Maruyama BC429H Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Maruyama BC429H (16 pagina's) in de categorie Grastrimmer. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
C o m p l e t e l y r e a d a n d u n d e r s t a n d t h i s m a n u a l b e f o r e u s i n g t h i s p r o d u c t .
L e a y e n t i e n d a e s t e m a n u a l a f o n d o , a n t e s d e u s a r e s t e p r o d u c t o
BC2259, BC2259H
BC329H, BC429H
BCF429H, BCF509H
BRUSHCUTTER
CORTADORA
OWNER'S OPERATOR'S MANUAL
Manual del Propietario u Operador
β€” US-1 β€”
SAFETY INSTRUCTIONS
01. Read and understand this Instruction Manual before using the brushcutter. Be thoroughly familiar with the proper
use of the brushcutter.
02. Never allow children to operate the brushcutter. it is not a toy. Never allow adults to operate the unit without first
reading the Instruction Manual.
03. Become familiar with the controls and know how to stop the engine quickly.
04. ALWAYS WEAR SAFETY GLASSES or other suitable eye protection, and hearing protection.
05. Keep the area of operation clear of all persons, particularly small children and pets.
06. Never operate a brushcutter when you are fatigued.
07. Never operate without proper guards or other protective safety devices in place.
08. Dress properly; do not wear loose clothing or jewelry. They can be caught in moving parts. Always wear substantial
footwear, long pants and long sleeved shirt.
09. Gasoline is highly flammable; handle it carefully. Fill the fuel tank with the correct mixture of gasoline and oil before
trying to start the engine.
10. Use an approved fuel container to store the gasoline/oil mixture.
11. Do not fill the tank when the engine is hot or running.
12. Do not smoke while handling gasoline.
13. Fill the fuel tank outdoors and up to about 10mm from the top of the tank, not the top of the filler neck.
14. Wipe any spilled gasoline before starting the engine.
15. Always be sure of your footing; keep a firm hold of the handles with both hands, and walk, never run.
16. Use the right tool for the job. Do not use the brushcutter for any job that is not recommended by the manufacturer.
17. Keep all fasteners tight to be sure the brushcutter is in safe working condition. Follow the maintenance instructions
provided on page US-6 of this manual.
18. Do not put hands or feet near or under the rotating parts.
19. Keep clear at all times.
20. If the brushcutter should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration
is generally a warning of trouble.
21. Do not trim too close to the ground in order to avoid hitting small stones or other debris. Avoid using the brushcutter
near rocks, gravel, stones and similar matter.
22. Use the brushcutter only in daylight or good artificial light.
23. Shut off the engine and be certain the cutting blade has completely stopped rotating before inverting the machine.
SPECIFICATIONS
MODELO BC2259 BC2259H BC329H BC429H BCF429H BCF509H
Dry Weight 4.6 Kg 4.7 Kg 5.9 Kg 7.6 Kg 7.9 Kg 7.9 Kg
Handle Configuration Loop Handle Horn Handle
Engine Displacement 22.5 cc 22.5 cc 31.8 cc 41.5 cc 41.5 cc 50.2 cc
Fuel Tank Capacity 0.6+0.6+1.0+1.0+1.0+1.0+
Carburetor Diaphragm Type
Ignition Solid State System
Spark Plug NGK BPM6Y Set Gap 0,6 - 0,7 mm
Fuel Mixture Use Only Non - Leaded Regular Gasoline.
2 - Cycle Oil Mix 25:1 Ratio Must Be Approved For Air - Cooled Engines.
β€” US-2 β€”
11. Gearcase
12. Drive Shaft Assembly
13. Model Name
14. Loop Handle
15. Attachment Ring for Shoulder
Strap
16. Throttle Trigger and Stop Switch
17. Shaft Grip
18. Clutch Drum Housing
19. Engine
10. Air Filter
11. Fuel Tank
12. Throttle Cable and Stop Switch
Wires
13. Debris Shield
14. Cutting Blade
15. Shoulder Strap
16. Safety Decal
BC2259
Product Description
1
2
3
4
5
6
13
12
11
10
7
8
9
14
11. Gearcase
12. Drive Shaft Assembly
13. Model Name
14. Handlebar
15. Attachment Ring for Shoulder
Harness
16. Throttle Trigger and Stop Switch
17. Handle Grip
18. Clutch Drum Housing
19. Engine
10. Air Filter
11. Fuel Tank
12. Throttle Cable and Stop Switch
Wires
13. Debris Shield
14. Cutting Blade
15. Shoulder Harness
16. Safety Decal
BC2259H
BC329H
BC429H
BCF429H
BCF509H
1
2
3
4
6
13
12
11
5
7
89
14
10
15
15
ASSEMBLY INSTRUCTIONS
ENGINE AND DRIVESHAFT ASSEMBLY
Attach the clutch drum housing to the engine using the four screws.
HANDLEBAR
(BC2259H, BC329H, BC429H, BCF429H, BCF509H)
1. Loosen the four screws on the top of the clamp bracket.
2. Insert the left and right horn handles into the clamp bracket.
Engine
Screw (4)
Clutch drum housing
Screws (4)
Horn Handle
Clamp Bracket
16
16


Product specificaties

Merk: Maruyama
Categorie: Grastrimmer
Model: BC429H

Heb je hulp nodig?

Als je hulp nodig hebt met Maruyama BC429H stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Grastrimmer Maruyama

Handleiding Grastrimmer

Nieuwste handleidingen voor Grastrimmer