Marshall PA400 Handleiding
Marshall
Gitaarversterker
PA400
Lees hieronder de 📖 handleiding in het Nederlandse voor Marshall PA400 (6 pagina's) in de categorie Gitaarversterker. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
PA400 FRONT PANEL
PA400 Front Panel
Functions.
Channels 1-6
1. Low impedance XLR input - For the
connection of low impedance
microphones.
2. High impedance Jack input - For the
connection of high impedance
microphones. Also suitable for acoustic
instruments with transducer type
pick-ups.
3-5. Bass, Middle and Treble EQ controls-
A wide range of tonal adjustment can be
selected using combinations of these
controls.
6. Monitor level - Provides the volume level
adjustment from the channel to the
monitor section.
7. Effects Level - Provides level adjustment
of the signal from the channel to effects
units linked through the master effects
loop.
8. Reverb Level - Allows the level of the
built in reverb to be adjusted on the
channel.
9. Volume control - This allows the
individual volume level of the channel to
be adjusted.
Channel 7 (tape channel).
10. Tape inputs - Phono (RCA) sockets to
accept the signal from tape or CD
players.
11. Tape outputs - Phono (RCA) sockets to
provide connection out to cassette or
other recording equipment.
12. Recording level control - Provides level
control of the output to external recording
equipment.
13- 14. Bass and Treble EQ controls - A
wide range of tonal adjustment can be
selected using combinations of these
controls.
15. Monitor control - Controls the level of
the tape signal to the monitor output.
16. Volume control - Provides level control
of the tape channel output.
Master Section.
17. 9 Band Graphic Equalizer - Provides
master EQ control across the audio
spectrum. This feature is particularly
useful for "shaping" the sound to achieve
peak performance in rooms of different
size and texture. Adjustment of -12 to
+12 dB is provided at 63Hz, 125Hz, 250
Hz, 500 Hz, 1 K Hz, 2 K Hz, 4 K Hz, 8 K
Hz and 16 K Hz. The slider tips are
loaded with an LED to provide the
display of graphic "shapes", even on
darkened stages.
18. Master Volume control - Controls the
overall volume level of the amplifier.
19. Master Reverb control - Provides the
overall level control of the reverb.
20. Effects Return control - Controls the
level of the signal returning to the
PA-400 from external effects processors
which would be linked through effects
loop sockets (26 & 27).
21. Effects Send control - Controls the level
of the signal from the PA-400 to the input
of external effects processors.
22.
Monitor output control - Controls the
level of the output from monitor socket
(25) to drive a separate monitor power amp.
23. Effects to Monitor control - Provides
level adjustment of the effects return into
the monitor mix.
24. Reverb to Monitor control - Provides
level adjustment of the reverb into the
monitor mix.
25. Monitor output - Jack socket for
connection to power amplifier driving the
monitor system.
26. Effects Send - Jack socket for connection
to the input of external effects processors.
27. Effects Return - Jack socket which
accepts the signal from the output of
external effects processors.
28.
Footswitch socket - For connection of a
two way (FS02) switch for reverb on/off
and effects loop in/out. If a single
footswitch is used, the reverb only will be
switched.
29. Pre-amp output - Provides a signal
directly out from the pre-amp (also mutes
the power amp) allows external
processing of signal which can then be
returned to Power Amp in socket (30).
30. Power Amp input - Provides a direct
input to the power amp stage of the
PA-400. Also acts as the effects return for
series connected processors linked via
socket (29).
31. Slave output - Sends out an overall
signal from the mixer section, suitable for
driving extra power amps, if the system
needs to be extended.
8
9
1
2
3
4
5
6
7
16
15 17
18
1920
21
22
2324
14
13
12
11
10
25 26 27 28 29 30 31
Product specificaties
| Merk: | Marshall |
| Categorie: | Gitaarversterker |
| Model: | PA400 |
Heb je hulp nodig?
Als je hulp nodig hebt met Marshall PA400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Gitaarversterker Marshall
19 Juni 2023
14 Juni 2023
5 Juni 2023
22 Mei 2023
11 Mei 2023
11 Mei 2023
8 Mei 2023
3 Mei 2023
3 Mei 2023
29 April 2023
Handleiding Gitaarversterker
- Gitaarversterker Yamaha
- Gitaarversterker Ampeg
- Gitaarversterker Behringer
- Gitaarversterker Boss
- Gitaarversterker Fender
- Gitaarversterker Hartke
- Gitaarversterker Line 6
- Gitaarversterker Peavey
- Gitaarversterker Roland
- Gitaarversterker Orange
- Gitaarversterker Vox
- Gitaarversterker Harley Benton
- Gitaarversterker ART
- Gitaarversterker Valeton
- Gitaarversterker TC Electronic
- Gitaarversterker Radial Engineering
- Gitaarversterker Mooer
- Gitaarversterker Blackstar
- Gitaarversterker Electro Harmonix
- Gitaarversterker Markbass
- Gitaarversterker SPL
- Gitaarversterker Hughes & Kettner
- Gitaarversterker Laney
- Gitaarversterker Ashdown Engineering
- Gitaarversterker Bugera
- Gitaarversterker Palmer
- Gitaarversterker Empress Effects
- Gitaarversterker Dimavery
- Gitaarversterker Fishman
- Gitaarversterker AER
- Gitaarversterker EBS
- Gitaarversterker Rivera
- Gitaarversterker Suhr
- Gitaarversterker Two Notes
- Gitaarversterker GR Bass
- Gitaarversterker Voodoo Lab
- Gitaarversterker AMT
- Gitaarversterker DACS Audio
- Gitaarversterker DV Mark
- Gitaarversterker Budda
- Gitaarversterker API Audio
Nieuwste handleidingen voor Gitaarversterker
20 November 2024
20 November 2024
18 November 2024
18 November 2024
16 November 2024
16 November 2024
16 November 2024
15 November 2024
20 Oktober 2024
20 Oktober 2024