Maruyama BC4320i Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Maruyama BC4320i (16 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
P r o f e s s i o n a l
Completely read and understand this manual PRIOR to using this product.
Lea y entienda este manual a fondo, ANTES de usar este producto.
O W N E R ' S O P E R A T O R ' S M A N U A L
M a n u a l d e l P r o p i e t a r i o u O p e r a d o r
BRUSH CUTTER
CORTADORA
BC4320i
β€” US-1 β€”
SAFETY INSTRUCTIONS
01. Read and understand this Instruction Manual before using the brushcutter. Be thoroughly familiar with the prop-
er use of the brushcutter.
02. Never allow children to operate the brushcutter. it is not a toy. Never allow adults to operate the unit without first
reading the Instruction Manual.
03. Become familiar with the controls and know how to stop the engine quickly.
04. ALWAYS WEAR SAFETY GLASSES or other suitable eye protection, and hearing protection.
05. Keep the area of operation clear of all persons, particularly small children and pets.
06. Never operate a brushcutter when you are fatigued.
07. Never operate without proper shields or other protective safety devices in place.
08. Dress properly; do not wear loose clothing or jewelry. They can be caught in moving parts. Always wear sub-
stantial footwear, long pants and long sleeved shirt.
09. Gasoline is highly flammable; handle it carefully. Fill the fuel tank with the correct mixture of gasoline and oil
before trying to start the engine.
10. Use an approved fuel container to store the gasoline/oil mixture.
11. Do not fill the tank when the engine is hot or running.
12. Do not smoke while handling gasoline.
13. Fill the fuel tank outdoors and up to about 10mm from the top of the tank, not the top of the filler neck.
14. Wipe any spilled gasoline before starting the engine.
15. Always be sure of your footing; keep a firm hold of the handles with both hands, and walk, never run.
16. Use the right tool for the job. Do not use the brushcutter for any job that is not recommended by the manufactur-
er.
17. Keep all fasteners tight to be sure the brushcutter is in safe working condition. Follow the maintenance instruc-
tions provided on page 6 of this manual.
18. Do not put hands or feet near or under the rotating parts.
19. Keep clear at all times.
20. If the brushcutter should start to vibrate abnormally, stop the engine and check immediately for the cause.
Vibration is generally a warning of trouble.
21. Do not trim too close to the ground in order to avoid hitting small stones or other debris. Avoid using the brush-
cutter near rocks, gravel, stones and similar matter.
22. Use the brushcutter only in daylight or good artificial light.
23. Shut off the engine and be certain the cutting blade has completely stopped rotating before inverting the
machine.
SPECIFICATIONS
MODEL
Dry Weight (kg)
Handle Configuration
Engine Displacement (cc)
Fuel Tank Capacity (R)
Carburetor
Ignition
Spark Plug
BC4320i
8.5
Horn Handle
1.0
Diaphragm Type
Solid State System
NGK BPM6Y Set Gap 0,6 - 0,7 mm
Fuel Mixture Use Only Non - Leaded Regular Gasoline.
2 - Cycle Oil Mix 25:1 Ratio Must Be Approved For Air - Cooled Engines.
41.5
β€” US-2 β€”
BC4320i
Product Description
11. Gearcase
12. Shaft Assembly
13. Model Name
14. Safety Decal
15. Fitting for Shoulder Harness
16. Throttle Trigger and Stop Switch
17. Handlebar
18. Clutch Drum Housing
19. Engine
10. Air Filter
11. Fuel Tank
12. Throttle Cable and Stop Switch Wires
13. Debris Shield
14. Cutting Blade
15. Shoulder Harness
16. Serial Number (on rear of engine)
1
2
4
7
6
13
11
10
5
89
14
16
15
12
3
16
ASSEMBLY INSTRUCTIONS
ENGINE AND DRIVESHAFT ASSEMBLY
Attach the clutch drum housing to the engine using the four screws.
HANDLEBAR
1. Loosen the two bolts on the top of the clamp bracket.
2. Insert the left and right handle bars into the clamp bracket.
Engine
Screw (4)
Clutch Drum Housing
Bolt (2)
Handle bar
Clamp Bracket


Product specificaties

Merk: Maruyama
Categorie: Grastrimmer
Model: BC4320i

Heb je hulp nodig?

Als je hulp nodig hebt met Maruyama BC4320i stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grastrimmer Maruyama

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Proviel

Proviel PVBS 32 Handleiding

19 November 2024
Proviel

Proviel PVBT 24 Handleiding

19 November 2024
Proviel

Proviel PVTA 18 Handleiding

19 November 2024
Proviel

Proviel PVT 53/2 Handleiding

19 November 2024
Proviel

Proviel PVT 527 Handleiding

19 November 2024
Proviel

Proviel PVT 325 Handleiding

19 November 2024
Anova

Anova D226 Handleiding

17 November 2024
Anova

Anova D546HXP Handleiding

17 November 2024
Sovereign

Sovereign SGT 26 Handleiding

16 November 2024