

Battery Installation and Replacement

Battery Installation

BACKUP

BATTERY

Figure 2

Battery

Socket

Figure 3

CR2032

Tabs

Figure 4

CR2032

Figure 5

BACKUP

BATTERY

Figure 6

CR2032

Figure 7

Battery Removal

CAUTION:

Danger of explosion if the battery is in-

correctly installed. Only install one of the

approved Lithium Batteries listed below.

BACKUP

BATTERY

Figure 1

Battery

Compartment

CR Lithium Coin Cells contain Perchlorate Material - special handling

may apply. For additional information go to www.dtsc.ca.gov/hazaedous

waste/perchlorate/index.cfm

Product specificaties

Merk:	McIntosh
Categorie:	Klok
Model:	MCLK12
Kleur van het product:	Zwart
Gewicht:	3620 g
Breedte:	445.5 mm
Diepte:	525.4 mm
Hoogte:	225.4 mm
Soort:	Kwartswandklok
Vormfactor:	Vierkant