Marmitek DS90 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Marmitek DS90 (17 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 63 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
DS90
DOOR/WINDOW
SENSOR
20073 / 20070228 • DS90TM DOOR/WINDOW SENSOR
© ALL RIGHTS RESERVED MARMITEK®2006
DS90
DOOR/WINDOW
SENSOR
TM
USER MANUAL 3
GEBRAUCHSANLEITUNG 5
GUIDE UTILISATEUR 7
MODO DE EMPLEO 9
MANUALE D’ISTRUZIONI 11
GEBRUIKSAANWIJZING 13
2 MARMITEK
USER MANUAL DOOR/WINDOW SENSOR DS90 (Art. no. 09583)
SAFETY WARNINGS
• In case of improper usage or if you have altered and repaired the product yourself,
all guarantees expire. Marmitek does not accept responsibility in the case of improper usage
of the product or when the product is used for purposes other than specified. Marmitek
does not accept responsibility for additional damage other than covered by the legal
product responsibility.
• Batteries: keep batteries out of the reach of children. Dispose of batteries as chemical waste.
Never use old and new batteries or different types of batteries together. Remove the batteries
when you are not using the system for a longer period of time. Check the polarity (+/-) of
the batteries when inserting them in the product. Wrong positioning can cause an explosion.
DOOR/WINDOW SENSOR DS90
1. Transmitter part.
2. Magnet contact.
3. Control Indicator - Lights up when a signal
is transmitted.
4. Screw for opening the sensor.
5. Switch for entry delays.
6. Connection for extra wired contact.
7. Battery compartment.
8. Screw holes for mounting the sensor.
9. Tamper contact.
USING THE DOOR/WINDOW
SENSOR
1. Open the casing by removing screw (4).
2. Insert the batteries (2xAAA, alkaline) into the
battery compartment. Do not forget to check
the polarity.
3. Set the switch for entry delay (5) to MIN when you have
installed the sensor on a window and on MAX when the
sensor is installed on a door. When the switch is set to
MAX, you have time to open and close the door without
triggering the alarm. If you want an instant alarm (on e.g.
the backdoor), set the switch to MIN.
4. Keep the tamper contact (9) on the transmitter pressed
for 4 seconds. Release the button. The door/window
sensor has now chosen a unique code, which can be
registered with your console.
REGISTER THE DS90
DOOR/WINDOW SENSOR
You need to register the DS90 door/window sensor with
your TotalGuard/SafeGuard/Protector system. Your system’s
user guide will show you how to do this. If you do not have
a user guide at hand, you can download one from
www.marmitek.com (customer service -> manuals).
ENGLISH
3DS90TM
12
3
4
5
7
8
8
6
9


Product specificaties

Merk: Marmitek
Categorie: Bewakingscamera
Model: DS90

Heb je hulp nodig?

Als je hulp nodig hebt met Marmitek DS90 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Marmitek

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera