Master Lock LTW205GYC Handleiding
Master Lock
Kluis
LTW205GYC
Lees hieronder de 📖 handleiding in het Nederlandse voor Master Lock LTW205GYC (8 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
Fire Safe Owner’s Manual
LFW082FTC, LFW123FTC, LTW123GTC, LFW205FYC, LTW205GYC
: Masterlock.eu/Safes
INSTRUCTIONS FOR USE ......................................................... 2
MODE D’EMPLOI ..................................................................... 5
GEBRAUCHSANWEISUNG .........................................................8
GEBRUIKSAANWIJZING ........................................................... 11
INSTRUCCIONES DE USO .......................................................... 14
ISTRUZIONI PER L’USO ............................................................ 17
INSTRUÇÕES DE UTILIZAÇÃO .................................................... 20
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ ...................................................................23
BRUKSANVISNING ..................................................................26
BRUGSANVISNING ................................................................. 29
KÄYTTÖOHJE ..........................................................................32
BRUKSANVISNING ..................................................................35
INSTRUKCJA UŻYCIA ...............................................................38
HASZNÁLATI ÚTMUTATÓ ..........................................................41
MOD DE UTILIZARE ................................................................. 44
NÁVOD K POUŽITÍ ................................................................... 47
ИНСТРУКЦИЯ ПО ПPИMEHEHИЮ............................................. 50
KULLANIM TALİMATI ...............................................................53
使用説明書 .......................................................................56
2
ENGLISH
NOTE: • Make sure the handle is rotated all the way up in the
horizontal position before unlocking the safe.
• If the door does not open easily, repeat steps 1-5.
• If you exert too much force on the handle, the handle will
move without moving the bolts. If this happens, you will
hear a ’click.’ DO NOT be alarmed. This feature is designed
to protect the bolts from being overpowered by force. If this
occurs, simply exert force in the opposite direction (lifting up)
until the handles ’clicks’ back into place and repeat steps 1-5
to open your safe.
Locking your safe
1 Close the door and pull the
handle upward until the handle
is horizontal.
For water-resistant units,
additional pressure to the front,
left side of the door may need to
be applied prior to rotating the
handle.
2 Spin the dial at least 2x to the
right (clockwise).
3 FOR DUAL KEY/COMBINATION
LOCKS ONLY, insert key into the
lock, turn to the ’locked’ position,
then remove the key.
Programmable Electronic Lock
NOTE: Store code (and keys if
equipped) in a secure location
(other than in the safe).
Preparing your safe for first time use
1 Ensure any shipping screws have
been removed. Located on the
inside of the door.
NOTE: Your unit may or may not
have a shipping screw.
Fire Safe
Thank you for choosing Master Lock to store all your important documents and valuables.
We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.
Warning
Gun warning
This product is not intended for the secure storage of all materials.
Items such as firearms, other weapons, combustible materials, or
medication should NOT be stored in this unit.
Warning
DO NOT store delicate items directly in your safe.
Master Lock products which offer fire protection have a proprietary
insulation that has a high moisture content. In addition, the Master
Lock advanced safes close airtight to offer water resistance, which
may also cause moisture to accumulate inside your safe. The desiccant
packet included in your safe during shipment should be left in your
safe. DO NOT DISCARD IT. It is intended to help absorb moisture which
may accumulate inside your safe. Please open your unit once every two
weeks to avoid moisture accumulation.
If you choose to store delicate items such as jewelry with working parts,
watches, stamps, or photos in your safe, we recommend putting them in
an air-tight container, prior to placing them in the safe for storage.
NOTE: Master Lock will not be responsible for any damage or loss of
items placed in the unit due to moisture.
Warning
DO NOT store pearls in this safe.
In the event of a fire, potential damage to delicate pearls occurs at
temperatures much lower than the 350°F (176°C) interior performance
measure which the UL classification performance standard indicated
guarantees. Therefore, DO NOT store pearls in your Master Lock product.
Warning
No computer disks, audio-visual cassettes or photo negatives.
This product is not intended to protect computer floppy or diskettes,
cartridges and tapes, audio or video cassettes or photo negatives.
Warning
Your safe is only part of your total security protection.
Master Lock recommends that you store your safe in closets, offices,
basements, bedrooms and any other locations that are convenient for
you but out of direct line of sight from prying eyes. The location of the
safe does not affect the safe’s ability to protect your valuables inside.
