Makita UR008GD201 Handleiding

Makita Niet gecategoriseerd UR008GD201

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita UR008GD201 (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 178 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/20
INSTRUCTION MANUAL
Cordless Grass Trimmer
UR008G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: UR008G
Handle type Loop handle
No load speed
(at each rotation speed level)
3: 0 - 5,000 min-1
2: 0 - 4,600 min-1
1: 0 - 4,000 min-1
Overall length
(without cutting tool and battery)
1,803 mm
Nylon cord diameter 2.0 - 2.4 mm
Applicable cutting tool and
cutting diameter
Nylon cutting head
(P/N 197993-1)
430 mm
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
255 mm
305 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 5.0 - 5.7 kg
Protection degree IPX4
•
Due to our continuing program of research and development, the speciî‚¿cations herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or î‚¿re.
Recommended cord connected power source
Portable power pack PDC01 / PDC1200
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Noise
Applicable standard : ISO22868(ISO11806-1)/EN50636-2-91
Cutting tool
Sound pressure level (LpA) dB(A)
Sound power level (LWA) dB(A)
LpA dB(A)
Uncertainty (K)
dB(A)
LWA dB(A)
Uncertainty (K)
dB(A)
Nylon cutting head 79.0 1.6 91.9 1.6
•
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB (A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
3 ENGLISH
Vibration
Applicable standard : ISO22867(ISO11806-1)
Cutting tool Left hand Right hand
ah,W (m/s2) Uncertainty K
(m/s2)
ah,W (m/s2) Uncertainty K
(m/s2)
Nylon cutting head 2.5 1.5 2.5 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can dier from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
15m(50 )FT Keep distance at least 15 m.
Danger; be aware of thrown objects.
Never use metal blade.
Wear a helmet, goggles and ear protection.
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and
waste accumulators and batteries, as well as
their adaptation to national law, waste elec-
trical equipment, batteries and accumulators
should be stored separately and delivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the crossed-
out wheeled bin placed on the equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speciî‚¿cations provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, î‚¿re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodiî‚¿ed plugs and
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.

Product specificaties

Merk: Makita
Categorie: Niet gecategoriseerd
Model: UR008GD201

Heb je hulp nodig?

Als je hulp nodig hebt met Makita UR008GD201 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Makita

Makita

Makita UT002G Handleiding

16 December 2024
Makita

Makita CV101D Handleiding

16 December 2024
Makita

Makita UN001G Handleiding

5 September 2024
Makita

Makita TM001G Handleiding

5 September 2024
Makita

Makita DJS101 Handleiding

28 Mei 2024
Makita

Makita ADP05 Handleiding

7 Mei 2024
Makita

Makita DC4001 Handleiding

7 Mei 2024
Makita

Makita BCV03 Handleiding

7 Mei 2024
Makita

Makita DC18WA Handleiding

7 Mei 2024
Makita

Makita DML803 Handleiding

7 Mei 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx

Gourmetmaxx 03863 Handleiding

24 December 2024
Vello

Vello PGS-P Handleiding

24 December 2024
Venom

Venom Quad Charging Station VS4796 Handleiding

24 December 2024
Nec

Nec IPJ2000CM Handleiding

24 December 2024
Monogram

Monogram ZKPN Handleiding

24 December 2024
Philips

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024
Philips

Philips Senseo HD7002 Handleiding

24 December 2024
D-Link

D-Link DUB-C2 Handleiding

24 December 2024
Nec

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024
Nec

Nec DS1-TM01 Handleiding

24 December 2024