McCulloch ROB S400 Handleiding

McCulloch Robotmaaier ROB S400

Lees hieronder de 📖 handleiding in het Nederlandse voor McCulloch ROB S400 (56 pagina's) in de categorie Robotmaaier. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/56

EN, English

EN, EnglishEN, English

Operator's manual

Operator's manualOperator's manual

ROB S400, ROB S500,

ROB S400, ROB S500,ROB S400, ROB S500,

ROB S600

ROB S600ROB S600

Read the operator's manual carefully and make sure that you

Read the operator's manual carefully and make sure that youRead the operator's manual carefully and make sure that you

understand the instructions before you use the product.

understand the instructions before you use the product.understand the instructions before you use the product.

Contents

ContentsContents

1 Introduction

1.1 Introduction.................................................3

1.2 Product overview........................................4

1.3 Symbols on the product..............................5

1.4 Symbols on the display.............................. 5

1.5 Symbols on the battery...............................5

1.6 General manual instructions.......................6

1.7 Menu structure overview............................ 7

1.8 Display........................................................7

1.9 Keypad....................................................... 8

2 Safety

2.1 Safety information...................................... 9

2.2 Safety definitions...................................... 10

2.3 Safety instructions for operation...............10

3 Installation

3.1 Introduction - Installation.......................... 14

3.2 Main components for installation..............14

3.3 General preparations................................14

3.4 Before the installation of the wires........... 14

3.5 Installation of the product......................... 19

3.6 To put the wire into position with stakes...22

3.7 To bury the boundary wire or the

guide wire....................................................... 22

3.8 To extend the boundary wire or the

guide wire....................................................... 22

3.9 After the installation of the product...........22

3.10 To do the product settings......................23

4 Operation

4.1 The ON/OFF button..................................30

4.2 To start the product.................................. 30

4.3 Operating modes......................................30

4.4 Park modes.............................................. 31

4.5 To stop the product.................................. 31

4.6 Switch off..................................................31

4.7 Schedule and Standby............................. 32

4.8 To charge the battery............................... 33

4.9 Adjust the cutting height........................... 33

5 Maintenance

5.1 Introduction - maintenance.......................34

5.2 Clean the product..................................... 34

5.3 Replace the blades...................................35

5.4 Battery...................................................... 35

5.5 Winter service...........................................36

6 Troubleshooting

6.1 Introduction - troubleshooting...................38

6.2 Fault messages........................................ 38

6.3 Information messages.............................. 43

6.4 Indicator lamp in the charging station.......44

6.5 Symptoms................................................ 45

6.6 Find breaks in the loop wire..................... 46

7 Transportation, storage and disposal

7.1 Transportation.......................................... 49

7.2 Storage.....................................................49

7.3 Disposal....................................................49

8 Technical data

8.1 Technical data.......................................... 50

8.2 Registered trademarks............................. 52

9 Warranty

9.1 Warranty terms.........................................53

10 Applicable to US/CA market

10.1 Supplier's Declaration of Conformity...... 54

10.2 Compliance requirements...................... 54

22 1411 - 006 -

1 Introduction

1 Introduction1 Introduction

1.1 Introduction

1.1 Introduction1.1 Introduction

Serial number:

Serial number:Serial number:

PIN code:

PIN code:PIN code:

Product registration key:

Product registration key:Product registration key:

The serial number is on the product rating plate and on the product carton.

• Use the serial number to register your product on www.mcculloch.com.

1.1.1 Support

1.1.1 Support1.1.1 Support

For support about the product, speak to your

McCulloch servicing dealer.

1.1.2 Product description

1.1.2 Product description1.1.2 Product description

Note:

Note: Note: McCulloch regularly updates the

appearance and function of the products. Refer

Support on page 3

The product is a robotic lawn mower. The product

has a battery power source and cuts the grass

automatically. It continuously alternates between

mowing and charging. The movement pattern is

random, which means that the lawn is mowed

evenly and with less wear. The boundary wire

and the guide wire controls the movement of the

product within the work area. Sensors in the

product senses when it is approaching the

boundary wire. The front of the product always

passes the boundary wire by a specific distance

before the product turns around. When the

product hits an obstacle or approaches the

boundary wire the product selects a new

direction.

The operator selects the operation settings with

the keys on the keypad. The display shows the

selected and possible operation settings, and the

operation mode of the product.

1.1.2.1 Mowing technique

1.1.2.1 Mowing technique1.1.2.1 Mowing technique

The product is emission free, easy to use and

saves energy. The frequent cutting technique

improves the grass quality and decreases the

use of fertilizers. Collection of grass is not

necessary.

1.1.2.2 Find the charging station

1.1.2.2 Find the charging station1.1.2.2 Find the charging station

The product operates until the battery state of

charge is low. Then it follows the guide wire to

the charging station. The guide wire is laid from

the charging station towards, for instance, a

remote part of the work area or through a narrow

passage. The guide wire is connected with the

boundary wire and makes it much easier and

faster for the product to find the charging station.

1411 - 006 - Introduction - 3

Product specificaties

Merk:	McCulloch
Categorie:	Robotmaaier
Model:	ROB S400
Kleur van het product:	Black, Yellow
Ingebouwd display:	Ja
Soort:	Robotgrasmaaier
Stroombron:	Batterij/Accu
Oplaadtijd:	60 uur
Smartphone ondersteuning op afstand:	Ja
Automatisch terug naar basisstation:	Ja
Batterij capaciteit:	2 Ah
Maximale grasoppervlakte:	400 m²
Maaibreedte:	160 mm
Aantal maaihoogte standen:	Ja
Minimale maaihoogte:	20 mm
Maximale maaihoogte:	50 mm
Geschikt voor hellingen tot:	35 procent
Maaischema:	Ja
Accuduur (max):	65 min
Mulchfunctie:	Ja
Anti-diefstalbeveiliging:	Ja