MaxGear MAX 5073 super bass system Handleiding
MaxGear
Versterker
MAX 5073 super bass system
Lees hieronder de đź“– handleiding in het Nederlandse voor MaxGear MAX 5073 super bass system (28 pagina's) in de categorie Versterker. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
MAX 5073
Super Bass System
INTRODUCTION
Amplifiers provide high-performance sound reinforcement for your mobile audio equipment. Its ver-
satility enables compatibility with optional Equalizers, Frequency Dividing Network Crossovers, and
other audio processors in a customized system. The Multi-Mode bridging capabilities allow flexibility
in hosting several different speaker configurations.
To achieve optimum performance. We suggest that your stereo components are installed by an aut-
horized MAXGEAR dealer. It is highly recommended that you read this Owners Manual before begin-
ning installation.
AMPLIFIER FEATURES
•SILVER RCA CONNECTORS
• DC TO DC CIRCUITRY
•POWER/PROTECTION LED
• GOLD PLATED SCREW CONNECTIONS
• THERMAL/SHORT/OVERLOAD PROTECTION CIRCUTIRY
• VARIABLE BASS BOOST (0-18Db)
•HI/LO SELECT SWITCH
•VARIABLE HPF/LPF CROSSOVER
• ADJUSTABLE INUT SENSITIVTY
• SUBSONIC FILTER 20-50HZ (V-317SX)
SUBWOOFER FEATURES
•5/8” MDF CONSTRUCTION
•HEAVY DUTY INDUSTRIAL CARPET
• HIGH POWER SUBWOOFERS
WARNING
High powered audio systems in a vehicle are capable of generating “live Concert” high levels of sound
pressure. Continued exposure to excessively high volume sound levels may cause hearing loss or
damage. Also, operation of a motor vehicle while listening to audio equipment at high volume levels
may impair your ability to hear external sounds such as; horns, warning signals, or emergency vehi-
cles, thus constituting to a potential traffic hazard.
MAX 5073
Super Bass System
MOUNTING YOUR AMPLIFIER
The mounting position of your Amplifier will have a great effect on its ability to dissipate the heat
generated during normal operation. It has an ample heat sink for heat dissipation, and is also design-
ed with a thermal shut-down protection circuit, making it reasonably tolerant of mounting variations.
Any configuration which allows moving air to be directed over the cooling fins will improve heat dis-
sipation dramatically. DO NOT enclose the amplifier in a small box or cover it so that air cannot flow
around the heat sink fins.
Temperatures in car trunks have been measured as high as 175 F (80 C) in the summer time. Since
the thermal shut-down point for the Amplifier is 185 F (85 C), it is easy to see that it must be moun-
ted for maximum cooling capability. To achieve maximum advantage of convection air flow in an
enclosed trunk, mount the amplifier in a vertical position, on a vertical surface.
Cooling requirements are considerably relaxed when mounting inside the passenger compartment
since the driver will not often allow temperatures to reach a critical point. Floor mounting under the
seat is usually satisfactory as long as there is at least 1 inch (2,5cm) above the Amplifier’s fins for
ventilation.
a. Select a suitable location that is convenient for mounting, is accessible for wiring, and has ample
room for air circulation and cooling.
b. Use the amplifier as a template to mark the mounting holes. Remove the Amplifier and drill 6 holes.
USE EXTREME CAUTION, INSPECT UNDERNEATH SURFACE BEFORE DRILLING.
c. Secure the Amplifier using the screws provided.
CONNECTING THE POWER
CAUTION! AS A PRECAUTION. IT IS ADVISABLE TO DISCONNECT THE VEHICLE’S BATTERY BEFORE
MAKING CONNCETIONG TO THE+12 VOLT SUPPLY WIRING.
10 GAUGE (or a large gauge of wire if planning for additional Amplifiers) wire is recommend the power
and ground wires. 20 Gauge, for the remote turn-on wire. Both types are available at most Mobile
Audio Dealers or installation Shops.
GROUND To Vehicle Chassis
Toavoid unwanted ignition noise caused by ground loops, it is essential that the Amplifier be groun-
ded to a clean, bare, metal surface of the vehicle’s chassis.
NOTE: GROUND WIRE SHOULD NOT BE EXTENDED MORE THAN 3 FT.(1 METER)
USING THIS METHOD CAN CAUSE TURN ON AND TRUN OFF TRANSIENTS (NOISE)
+12 Volt (Fused)Constant Power: To Battery (+)
Due to the power requirements of the Amplifier, this connection should be made directly to the posi-
tive (+) terminal of battery. For safety measures, install an in-line 50 Amp Fuse Holder(not
included)as close to the battery positive (+) terminal as possible, with an ampere rating not to exceed
the total value of fuses in amp.
Remote Turn-On Input: To Power Antenna output of Car Stereo
This Amplifier is turned “ON” remotely when the vehicle’s stereo is turned “ON”.
NOTE: IF YOUR RADIO DOES NOT HAVE A +12 VOLT OUTPUT LEAD WHEN THE RADIO IS TURNED
ON, “RMT” TERMINAL ON THE AMPLIFIER CAN BE CONNECTED TO VEHICLE’S ACCESSORY CIRCUIT
THAT IS LIVE WHEN THE KEY IS “ON”.
MAX 5073
Super Bass System
FEATURES & CONTROL
Remote Tun ON
TO Power Antenna
BATTERY
FUSE Holder
Near Battery
Ground
Chassis -!
Ground
Chassis
Product specificaties
| Merk: | MaxGear |
| Categorie: | Versterker |
| Model: | MAX 5073 super bass system |
Heb je hulp nodig?
Als je hulp nodig hebt met MaxGear MAX 5073 super bass system stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Versterker MaxGear
5 September 2023
Handleiding Versterker
- Versterker Kenwood
- Versterker Onkyo
- Versterker Pioneer
- Versterker UPC
- Versterker Yamaha
- Versterker AB International
- Versterker Advance Acoustic
- Versterker Akg
- Versterker Alecto
- Versterker Alto Professional
- Versterker American Audio
- Versterker Ampeg
- Versterker Amplicom
- Versterker Arcam
- Versterker Audica
- Versterker Auna
- Versterker Behringer
- Versterker Bellman
- Versterker Beyerdynamic
- Versterker Bluetech
- Versterker DAP Audio
- Versterker Denon
- Versterker Eden
- Versterker Elektra
- Versterker Engl
- Versterker Fender
- Versterker Fenton
- Versterker Geemarc
- Versterker Harman Kardon
- Versterker Hartke
- Versterker Hifonics
- Versterker HQ Power
- Versterker HUMANTECHNIK
- Versterker Iriver
- Versterker Koda
- Versterker Konig Electronic
- Versterker Luxman
- Versterker Marantz
- Versterker Marquant
- Versterker Marshall
- Versterker Monacor
- Versterker NAD
- Versterker Naim
- Versterker Nedis
- Versterker Novero
- Versterker Peavy
- Versterker Power Dynamics
- Versterker Pyle
- Versterker Quadral
- Versterker Randall
- Versterker Reloop
- Versterker Rotel
- Versterker Samson
- Versterker Sansui
- Versterker Sherwood
- Versterker Skytec
- Versterker Skytronic
- Versterker Stagg
- Versterker Tangent
- Versterker Teac
- Versterker Tronics
- Versterker Velodyne
- Versterker Vonyx
- Versterker Ibiza Sound
Nieuwste handleidingen voor Versterker
24 December 2023
24 December 2023
16 September 2023
16 September 2023
15 September 2023
17 September 2023
15 September 2023
15 September 2023
15 September 2023
15 September 2023