Marshall DSL100HR Handleiding
Marshall
Gitaarversterkers
DSL100HR
Lees hieronder de š handleiding in het Nederlandse voor Marshall DSL100HR (38 pagina's) in de categorie Gitaarversterkers. Deze handleiding was nuttig voor 56 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/38
DSL100HR &
DSL40CR
OWNERāS MANUAL
INTRODUCTION
DSL 100/40 OVERVIEW
Congratulaī¦ons on your purchase of this Dual Super Lead (DSL) ampliīer from
Marshall Ampliīcaī¦on.
The DSL provides the legendary Marshall tone, allowing you to express your disī¦nct
playing style and aī¦®tude. From clean to distorted overdrives, the DSL is a versaī¦le
all valve amp that allows you to easily dial in the sound you desire.
This DSL ampliīer not only delivers the tone you expect from a Super Lead ampliīer
it is also packed with an array of features such as an eīects loop, power reducī¦on
and studio quality digital reverb. Right out of the box your DSL provides you with
the funcī¦onality you need to take your sound from rehearsal to the stage with
conīdence.
Your DSL ampliīer has been designed speciīcally for those who need the full rich
tone of a valve amp. This makes the amp ideal for a live environment, studio or at
home thanks to the power reducī¦on system.
We hope you enjoy performing, pracī¦cing and recording with your DSL ampliīer.
- The Marshall Team.
The DSL 100 Head and 40 Combo feature the same funcī¦ons. The combo is loaded
with a 12ā G12 V-type speaker chosen for its ability to deliver excepī¦onal tone and
īexibility.
The DSL features two foot switchable channels: CLASSIC GAIN and ULTRA GAIN.
The CLASSIC GAIN channel delivers sparkling clean sounds through to the more
aggressive break-up of a Marshall JCM800 ampliīer. The ULTRA GAIN channel
provides even more distorī¦on and break-up for players looking for higher gain tones
from their ampliīer.
Both channels share a passive three-band EQ, with BASS, MIDDLE and TREBLE
controls. The EQ secī¦on also features Tone Shiī, which when acī¦vated reconīgures
the pre-amp mid frequencies making DSL ideal for contemporary metal tones,
especially when combined with higher gain seī¦®ngs.
The DSL features professional quality digital REVERB and a series FX LOOP. The LOW
POWER funcī¦on adds a further dimension to the DSL sound, giving you rich valve
tone at an ear-friendly volume.
For the most demanding players, the DSL 40 Combo and DSL 100 Head feature MIDI
compaī¦bility meaning outboard MIDI equipment can access all the features needed
to perform.
ENGLISH
ENGLISH
PLEASE READ THIS MANUAL CAREFULLY
BEFORE PLUGGING IN.
FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.
KEEP THESE INSTRUCTIONS.
This device complies with part 15 of the FCC Rules. Operaī¦on is subject to the
following two condiī¦ons:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operaī¦on.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protecī¦on against harmful interference in a residenī¦al
installaī¦on.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instrucī¦ons, may cause harmful
interference to radio communicaī¦ons.
However, there is no guarantee that interference will not occur in a parī¦cular
installaī¦on. If this equipment does cause harmful interference to radio or television
recepī¦on, which can be determined by turning the equipment oī and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
ā¢ Reorient or relocate the receiving antenna.
ā¢ Increase the separaī¦on between the equipment and the receiver.
ā¢ Connect the equipment into an outlet on a circuit diīerent from that to which
the receiver is connected.
ā¢ Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modiīcaī¦ons not expressly approved by the party
responsible for compliance could void the users authority to operate the equipment.
This device complies with CAN ICES-3(B)/NMB-3(B)
COMPLIANCE STATEMENT
WARNING! IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
WARNING:
Before going any further, make sure that
your ampliīer is compaī¦ble with your
mains electricity supply. If you have any
doubt, please seek help from a qualiīed
technician ā your Marshall dealer can
help you in this respect.
MAINS INPUT & FUSE:
The speciīc mains input voltage
raī¦ng that your ampliīer has been
manufactured for is indicated on the
rear panel of the ampliīer. Your ampliīer
is provided with a detachable mains
(power) lead, which should be connected
to the MAINS INPUT socket on the rear
panel of the ampliīer (Rear Panel Funcī¢¼on
#26). The correct value and type of
mains fuse is speciīed on the rear panel
of the ampliīer.
NEVER aīempt to bypass the fuse or īt
one of the incorrect value or type.
TRANSPORTING YOUR EQUIPMENT:
Please ensure that your ampliīer is
switched oī, unplugged from the mains
electricity supply and all removable
cables have been disconnected from
your equipment before aīempī¦ng to
move it.
IMPORTANT SET UP INFORMATION:
1. When using the DSL40CR, or the
DSL100HR with an extension
speaker cabinet(s), make sure
that the speaker cabinet(s) is
connected to the correct impedance
loudspeaker jack socket(s) on the
rear panel of the ampliīer. See
the LOUDSPEAKERS guide in this
manual for speciīc informaī¦on
regarding impedance matching (Rear
Panel Funcī¢¼on #33).
WARNING:
Failure to do the above may damage
your ampliīer. When connecī¦ng a
speaker cabinet make sure that you use
a proper speaker cable. Never use a
screened (shielded) guitar cable for this
purpose.
2. Ensure that the POWER switch is
set to the OFF posiī¦on (Front Panel
Funcī¢¼on #25).
3. Ensure the OUTPUT switch is in
the STANDBY posiī¦on (Front Panel
Funcī¢¼on #24).
4. Connect the supplied mains (power)
lead into the MAINS INPUT (Rear
Panel Funcī¢¼on #26) īrst and then into
an electricity outlet.
5. Ensure that the volume controls on
the front panel are set to zero (Front
Panel Funcī¢¼ons #19 & #21).
6. Plug your guitar into the INPUT jack
socket (Front Panel Funcī¢¼on #1).
7. Switch the ampliīer ON using
the POWER switch, wait for a
few minutes and then switch the
OUTPUT switch to either the LOW
or HIGH posiī¦on.
8. Turn the selected channel volume
up to your preferred level and your
ampliīer is ready to play.
Product specificaties
| Merk: | Marshall |
| Categorie: | Gitaarversterkers |
| Model: | DSL100HR |
Heb je hulp nodig?
Als je hulp nodig hebt met Marshall DSL100HR stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Gitaarversterkers Marshall
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
Andere handleidingen Marshall
6 September 2024
19 Februari 2024
22 November 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023
16 September 2023