McIntosh MA8950 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor McIntosh MA8950 (20 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
MA8950
Integrated AmpliïŹer
Owner's Manual
2
FCC Information (For US Customers)
1. IMPORTANT NOTICE:
DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modication
not expressly approved by McIntosh may void your authority,
granted by the FCC, to use the product.
2. CAUTION:
‱ To comply with FCC RF exposure compliance requirement,
separation distance of at least 20cm must be maintained between
this product and all persons.
‱ This product and its antenna must not be co-located or
operating in conjunction with any other antenna or transmitter.
3. COMPLIANCE INFORMATION:
‱ Product Name: Integrated Turntable
‱ Model Number: MTI100
‱ This product contains FCC ID: SSS-BC11X:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, NY 13903
Tel. (607) 723-3512
IC Information (For Canadian Customers)
1. PRODUCT:
This product contains IC : 11012A-BC11X
This product complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) this
product may not cause harmful interference, and (2) this product
must accept any interference received, including interference
that may cause undesired operation. This Class B digital
apparatus complies with Canadian ICES-003.
2. CAUTION:
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that
permitted for successful communication.
Informations sur IC (pour les clients Canadiens)
1. APPAREIL:
Cet appareil contiens IC : 11012A-BC11X
Cet appareil est conforme Ă  la norme CNR-210 du Canada.
L’utilisation de ce dispositif est autorisĂ©e seulement aux deux
conditions suivantes : (1) il ne doit pas produire de brouillage,
et (2) l’utilisateur du dispositif doit ĂȘtre prĂȘt Ă  accepter tout
brouillage radioĂ©lectrique reçu, mĂȘme si ce brouillage est
susceptible de compromettre le fonctionnement du dispositif.
Cet appareil numérique de la classe B est conforme à la norme
Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide ”
NMB-003 du Canada.
2. ATTENTION:
An de rĂ©duire le risque d’interfĂ©rence aux autres
utilisateurs, il faut choisir le type d’antenne et son gain de façon
à ce que la puissance isotrope rayonnée
équivalente (p.i.r.e.) ne soit pas supérieure au niveau requis pour
l’obtention d’une communication satisfaisante.
Canadian Customers:
CAN ICES-003 (B)/NMB-003 (B)
RF Exposure Information
This equipment complies with FCC/IC radiation exposure limits
set forth for an uncontrolled environment and meets the FCC
radio frequency (RF) Exposure Guidelines in Supplement C to
OET65 and RSS-102 of the IC radio frequency (RF) Exposure
rules. This equipment has very low levels of RF energy that are
deemed to comply without testing of specic absorption ratio
(SAR).
Cet Ă©quipement est conforme aux normes d’exposition aux
radiations FCC/IC dénies pour un environnement non contrÎlé
et satisfait les directives d’exposition Ă  la radiofrĂ©quence
(RF) dans le supplément C des OET65 et RSS-102 des rÚgles
d’exposition Ă  la frĂ©quence radio (RF) IC. Cet Ă©quipement a de
trĂšs faibles niveaux d’énergie RF qui sont jugĂ©s conformes sans
test de taux d’absorption spĂ©cique (SAR).
R&TTE(EN) Information
1. DECLARATION OF CONFORMITY
Our products follow the provisions of EC/EU directives:
LV: 2006/95/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
ErP: EC regulation 1275/2008 and its frame work
directive 2009/125/EC
2. IMPORTANT NOTICE:
DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the instructions
contained in this manual, meets R&TTE directive requirements.
Modication of the product could result in hazardous Radio and
EMC radiation.
3. CAUTION:
Separation distance of at least 20cm must be maintained between
this product and all persons.
This product and its antenna must not be co-located or operating
in conjunction with any other antenna or transmitter.
Before You Begin, Read This!
We understand that you're eager to get started using
your McIntosh, but to make sure you have the best
possible experience up front, we highly recommend
taking some time to thoroughly read through this
manual and any included documentation. This will
help to answer any questions you may have and make
sure you stay safe and don't run into any issues that
will prevent you from getting started quickly.
We have designed this manual to make sure your
excitement doesn't wane by the time you fire up
your unit. Experienced McIntosh users will find this
manual as a valuable reference, while newer users will
find it comprehensive enough to get started smoothly
and effectively. As you read through the manual, you
will find that everything is laid out intuitively, and
everything is written succinctly and efficiently. We
want you to spend less time reading, and more time
listening.
If you are an experienced user and are confident in
your ability to quickly get started on your own, you
will find connection diagrams on Page 6 to help guide
you along.
You are absolutely free to reach out to us to ask any
questions or provide feedback about any aspect of
your McIntosh experience. You can reach us via the
contact information on the next page.
3
Thank you from all of us at McIntosh
You have invested in a precision instrument that will
provide you with many years of enjoyment. For the
best experience and your safety, please be sure to heed
and comply with the instructions and warnings found
throughout the included documentation.
If you need further technical assistance, please contact