Important
If you experience any problems or challenges with your safe, please
contact us. Many issues can be resolved quickly without the product
being returned. www.masterlock.eu/safes
Mechanical Combination Lock
NOTE:
• Store combination (and keys if
equipped) in a secure location
(other than in the safe).
• Combination can not be
changed.
Preparing your safe for first time use
1 Ensure any shipping screws have
been removed. Located on the
inside of the door.
NOTE: Your unit may or may not
have a shipping screw.
2
M100TEST
SN100TEST01*
10-22-33 RLR
2075
Find your combination on the back
of this owner’s manual.
WARNING: Test your combination several times before
putting valuables inside.
Unlocking your safe
1 FOR DUAL KEY/COMBINATION
LOCKS ONLY, insert key into the
lock, turn to the ’unlocked’ position,
then remove the key
This is a secondary locking feature
not an override key.
2 Rotate dial to ’0’, then rotate
right (clockwise) passing ’0’
three times, continue rotating
until you reach the first number
in your combination.
3 Rotate dial to the left
(counterclockwise). Go PAST the
second number of your
combination ONCE and stop the
SECOND time the dial reaches the
number.
4 Rotate the dial to the right
(clockwise), stop when you reach
the third number in your
combination.
5 Rotate the handle downward to
open the door.
This may take a limited amount
of force if you have a water-
resistant safe.
3
ENGLISH
2 A Slide out the battery drawer
on the side of the keypad.
B Insert 4 AAA alkaline
batteries (not included)
Note: Do not use rechargeable
batteries or any other type of
non-alkaline battery. Do not mix
old and new batteries. Do not mix
alkaline and standard batteries.
C Slide battery drawer back
into keypad.
3
M100TEST
SN100TEST01*
12345
Find your 5 digit factory code on
the back of this owner’s manual.
WARNING: Test your code several times before putting
valuables inside.
Unlocking your safe
1 FOR DUAL KEY/COMBINATION
LOCKS ONLY, insert key into the
lock, turn to the ’unlocked’
position, then remove the key
This is a secondary locking
feature not an override key.
2 A Enter the 5 digit factory code
found on the back of the
owner’s manual.
Note: You may have to lift
the handle while entering
the combination.
B A green light will indicate the
code is correct. You will have
4 seconds to turn the handle
to unlock your safe.
3 Rotate the handle downward to
open the door.
This may take a limited
amount of force if you have a
water-resistant safe.
NOTE: • Make sure the handle is rotated all the way up in the
horizontal position before unlocking the safe.
• If you exert too much force on the handle, the handle will
move without moving the bolts. If this happens, you will
hear a ’click.’ DO NOT be alarmed. This feature is designed
to protect the bolts from being over powered by force. If this
occurs, simply exert force in the opposite direction (lifting up)
until the handles ’clicks’ back into place and repeat steps 1-3
to open your safe.
• Delay mode will occur if three consecutive invalid entries have
been tried. Red LED will blink on and off to let you know the
safe is in delay mode. This will cause the system to shutdown
for two minutes. DO NOT remove the batteries to restart the
system it will only increase the length of time for the system
shutdown.
Locking your safe
1 Close the door and pull the
handle upward until the handle is
horizontal.
For water-resistant units,
additional pressure to the front,
left side of the door may need
to be applied prior to rotating
the handle.
2 FOR DUAL KEY/ELECTRONIC
LOCKS ONLY, insert key into the
lock, turn to the ’locked’ position,
then remove the key.
NOTE: If your safe does not
appear to be working properly,
please check to make sure you
are using NEW alkaline batteries
before contacting Master Lock
Customer Service.
Programming information
Three code options:
Factory code:
The safe will ALWAYS unlock using
this 5 digit code (found on the back of
the owner’s manual). This code cannot
be deleted.
User code:
A 5 digit programmable code of your
choosing that can be changed or
deleted or changed.
Secondary code:
A second 5 digit programmable code of
your choosing that can be changed or
deleted. Can only be programmed after
a user code has been activated.
NOTE: • The “C” key is a clear key. This can be used at anytime to
clear the system and return to standby mode – unless you are
in delay mode (3 consecutive invalid entries).
• The 5 digit factory code cannot be deleted. However, you may
add and delete additional codes.
This safe can store up to three codes at one time. One factory
code and two additional programmable codes.
Programming the user code
To ADD a user code:
1 Press the “P” key.
2 Enter the 5 digit factory code found on the back of your owner’s
manual.
