Max Led Parbar Handleiding

Max Verlichting Led Parbar

Lees hieronder de 📖 handleiding in het Nederlandse voor Max Led Parbar (21 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 94 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
LED PARBAR 4-WAY 3x 4- -1 RGBWin
Ref. nr.: 150.485
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA O BSƁUGI
V1.1
2
4
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched o until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specied, the light eect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or re.
INSTALLATION
Attention:
 The installation of the product has to be built and constructed in a way that it can hold 10 times the weight for 1 hour
without any harming deformation.
 The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net. This
secondary safety attachment must be constructed in a way that no part of the installation can fall down if the main
attachment fails.
 Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging and servicing.
 The operator has to make sure that safety-relating and machine-technical installations are approved by an expert
before taking into operation for the rst time and after changes before taking into operation another time.
 The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled
person once a year.
 The xture should be installed in the position where persons cannot reach and where persons may walk by or be
seated.
DISPLAY
The control board oer several features: you can simple set the starting address,
run the pre-programmed program or make a reset. The main menu is accessed
by pressing the -button, browse through the submenu by pressing or Mode Up
Down.
Press the -button in order to select the desired menu. Enter
You can change the selection by pressing or Conrm every selection Up Down.
by pressing the -button. Enter
You can leave every mode by pressing the -button. The functions provided Mode
are described later in this manual.
CAUTION: Please consider the respective national norms during the
installation! The installation must only be carried out by an
authorized employee or dealers!
CAUTION: When installing the device, make sure there is no highly in
inammable material (decoration articles, etc.) in between a
distance of min 0.5 meter.


Product specificaties

Merk: Max
Categorie: Verlichting
Model: Led Parbar

Heb je hulp nodig?

Als je hulp nodig hebt met Max Led Parbar stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Max

Max

Max 37344 Handleiding

28 Oktober 2022
Max

Max 37496 Handleiding

28 Oktober 2022

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting