Marantz CR2020 Handleiding

Marantz Hifi systeem CR2020

Lees hieronder de 📖 handleiding in het Nederlandse voor Marantz CR2020 (22 pagina's) in de categorie Hifi systeem. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/22

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the user

to the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of suffi-

cient magnitude to constitute a risk of electric shock

to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,

INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV (Cable-TV) system installer’s attention to Article 820 – 40 of the NEC, that

provides guidelines for proper grounding and, in particular, specified that the cable ground shall be connected to the

grounding system of the building, as close to the point of cable entry as practical.

NOTE:

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment gener-

ates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with the instruc-

tions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interfer-

ence will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by tuning

the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the follow-

ing measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV techni-

cian for help.

NOTE:

Changes or modifications may cause this unit to fail to

comply with Part 15 of the FCC Rules and may void the

user’s authority to operate the equipment.

ENGLISHFRANÇAIS

This product was designed and manufactured to meet strict quality and

safety standards. There are, however, some installation and operation

precautions which you should be particularly aware of.

1. Read Instructions – All the safety and operating instructions should

be read before the appliance is operated.

2. Retain Instructions – The safety and operating instructions should

be retained for future reference.

3. Heed Warnings – All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions – All operating and use instructions should be

followed.

5. Cleaning – Unplug this video product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

6. Attachments – Do not use attachments not recommended by the

video product manufacturer as they may cause hazards.

7. Water and Moisture – Do not use this video product near

water – for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming pool, and the

like.

8. Accessories – Do not place this video product on an unstable cart,

stand, tripod, bracket, or table. The video product may fall, causing

serious injury to a child or adult, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the video product.

Any mounting of the appliance should follow the manufacturer’s

instructions, and should use a mounting accessory recommended

by the manufacturer.

9. Ventilation – Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the video product

and to protect it from overheating, and these openings must not be

blocked or covered. The openings should never be blocked by

placing the video product on a bed, sofa, rug, or other similar

surface. This video product should never be placed near or over a

radiator or heat register. This video product should not be placed

in a built-in installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions have

been adhered to.

10. Power Sources –This video product should be operated only from

the type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your

appliance dealer or local power company. For video products

intended to operate from battery power, or other sources, refer to

the operating instructions.

11. Grounding or Polarization – This video product is equipped with a

polarized alternating-current line plug (a plug having one blade

wider than the other). This plug will fit into the power outlet only

one way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug should

still fail to fit, contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the polarized plug.

AC POLARIZED PLUG

12. Power-Cord Protection – Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at plugs,

convenience receptacles, and the point where they exit from the

appliance.

13. Protective Attachment Plug – The appliance is equipped with an

attachment plug having overload protection. This is a safety

feature. See Instruction Manual for replacement or resetting of

protective device. If replacement of the plug is required, be sure

the service technician has used a replacement plug specified by

the manufacturer that has the same overload protection as the

original plug.

14. Outdoor Antenna Grounding – If an outside antenna or cable

system is connected to the video product, be sure the antenna or

cable system is grounded so as to provide some protection against

voltage surges and built up static charges. Section 810 of the

National Electrical Code, ANSI/NFPA No. 70-1984, provides

information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of antenna-

discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode. See Figure 1.

SAFETY

INSTRUCTIONS

READ BEFORE OPERATING EQUIPMENT

LASER SAFETY

This unit employs a laser, Only a qualified service person should remove

the cover or attempt to service this device, due to possible eye injury.

CAUTION – USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURE

OTHER THAN THOSE SPECIFIED HEREIN

MAY RESULT IN HAZARDOUS RADIA-

TION EXPOSURE.

ENGLISH FRANÇAIS

FIGURE 1

EXAMPLE OF ANTENNA GROUNDING ACCORDING TO

NATIONAL ELECTRICAL CODE INSTRUCTIONS

CONTAINED IN ARTICLE 810 - “RADIO AND TELEVISION EQUIPMENT”

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ELECTRIC

SERVICE

EQUIPMENT

NEC – NATIONAL ELECTRICAL CODE

15. Lightning – For added protection for this video product receiver

during a lightning storm, or when it is left un-attended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent damage

to the video product due to lightning and power-line surges.

16. Power Lines – An outside antenna system should not be located in

the vicinity of overhead power lines or other electric light or power

circuits, or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be

taken to keep from touching such power lines or circuits as contact

with them might be fatal.

17. Overloading – Do not overload wall outlets and extension cords as

this can result in a risk of fire or electric shock.

18. Object and Liquid Entry – Never push objects of any kind into this

video product through openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or electric

shock. Never spill liquid of any kind on th video product.

19. Servicing – Do not attempt to service this video product yourself as

opening or removing covers may expose you to dangerous voltage

or other hazards. Refer all servicing to qualified service personnel.

20. Damage Requiring Service – Unplug this video product from the

wall outlet and refer servicing to qualified service personnel under

the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the video

product.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and will often

require extensive work by a qualified technician to restore the

video product to its normal operation.

e. If the video product has been dropped or the cabinet has been

damaged.

f. When the video product exhibits a distinct change in

performance – this indicates a need for service.

21. Replacement Parts – When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric

shock or other hazards.

22. Safety Check – Upon completion of any service or repairs to this

video product, ask the service technician to perform safety checks

to determine that the video product is in proper operating

condition.

23. Carts and Stands – The appliance should be used only with a cart

or stand that is recommended by the manufacturer.

24. An appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

appliance and cart combination to overturn.

This Class B digital apparatus meets all requirements of the Canadian

Interference – Cansing Equipment Regulations.

Cet appareil numérique de la Classe B respecte toutes les exigences

du Règlement sur le matériel brouilleur du Canada.

Product specificaties

Merk:	Marantz
Categorie:	Hifi systeem
Model:	CR2020

Heb je hulp nodig?

Als je hulp nodig hebt met Marantz CR2020 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Hifi systeem Marantz

Marantz RX101 Handleiding

20 April 2023

Marantz Melody X M-CR612 Handleiding

27 Februari 2023

Marantz ST6003 Handleiding

22 Februari 2023

Marantz ST7001 Handleiding

2 Februari 2023

Marantz SD4050 Handleiding

23 Januari 2023

Marantz AV8805 Handleiding

22 Januari 2023

Marantz PM6006 Handleiding

10 Januari 2023

Marantz CR2020 Handleiding

7 Januari 2023

Marantz VS3002 Handleiding

7 Oktober 2022

Handleiding Hifi systeem

Nieuwste handleidingen voor Hifi systeem

Lenoxx CD813 Handleiding

16 November 2024

Denon CEOL N-8 Handleiding

16 November 2024

Fiio M7K Handleiding

16 November 2024

Fiio X1II Handleiding

16 November 2024

Fiio M3 Handleiding

16 November 2024

Fiio X3 Mark III Handleiding

16 November 2024

Pro-Ject BT Box E HD Handleiding

15 November 2024

Blaupunkt RCD 204 Handleiding

15 November 2024

Samsung MM-X7 Handleiding

15 November 2024

Auna VCP-191 Handleiding

14 November 2024