McIntosh MC303 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor McIntosh MC303 (20 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
MC303
Owner’s Manual
Power Amplifier
2
The lightning ash with arrowhead,
within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “danger-
ous voltage” within the product’s
enclosure that may be of sufcient
magnitude to constitute a risk of
electric shock to persons.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radia-
tors, heat registers, stoves, or other apparatus
(including ampliî‚żers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not î‚żt into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience re-
ceptacles, and the point where they exit from the
apparatus.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of im-
portant operating and maintenance
(servicing) instructions in the litera-
ture accompanying the appliance.
WARNING - TO REDUCE RISK OF
FIRE OR ELECTRICAL SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
To prevent the risk of electric shock, do not remove cover or
back. No user-serviceable parts inside.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
11. Only use attachments/accessories speciî‚żed by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or
table speciî‚żed by the manufacturer,
or sold with the apparatus. When a
cart is used, use caution when mov-
ing the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualiî‚żed service person-
nel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Do not expose this equipment to dripping or
splashing and ensure that no objects î‚żlled with liq-
uids, such as vases, are placed on the equipment.
16. To completely disconnect this equipment from the
a.c. mains, disconnect the power supply cord plug
from the a.c. receptacle.
17. The mains plug of the power supply cord shall
remain readily operable.
18. Do not expose batteries to excessive heat such as
sunshine, î‚żre or the like.
3
Thank You
Your decision to own this McIntosh MC303 Power Ampli-
fier ranks you at the very top among discriminating music
listeners. You now have “The Best.” The McIntosh dedica-
tion to “Quality,” is assurance that you will receive many
years of musical enjoyment from this unit.
Please take a short time to read the information in this
manual. We want you to be as familiar as possible with all
the features and functions of your new McIntosh.
Please Take A Moment
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance claim or
future service. The spaces below have been provided for
you to record that information:
Serial Number: __________________________________
Purchase Date: __________________________________
Dealer Name: ___________________________________
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar
with your McIntosh equipment and any other brands that
may be part of your system. If you or your Dealer wish
additional help concerning a suspected problem, you can
receive technical assistance for all McIntosh products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-724-0549
Customer Service
If it is determined that your McIntosh product is in need of
repair, you can return it to your Dealer. You can also return
it to the McIntosh Laboratory Service Department. For
assistance on factory repair return procedure, contact the
McIntosh Service Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
Copyright 2008 © by McIntosh Laboratory, Inc.
Table of Contents
General Information
Safety Instructions ............................................................. 2
Thank You and Please Take a Moment .............................. 3
Technical Assistance and Customer Service ..................... 3
Table of Contents ............................................................... 3
General Information .......................................................3-4
Connector Information ...................................................... 4
Introduction ........................................................................ 4
Performance Features ........................................................ 4
Dimensions ........................................................................ 5
Installation ......................................................................... 6
Rear Panel Connections and Switch .................................. 7
How to Connect .............................................................. 8-9
Connection Diagrams (Separate Sheet) MC1A and MC1B
Front Panel Displays and Controls ....................................10
How to Operate .................................................................11
Technical Description ..................................................12-15
Photos ...........................................................................16-17
Specifications ....................................................................18
Packing Instruction ...........................................................19
Caution: The MC303 Amplifier weight is 150 pounds (70.3
kilograms). It requires two or more persons to safely
handle when moving the amplifier.
1. The following Connecting Cable is available from the McIn-
tosh Parts Department:
Power Control Cable Part No. 170-202
Six foot, 2 conductor shielded, with two 1/8 inch stereo
mini phone plugs.
2. For additional connection information, refer to the owner’s
manual(s) for any component(s) connected to the MC303.
3. The MC303 mutes the speaker output for approximately two
seconds when first turned on.
4. In the event the MC303 overheats, due to improper ventilation
and/or high ambient temperature, the protection circuits will
activate. The Front Panel Power Guard LEDs will continu-
ously indicate ON and the audio will be muted. When the
MC303 has returned to a safe operating temperature, normal
operation will resume.
5. For the best performance it is important to minimize an im-
pedance mismatch. An impedance mismatch can occur when a
Loudspeaker of a given impedance rating is connected to the
MC303 Output Terminals with a different impedance rating.
For example, a Loudspeaker with an impedance rating of 2
Ohms is connected to the MC303 8 Ohm Output Terminals.
The impedance of a Loudspeaker actually varies as the
Loudspeaker reproduces different frequencies. As a result, the
nominal impedance rating of the Loudspeaker (usually mea-
sured at a midrange frequency) might not always agree with
the impedance of the Loudspeaker at low frequencies where
the greatest amount of power is required.


Product specificaties

Merk: McIntosh
Categorie: Receiver
Model: MC303
Kleur van het product: Zwart, zilver
Gewicht: 70300 g
Breedte: 450.9 mm
Diepte: 558.8 mm
Hoogte: 314.3 mm
Connectiviteitstechnologie: Bedraad
Gemiddeld vermogen: 900 W
Bedoeld voor: Optreden/podium
Audio-uitgangskanalen: 3.0 kanalen
Frequentiebereik: 10 - 100000 Hz
Signaal/ruis-verhouding: 112 dB
Totale harmonische vervorming (THD): 0.005 procent
XLR in: Ja
Piekvermogen per kanaal: 300 W
Speakers connectiviteit type: Poolklem
Dempingsfactor: 40
Output impedance: 8 Ohm

Heb je hulp nodig?

Als je hulp nodig hebt met McIntosh MC303 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver McIntosh

Handleiding Receiver

Nieuwste handleidingen voor Receiver