3 The light will flash green and then you will have five seconds to
enter your own personal 5 digit user code.
To DELETE a user code:
1 Press the “P” key.
2 Enter the 5 digit factory code.
3 Enter 0,0,0,0,0.
NOTE: • The electronic lock will NOT indicate that it has deleted the
user code – please test the code to make sure it has been
deleted.
• Test with door open when programming.
Programming the secondary code
To ADD a secondary code:
1 Press the “P” key two times.
2 Enter the 5 digit user code previously programmed.
3 The light will flash green and then you will have five seconds to
enter your own personal 5 digit secondary code.
To DELETE a secondary code:
1 Press the “P” key two times.
2 Enter the 5 digit user code.
3 Enter 0,0,0,0,0.
NOTE: • The electronic lock will NOT indicate that it has deleted the
secondary code – please test the code to make sure it has
been deleted.
How to operate the light
The safe you have purchased may include a light. This is a long-lasting
LED light. Not all safes include a light.
The batteries that operate the keypad
are the same batteries that operate the
light. If the light in your unit does not
turn on, please change your batteries.
The light will turn on every time you
enter your code and will remain on
for 30 seconds. The light duration has
three options – off, 30 seconds, and 60 seconds.
To turn the light off:
1 Press the “0” button.
2 Press the “P” button.
3 Press the “3” button.
To turn the light on for 30 seconds:
1 Press the “0” button.
2 Press the “P” button.
3 Press the “4” button.
To turn the light on for 60 seconds:
1 Press the “0” button.
2 Press the “P” button.
3 Press the “5” button.
NOTE: • If the light duration is 60 seconds, the battery life will be
reduced at a faster rate.
Operating sound features
For Programmable Electronic Lock Only
The tones of the key pad may be turned on and off depending on user
preference.
Turn sound off:
1 Press “O”.
2 Press “P” key.
3 Press “2”.
Turn sound on:
1 Press “O”.
2 Press “P” key.
3 Press “1”.
Product specificaties
| Merk: | Master Lock |
| Categorie: | Kluis |
| Model: | LTW205GYC |
Heb je hulp nodig?
Als je hulp nodig hebt met Master Lock LTW205GYC stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Kluis Master Lock
3 Mei 2023
3 Mei 2023
3 Mei 2023
3 Mei 2023
3 Mei 2023
3 Mei 2023
3 Mei 2023
3 Mei 2023
3 Mei 2023
30 April 2023
Handleiding Kluis
- Kluis Philips
- Kluis Honeywell
- Kluis Abus
- Kluis Avanti
- Kluis Burg-Wachter
- Kluis Dometic
- Kluis Duralock
- Kluis EasySafe
- Kluis Ferm
- Kluis Filex
- Kluis FireKing
- Kluis First Alert
- Kluis Fluke
- Kluis Hama
- Kluis Handson
- Kluis M-Locks
- Kluis Nauta
- Kluis Nedis
- Kluis Perel
- Kluis Phoenix
- Kluis Protector
- Kluis Renkforce
- Kluis ROMA
- Kluis Rottner
- Kluis Royal Safe
- Kluis Royal Sovereign
- Kluis Salvus
- Kluis Sentry
- Kluis Sistec
- Kluis SMC
- Kluis Sygonix
- Kluis Technomax
- Kluis Thule
- Kluis Toolland
- Kluis Topcraft
- Kluis Tulox
- Kluis Varo
- Kluis Westfalia
- Kluis Workzone
- Kluis Yale
- Kluis Jewel
- Kluis Juwel
- Kluis Olympia
- Kluis Oxloc
- Kluis First Austria
- Kluis Guzzanti
- Kluis Steren
- Kluis Barska
- Kluis Conrad
- Kluis SereneLife
- Kluis Challenge
- Kluis MSW
- Kluis Hard Head
- Kluis Kidde
- Kluis SentrySafe
- Kluis CAWI
- Kluis Kreator
- Kluis Fichero
- Kluis Kreator-Varo
- Kluis Rottner Tresor
- Kluis Olymp
- Kluis Suncast
- Kluis Winholt
- Kluis Homak Security
- Kluis NOFIRE
- Kluis Stamony
Nieuwste handleidingen voor Kluis
15 November 2024
15 November 2024
15 November 2024
13 November 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
1 Oktober 2024
1 Oktober 2024