McIntosh C12000 Handleiding
McIntosh
Voorversterkers
C12000
Lees hieronder de 📖 handleiding in het Nederlandse voor McIntosh C12000 (32 pagina's) in de categorie Voorversterkers. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/32
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
C12000
Controller
&
C12000
Preamplifier
Owner’s Manual
2
déconnecter le cordon d’alimentation de l’adaptateur AC/
DC de la prise murale.
18. WARNING: Do not expose batteries or battery pack to
excessive heat such as sunshine, re or the like.
AVERTISSEMENT: Les batteries ou bloc de batter-
ies ne doivent pas etre exposees a une chaleur excessive
telle que celle du soleil, feu ou autre source de chaleur
similaire.
19. CAUTION: danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
ATTENTION: danger d’explosion si la pile n’est pas
remplacée correctement. Ne remplacer que par le même
type ou un type équivalent.
20. Connect mains power supply cord only to a mains socket
outlet with a protective earthing connection.
21. WARNING: The Ethernet connector of this equipment
must not be directly connected to a public network. Con-
nection is to be made only by way of a modem or router
approved for this purpose.
14.
Refer all servicing to qualied service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15. Do not expose this equipment to dripping or splashing and
ensure that no objects lled with liquids, such as vases,
are placed on the equipment.
Ne pas exposer cet appareil à des éclaboussures ou
gouttelettes d’un liquide. Aucun objet remplie de liq-
uide comme par exemple un vase ne doit être placé sur
l’appareil.
16. If this equipment is supplied with a power supply cord
only, the mains plug of the power supply cord shall remain
readily operable. To completely disconnect this equipment
from the a.c. mains remove the plug from the a.c. recep-
tacle.
Si l’équipement est uniquement alimenté par un cordon
d’alimentation, la che du cordon d’alimentation doit de-
meurer aisément accessible. Pour déconnecter complète-
ment l’équipement du réseau d’alimentation, déconnecter
la che du cordon d’alimentation de la prise murale.
17. If this equipment is supplied with AC /DC Adapter with
separate power supply cord or the AC/DC Adapter plug-
ging directly into an a.c. receptacle, they shall remain
readily operable. To completely disconnect this equipment
from the a.c. mains remove the AC /DC Adapter mains
power supply cord from the a.c. receptacle or remove the
AC /DC Adapter when it is directly plugged into the a.c.
receptacle.
Si l’équipement est alimenté par un adaptateur AC/DC
munis d’un cordon d’alimentation ou un adaptateur AC/
DC qui est alimenté directement à la prise murale, ils
doivent demeurer aisément accessibles. Pour déconnecter
complètement l’équipement du réseau d’alimentation,
déconnecter l’adaptateur AC/DC de la prise murale ou
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or ground-
ing-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manu-
facturer.
12. Use only with the cart, stand, tripod, bracket,
or table specied by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus com-
bination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
The lightning ash with arrowhead, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dan-
gerous voltage” within the product’s enclosure that may be of suf-
cient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and mainte-
nance (servicing) instructions in the literature accompanying the
appliance.
ATTENTION:
RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR
WARNING - TO REDUCE RISK OF FIRE OR
ELECTRICAL SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING
TO QUALIFIED PERSONNEL.
To prevent the risk of electric shock,
do not remove cover or back. No
user-serviceable parts inside.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM
BEFORE OPERATING THIS EQUIPMENT.
WARNING
The McIntosh C12000 is a two chassis design,
with separate Preamplifier and Controller chassis.
There are custom interconnecting cables
and custom chassis sockets used
to connect the two chassis together.
Use ONLY the custom interconnect cables supplied
with the C12000 to connect the chassis together.
Do NOT connect the C12000 Left and Right
25-Pin Chassis Sockets to any other component.
Failure to observe this warning
will result in damage to the components connected.
3
Thank You from all of us at McIntosh
You have invested in a precision instrument that
will provide you with many years of enjoyment.
Please take a few moments to familiarize yourself
with the features and instructions to get the
maximum performance from your equipment.
If you need further technical assistance, please
contact your dealer who may be more familiar with
your particular setup including other brands. You
can also contact McIntosh with additional questions
or in the unlikely event of needing service.
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Technical Assistance (607) 723-3512
Fax (607) 724-0549
Customer Service (607) 723-3515
Fax (607) 723-1917
Email support@mcintoshlabs.com
Website www.mcintoshlabs.com
Please Take A Moment
For future reference, you can write down your serial
number and purchase information here. We can
identify your purchase from this information if the
occasion should arise:
Serial Number: ______________________________
Purchase Date: ______________________________
Dealer Name: ______________________________
Copyright © 2021 by McIntosh Laboratory, Inc.
Table of Contents
General Information ........................................4
Connector and Cable Information ...................4
Introduction 5 ......................................................
Performance Features .......................................5
Dimensions - C12000 Controller 6 ......................
Installation - C12000 Controller 7 .......................
Dimensions - C12000 Preamplifier 8 ..................
Installation - C12000 Preamplifier 9 ...................
Navigating the Rear Panel (Controller) ...........10
Navigating the Rear Panel (Preamp) ...............11
Connecting Components .................................12
Input Assignment Chart ..................................13
Navigating the Remote Control ......................14
Front Panels .....................................................15
Controller Connection Diagram .....................16
Preamplifier Connection Diagram..................18
How to Operate the Setup Mode ....................20
Firmware Version ............................................20
Input Settings ..................................................20
Output Settings ...............................................22
Headphone Settings .......................................22
Power Control Triggers ...................................22
Data Ports ........................................................23
Passthru ...........................................................23
Comm Port Baud Rate ....................................24
Remote Control Codes ....................................24
IR Sensor ........................................................24
Power Mode ....................................................24
Factory Reset .................................................25
How to Operate the C12000 ...........................25
Specifications .................................................30
Packing Instructions ......................................31
Product specificaties
| Merk: | McIntosh |
| Categorie: | Voorversterkers |
| Model: | C12000 |
Heb je hulp nodig?
Als je hulp nodig hebt met McIntosh C12000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Voorversterkers McIntosh
3 Oktober 2022
Handleiding Voorversterkers
Nieuwste handleidingen voor Voorversterkers
3 Oktober 2022
3 Oktober 2022