your dealer who may be more familiar with your
particular setup including other brands. You can also
contact McIntosh with additional questions or in the
unlikely event of needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Technical Assistance: ..(607) 723-3512
Fax: (607) 724-0549 ............................
Customer Service: ......(607) 723-3515
Fax: (607) 723-1917 ............................
Email: support@mcintoshlabs.com .....
Website: mcintoshlabs.com ................
Make a Note
For future reference, you can jot down your serial
number and purchase information here. We can
identify your purchase from this information if the
occasion should arise.
Serial Number:
Purchase Date:
Dealer Name
Copyright 2021 © by McIntosh Laboratory, Inc
Contents
Trademark and License Information 4 ....................
Dimensions ............................................................... 4
Installation ............................................................... 5
Connecting Devices (Diagrams) 6 ............................
Input and Control: 6 ................................................
Output and Loudspeakers: ................................... 7
Navigating the Rear Panel 8 ......................................
Connector and Cable Information 9 ........................
Connecting Loudspeakers ...................................... 10
Preparing the Output Terminal Posts: ................. 10
Preparing Your Speaker Wire: ............................ 10
Connecting Speakers (Bare Wire): ..................... 10
Connecting Speakers (Banana Plug): ................. 10
Connecting Speakers (Spade Lug): ..................... 10
Navigating the Front Panel .................................... 11
Navigating the Remote Control ............................. 12
Setting Up Your MA8950 ....................................... 13
Using Knobs for Menu Navigation: ..................... 13
Entering Setup Menu: ..................................... 13
Entering Trim Functions Menu: ...................... 13
Selecting/Adjusting Menu Settings: ................. 13
Exiting/Navigating Back: ................................ 13
The Setup Menu: .................................................. 13
Input Settings: ................................................. 13
Output Settings: .............................................. 13
Power Control Triggers Settings: ................... 14
Data Ports Settings: ........................................ 14
Passthru Settings: ........................................... 14
HDMI CEC Settings: ....................................... 14
HDMI Lip Sync Mode Settings: ...................... 14
Digital Gain Settings: ..................................... 14
USB Automute Settings: .................................. 14
Comm Port Baud Rate Settings: ..................... 14
IR Codes Settings: ........................................... 14
IR Sensor Settings: .......................................... 15
Power Saving Settings: ................................... 15
Factory Reset: ................................................. 15
Using Your MA8950 ............................................... 15
Powering On/Turning Off: .................................. 15
Selecting an Input for Playback: ......................... 15
Adjusting the Volume: ........................................ 15
Adjusting Trim Functions: ................................... 15
Adjusting Audio Balance: ............................... 15
Enabling/Disabling the Equalizer:.................. 15
Adjusting Input Trim Levels: ........................... 15
Adjusting Phono Resistance (Turntables): ...... 15
Toggling Stereo/Mono: .................................... 15
Toggling the Meter Backlights: ....................... 15
Adjusting Display Brightness: ........................ 15
Enabling/Disabling HXD: ............................... 15
Muting the Audio: ............................................... 15
Getting the Most Out of Your MA8950 ................ 16
Using the Autoformer: ......................................... 16
Using the Five-Band Equalizer: ........................... 16
Using Bi-Amplification on Loudspeakers: .......... 16
Using the HXD with Headphones: ...................... 16
Listening Worry-Free (Auto Protection): ............. 16
Using the Onboard Power Amplifier: .................. 16
Using External Power Amplifiers: ....................... 16
Using MA8950 with External Amp: ................. 16
Using Only External Amps:............................. 16
Using Audio Passthru: ......................................... 16
Viewing Coax/Optical Inputs Sample Rate: ........ 16
Using USB Playback: ........................................... 16
Installing the Software: ................................... 17
Frequently Asked Questions .................................. 17
Amplifier Specifications ......................................... 18
Digital Audio Specifications................................... 18
General Specifications ............................................ 19
Packing Instructions ............................................... 19
MA8950 Packing Material List ............................. 19


Product specificaties

Merk: McIntosh
Categorie: Receiver
Model: MA8950

Heb je hulp nodig?

Als je hulp nodig hebt met McIntosh MA8950 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver McIntosh

Handleiding Receiver

Nieuwste handleidingen voor Receiver