Mastervolt MasterBus LIN Bus Interface Handleiding

Mastervolt Acculader MasterBus LIN Bus Interface

Lees hieronder de 📖 handleiding in het Nederlandse voor Mastervolt MasterBus LIN Bus Interface (4 pagina's) in de categorie Acculader. Deze handleiding was nuttig voor 47 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/4
MasterBus LIN Interface
Interface from MasterBus to LIN
USER AND INSTALLATION MANUAL
10000013879/00
2
LIN Interface
– User and Installation Manual
1 GENERAL INFORMATION
Use of this manual
This manual serves as a guideline for the safe and effective operation of the MasterBus LIN Interface. Keep this
manual at a secure place!
Warranty
Mastervolt assures the product warranty of the LIN Interface during two years after purchase, on the condition
that the product is installed and used according to the instructions in this manual.
Installation or use not according to these instructions may result in under performance, damage or failure of the
product and may void this warranty. The warranty is limited to the cost of repair and/or replacement of the
product. Costs of labour or shipping are not covered by this warranty.
CAUTION!
Never remove the identification label.
Liability
Mastervolt can accept no liability for:
• consequential damage due to use of the LIN Interface;
• possible errors in the manuals and the results thereof;
• use that is inconsistent with the purpose of the product.
Disclaimer
Our products are subject to continual development and improvement. Therefore, additions or modifications to the
products may cause changes to the technical data and functional specifications. No rights can be derived from
this document. Please consult our online Terms & Conditions of Sale.
Correct disposal of this product
This product is designed and manufactured with high quality materials and components, which
can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a
product, it means the product is covered by the European Directive 2012/19/EU.
Please be informed about the local separate collection system for electrical and electronic
products.
Please act according to your local rules and do not dispose of your old products with your normal household
waste. The correct disposal of your old product will help prevent potential negative consequences to the
environment and human health.
2 INSTALLATION
The LIN Interface is designed for use in vehicles equipped with a LIN enabled (secondary) alternator option. For a
complete list of supported vehicle brands and models, please visit the Mastervolt website: www.mastervolt.com.
The LIN Interface can be used in combination with Mastervolt MLI batteries (MLI Ultra 12/2500 or 12/5000). It will
guaranty a seamless integration of the MLI Ultra battery into the vehicles LIN Bus and provide the alternator and
Engine Control Unit (ECU) with the necessary data from the MLI Ultra battery to monitor and charge the battery
accordingly. Only one MLI Ultra battery is allowed to be present in the connected MasterBus network.
LIN Interface – User and
Installation Manual
3
Steps:
1. Mount the LIN Interface to any flat surface. The LIN Interface comes with
a DIN rail mount option. Alternatively, use the two mounting holes (1).
2. Wire the screw terminal (2).
a. LIN Battery +
b. LIN Bus Line
c. LIN GND
Make sure that the power cable is fused with a 1A fuse.
3. Insert the MasterBus cable (included, 1m) to integrate the interface into
the MasterBus network. Make sure that the MasterBus network is
properly terminated at the two ends with a terminator (3).
4. A flashing LED (4) indicates that the MasterBus communication is
working.
5. Use a MasterBus compatible remote control panel such, as the
EasyView 5 or PC with MasterAdjust software, to monitor the battery.
See chapter 3 for the LIN Interface MasterBus features. For more information
refer to the user manual of the remote control panel
3 OPERATION
The LIN Interface requires no configuration. Once installed correctly, it will start operating automatically. The LIN
Interface, once powered from the LIN side, automatically starts polling the necessary data from the MLI Ultra
battery via MasterBus. It will translate this data into vehicle conform LIN messages and respond to LIN requests
received from the vehicle. In case of no active communication on the LIN Bus, the LIN Interface will go to sleep
mode (disappear from the MasterBus), until the LIN Bus communication becomes active again.
To maintain the optimal battery capacity, the battery should be charged to 100% every week.
The following table shows the LIN Interface items displayed on a monitoring device connected to the MasterBus
network.
MONITORING
DESCRIPTION
ADJUSTABLE RANGE
General
MLI Status
MLI battery status, is the battery offline or online
(read only)
MLI Data
SOC
Battery state of charge in %
(read only)
Time remaining
Time of battery use left at the actual load in hh:mm:ss
(read only)
Cap. consumed
Battery capacity consumed in Ah
(read only)
Cap. Remaining
Battery capacity remaining in Ah
(read only)
Voltage
Battery voltage in V
(read only)
Current
Current measured by the battery in A
Positive value: charging, Negative value: discharging
(read only)
Temperature
Internal temperature of the battery in °C
(read only)
Charge voltage
Current desired charge voltage in V communicated to the
vehicle
(read only)
Nom. Capacity
Nominal battery capacity in Ah
(read only)
CONFIGURATION
Device
Language
Interface menu language on a monitoring device connected to
the MasterBus network [default: English]
(read only)
Serial #
The serial number of the LIN Interface
(read only)
Name
User defined device name, visible throughout the MasterBus
network [default: LIN]
Up to 12 characters
1
4
3

Product specificaties

Merk: Mastervolt
Categorie: Acculader
Model: MasterBus LIN Bus Interface

Heb je hulp nodig?

Als je hulp nodig hebt met Mastervolt MasterBus LIN Bus Interface stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Acculader Mastervolt

Mastervolt

Mastervolt Magic 24 12-20 Handleiding

26 Februari 2023
Mastervolt

Mastervolt Mass Combi Pro 24 3500-100 Handleiding

26 Februari 2023
Mastervolt

Mastervolt Mass 24 100-2 Handleiding

26 Februari 2023
Mastervolt

Mastervolt Digital AC 1x6A Handleiding

26 Februari 2023
Mastervolt

Mastervolt CombiMaster 12 2000-60A Handleiding

26 Februari 2023
Mastervolt

Mastervolt Mac 24 12-20 Handleiding

26 Februari 2023
Mastervolt

Mastervolt Mass 48 50 Handleiding

26 Februari 2023
Mastervolt

Mastervolt DC Master 12 12-3A Handleiding

26 Februari 2023
Mastervolt

Mastervolt Laadstroomverdeler Battery Mate 2503 IG Handleiding

26 Februari 2023
Mastervolt

Mastervolt Mass Combi Ultra 48 3500-50 Handleiding

26 Februari 2023

Handleiding Acculader

Nieuwste handleidingen voor Acculader

Osram

Osram BATTERYstart 300 Handleiding

17 November 2024
Apa

Apa 16547 Handleiding

16 November 2024
Metabo

Metabo SC 30 Handleiding

15 November 2024
Anker

Anker PowerPort 4 Handleiding

15 November 2024
Anker

Anker PowerCore Speed 10000 QC A1266 Handleiding

15 November 2024
Absina

Absina 52-230-1005 Handleiding

12 November 2024
Digitus

Digitus DK-3P16-075 Handleiding

2 November 2024
Digitus

Digitus DK-3P16-050 Handleiding

2 November 2024
Digitus

Digitus DK-1P32-S-100 Handleiding

2 November 2024
Digitus

Digitus DK-3P16-S-050 Handleiding

2 November 2024