Martin Logan Exos Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Martin Logan Exos (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
EX O S TM
u s e r ’ s m a n u a l
c l s e l e c t r o s t a t i c
M LA R T I N O G A N
2 Introduction
INTRODUCTION
Thank you for choosing MartinLogan. We are deeply com-
mitted to building only products of uncompromised quality
and technology and are dedicated to achieving perfection
in everything we do. By choosing MartinLogan you have
demonstrated your own dedication to the finer things in
life. You will not be disappointed with your choice.
The MartinLogan Exos crossover is a precision electronic
instrument that represents the culmination of an intensive,
dedicated group research program dedicated to establish-
ing a world class reference monitor. The Exos crossover is
an application-specific crossover filter network containing
both high and low pass active tone shaping that delivers
linear and extended frequency response.
We know you are eager to listen to your new crossover, so
we have provided the Exos Crossover User’s Manual.
Please read and follow these instructions as you initially
connect your crossover into your system. These instructions
are important and will prevent you from experiencing any
delay, frustration or system damage which might occur in
a trial and error procedure.
Phase Alignment
The phase alignment allows the phase to be adjusted for a
smoother blending in the crossover area. Ideally it is good
to get both the main speaker and the subwoofer in phase
at the crossover area. An easy way to set this is to try the
different setting until you get the worst sound. Then change
the phase setting by 180 degrees. For example if 270 degrees
sounds the worst use the 90 degree position.
Crossover Frequency
This control allows you to pick the crossover frequency
desired. The crossover frequency is the frequency at which
the signal is split between the subwoofer and the main
speaker. Too high of a crossover can result in boomy bass
while too low will leave a suck-out between the main
speaker's low frequency limit and the subwoofer..
Input
When lit, indicates that balanced inputs are in use by the
Exos crossover. This button should be pressed to light the
indicator LED if you are using balanced XLR connectors.
Otherwise, press the button to toggle the LED off if RCA
connectors are used.
Warning!
All outputs are always on. Do not have both the
RCA and balanced XLR connectors hooked-up
simultaneously and attempt to use this button as
an A/B switch. You will have degraded perfor-
mance and possibly damage your equipment.
Only one type of connector should be used
throughout your system.
Mute
When lit, indicates that the outputs of the EXOS are dis-
connected so that no signal reaches the power amplifiers.
Bass output
This knob controls the overall level of bass relative to the
rest of the music. Use it to adjust the amount of bass
according to your taste or for matching the output level of
your bass amplifier to that of your treble amplifier. Rotate
to the left for less bass, to the right for more. Use this to
fine tune the bass after properly setting the phase and
crossover controls.
Other Features
Push-Buttons
The EXOS uses precision push-buttons with LED indicators.
A lit LED indicates that the button’s function or option is on.
Battery Backup
An internal battery provides power to store your crossover
settings in case of AC power interruption.
Front Panel Controls 3
F PRONT ANEL ONTROLSC


Product specificaties

Merk: Martin Logan
Categorie: Niet gecategoriseerd
Model: Exos

Heb je hulp nodig?

Als je hulp nodig hebt met Martin Logan Exos stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Martin Logan

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd