Maruyama B50R Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Maruyama B50R (24 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
T h e P O W E R i n O u t d o o r P o w e r
Completely read and understand this manual PRIOR to using this product.
Lea y entienda este manual a fondo, ANTES de usar este producto.
Leia até ao fim e conheça o manual antes de utilizar este produto.
BRUSHCUTTER
CORTADORA
MOTORROÇADOIRAS
B43/B43R
BF43R/BF50R
B50R
O W N E R ' S O P E R A T O R ' S M A N U A L
M a n u a l d e l P r o p i e t a r i o u O p e r a d o r
M a n u a l d e i n s t r u c ç õ e s
®
— US-1 —
SAFETY INSTRUCTIONS
01. Read and understand this Manual before using the brushcutter. Be thoroughly familiar with the proper use of the
brushcutter.
02. Never allow children to operate the brushcutter. it is not a toy. Never allow adults to operate the unit without first
reading the Instruction Manual.
03. Become familiar with the controls and know how to stop the engine quickly.
04. ALWAYS WEAR SAFETY GLASSES or other suitable eye protection, and hearing protection.
05. Keep the area of operation clear of all persons, particularly small children and pets.
06. Never operate a brushcutter when you are fatigued.
07. Never operate without proper shields or other protective safety devices in place.
08. Dress properly; do not wear loose clothing or jewelry. They can be caught in moving parts. Always wear sub-
stantial footwear, long pants and long sleeved shirt.
09. Gasoline is highly flammable; handle it carefully. Fill the fuel tank with the correct mixture of gasoline and oil
before trying to start the engine.
10. Use an approved fuel container to store the gasoline/oil mixture.
11. Do not fill the tank when the engine is hot or running.
12. Do not smoke while handling gasoline.
13. Fill the fuel tank outdoors and up to about 10mm from the top of the tank, not the top of the filler neck.
14. Wipe any spilled gasoline before starting the engine.
15. Always be sure of your footing; keep a firm hold of the handles with both hands, and walk, never run.
16. Use the right tool for the job. Do not use the brushcutter for any job that is not recommended by the manufactur-
er.
17. Keep all fasteners tight to be sure the brushcutter is in safe working condition. Follow the maintenance instruc-
tions provided on page US-6 of this manual.
18. Do not put hands or feet near or under the rotating parts.
19. Keep clear at all times.
20. If the brushcutter should start to vibrate abnormally, stop the engine and check immediately for the cause.
Vibration is generally a warning of trouble.
21. Do not trim too close to the ground in order to avoid hitting small stones or other debris. Avoid using the brush-
cutter near rocks, gravel, stones and similar matter.
22. Use the brushcutter only in daylight or good artificial light.
23. Shut off the engine and be certain the cutting blade has completely stopped rotating before inverting the
machine.
SPECIFICATIONS
MODEL
Dry Weight (kg)
Handle Configuration
Engine Displacement (cc)
Fuel Tank Capacity (R)
Carburetor
Ignition
Spark Plug
B43
8.4
Horn Handle
1.0
Diaphragm Type
Solid State System
NGK BPM6Y Set Gap 0,6 - 0,7 mm
Fuel Mixture Use Only Non - Leaded Regular Gasoline.
2 - Cycle Oil Mix 25:1 Ratio Must Be Approved For Air - Cooled Engines.
41.5
B43R
8.5
41.5
BF43R
8.6
41.5
B50R
8.5
49.9
BF50R
8.6
49.9
®
— US-2 —
B43, B43R, BF43R, B50R, BF50R
Product Description
11. Gearcase
12. Shaft Assembly
13. Safety Decal
14. Model Name
15. Attachment Ring for Shoulder Harness
16. Throttle Trigger and Stop Switch
17. Handlebar
18. Clutch Drum Housing
19. Engine
10. Air Filter
11. Fuel Tank
12. Throttle Cable and Stop Switch Wires
13. Debris Shield
14. Cutting Blade
15. Shoulder Harness
16. Serial Number (on rear of engine)
1
2
4
7
6
13
11
10
5
89
14
16
15
12
3
16
ASSEMBLY INSTRUCTIONS
ENGINE AND DRIVESHAFT ASSEMBLY
Attach the clutch drum housing to the engine using the four screws.
HANDLEBAR
1. Loosen the four screws on the top of the clamp bracket.
2. Insert the left and right handle bars into the clamp bracket.
Engine
Screw (4)
Clutch Drum Housing
Screws (4)
Bullhorn
Handle
Clamp Bracket
Stop Switch Wires/Throttle
Cable


Product specificaties

Merk: Maruyama
Categorie: Grastrimmer
Model: B50R

Heb je hulp nodig?

Als je hulp nodig hebt met Maruyama B50R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grastrimmer Maruyama

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer

Toro

Toro 51434 Handleiding

5 September 2024
Toro

Toro 51490 Handleiding

5 September 2024
Toro

Toro 51494 Handleiding

5 September 2024
Toro

Toro 51498T Handleiding

5 September 2024
Toro

Toro 51653 Handleiding

5 September 2024
Toro

Toro i51020 Handleiding

5 September 2024
Toro

Toro 51480A Handleiding

5 September 2024
Toro

Toro 51486 Handleiding

5 September 2024
Toro

Toro 51488T Handleiding

5 September 2024