Marshall DSL40CR Handleiding


Lees hieronder de šŸ“– handleiding in het Nederlandse voor Marshall DSL40CR (38 pagina's) in de categorie Gitaarversterkers. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/38
DSL100HR &
DSL40CR
OWNERā€™S MANUAL
INTRODUCTION
DSL 100/40 OVERVIEW
Congratulaī¦žons on your purchase of this Dual Super Lead (DSL) ampliīƒer from
Marshall Ampliīƒcaī¦žon.
The DSL provides the legendary Marshall tone, allowing you to express your disī¦žnct
playing style and aī¦®tude. From clean to distorted overdrives, the DSL is a versaī¦žle
all valve amp that allows you to easily dial in the sound you desire.
This DSL ampliīƒer not only delivers the tone you expect from a Super Lead ampliīƒer
it is also packed with an array of features such as an eī€ects loop, power reducī¦žon
and studio quality digital reverb. Right out of the box your DSL provides you with
the funcī¦žonality you need to take your sound from rehearsal to the stage with
conīƒdence.
Your DSL ampliīƒer has been designed speciīƒcally for those who need the full rich
tone of a valve amp. This makes the amp ideal for a live environment, studio or at
home thanks to the power reducī¦žon system.
We hope you enjoy performing, pracī¦žcing and recording with your DSL ampliīƒer.
- The Marshall Team.
The DSL 100 Head and 40 Combo feature the same funcī¦žons. The combo is loaded
with a 12ā€ G12 V-type speaker chosen for its ability to deliver excepī¦žonal tone and
ī™exibility.
The DSL features two foot switchable channels: CLASSIC GAIN and ULTRA GAIN.
The CLASSIC GAIN channel delivers sparkling clean sounds through to the more
aggressive break-up of a Marshall JCM800 ampliīƒer. The ULTRA GAIN channel
provides even more distorī¦žon and break-up for players looking for higher gain tones
from their ampliīƒer.
Both channels share a passive three-band EQ, with BASS, MIDDLE and TREBLE
controls. The EQ secī¦žon also features Tone Shiī›, which when acī¦žvated reconīƒgures
the pre-amp mid frequencies making DSL ideal for contemporary metal tones,
especially when combined with higher gain seī¦®ngs.
The DSL features professional quality digital REVERB and a series FX LOOP. The LOW
POWER funcī¦žon adds a further dimension to the DSL sound, giving you rich valve
tone at an ear-friendly volume.
For the most demanding players, the DSL 40 Combo and DSL 100 Head feature MIDI
compaī¦žbility meaning outboard MIDI equipment can access all the features needed
to perform.
ENGLISH
ENGLISH
PLEASE READ THIS MANUAL CAREFULLY
BEFORE PLUGGING IN.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.
KEEP THESE INSTRUCTIONS.
This device complies with part 15 of the FCC Rules. Operaī¦žon is subject to the
following two condiī¦žons:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operaī¦žon.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protecī¦žon against harmful interference in a residenī¦žal
installaī¦žon.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instrucī¦žons, may cause harmful
interference to radio communicaī¦žons.
However, there is no guarantee that interference will not occur in a parī¦žcular
installaī¦žon. If this equipment does cause harmful interference to radio or television
recepī¦žon, which can be determined by turning the equipment oī€ and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
ā€¢ Reorient or relocate the receiving antenna.
ā€¢ Increase the separaī¦žon between the equipment and the receiver.
ā€¢ Connect the equipment into an outlet on a circuit diī€erent from that to which
the receiver is connected.
ā€¢ Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modiīƒcaī¦žons not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
This device complies with CAN ICES-3(B)/NMB-3(B)
COMPLIANCE STATEMENT
WARNING! IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
WARNING:
Before going any further, make sure that
your ampliīƒer is compaī¦žble with your
mains electricity supply. If you have any
doubt, please seek help from a qualiīƒed
technician ā€“ your Marshall dealer can
help you in this respect.
MAINS INPUT & FUSE:
The speciīƒc mains input voltage
raī¦žng that your ampliīƒer has been
manufactured for is indicated on the
rear panel of the ampliīƒer. Your ampliīƒer
is provided with a detachable mains
(power) lead, which should be connected
to the MAINS INPUT socket on the rear
panel of the ampliīƒer (Rear Panel Funcī¢¼on
#26). The correct value and type of
mains fuse is speciīƒed on the rear panel
of the ampliīƒer.
NEVER aī‚‚empt to bypass the fuse or īƒt
one of the incorrect value or type.
TRANSPORTING YOUR EQUIPMENT:
Please ensure that your ampliīƒer is
switched oī€, unplugged from the mains
electricity supply and all removable
cables have been disconnected from
your equipment before aī‚‚empī¦žng to
move it.
IMPORTANT SET UP INFORMATION:
1. When using the DSL40CR, or the
DSL100HR with an extension
speaker cabinet(s), make sure
that the speaker cabinet(s) is
connected to the correct impedance
loudspeaker jack socket(s) on the
rear panel of the ampliīƒer. See
the LOUDSPEAKERS guide in this
manual for speciīƒc informaī¦žon
regarding impedance matching (Rear
Panel Funcī¢¼on #33).
WARNING:
Failure to do the above may damage
your ampliīƒer. When connecī¦žng a
speaker cabinet make sure that you use
a proper speaker cable. Never use a
screened (shielded) guitar cable for this
purpose.
2. Ensure that the POWER switch is
set to the OFF posiī¦žon (Front Panel
Funcī¢¼on #25).
3. Ensure the OUTPUT switch is in
the STANDBY posiī¦žon (Front Panel
Funcī¢¼on #24).
4. Connect the supplied mains (power)
lead into the MAINS INPUT (Rear
Panel Funcī¢¼on #26) īƒrst and then into
an electricity outlet.
5. Ensure that the volume controls on
the front panel are set to zero (Front
Panel Funcī¢¼ons #19 & #21).
6. Plug your guitar into the INPUT jack
socket (Front Panel Funcī¢¼on #1).
7. Switch the ampliīƒer ON using
the POWER switch, wait for a
few minutes and then switch the
OUTPUT switch to either the LOW
or HIGH posiī¦žon.
8. Turn the selected channel volume
up to your preferred level and your
ampliīƒer is ready to play.


Product specificaties

Merk: Marshall
Categorie: Gitaarversterkers
Model: DSL40CR

Heb je hulp nodig?

Als je hulp nodig hebt met Marshall DSL40CR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Gitaarversterkers Marshall

Andere handleidingen Marshall