Makita TW004GD203 Handleiding

Makita Schroefmachine TW004GD203

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Makita TW004GD203 (16 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
INSTRUCTION MANUAL
Cordless Impact Wrench
TW004G
TW005G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: TW004G TW005G
Fastening capacities Standard bolt M10 - M20
High tensile bolt M10 - M16
Square drive 12.7 mm
No load speed (RPM) Max impact mode 0 - 3,200 min
-1
Hard impact mode 0 - 2,600 min
-1
Medium impact mode 0 - 1,800 min
-1
Soft impact mode 0 - 1,000 min
-1
Impacts per minute Max impact mode 0 - 4,000 min
-1
Hard impact mode 0 - 3,400 min
-1
Medium impact mode 0 - 2,600 min
-1
Soft impact mode 0 - 1,800 min
-1
Overall length 144 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 1.9 - 2.2 kg
โ€ข๎€ƒ Due๎€ƒto๎€ƒour๎€ƒcontinuing๎€ƒprogram๎€ƒof๎€ƒresearch๎€ƒand๎€ƒdevelopment,๎€ƒthe๎€ƒspeci๎‚ฟcations๎€ƒherein๎€ƒare๎€ƒsubject๎€ƒto๎€ƒchange๎€ƒ
without notice.
โ€ข๎€ƒ Speci๎‚ฟcations๎€ƒmay๎€ƒdi๏‚‡er๎€ƒfrom๎€ƒcountry๎€ƒto๎€ƒcountry.
โ€ข๎€ƒ The๎€ƒweight๎€ƒmay๎€ƒdi๏‚‡er๎€ƒdepending๎€ƒon๎€ƒthe๎€ƒattachment(s),๎€ƒincluding๎€ƒthe๎€ƒbattery๎€ƒcartridge.๎€ƒThe๎€ƒlightest๎€ƒand๎€ƒheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery๎€ƒcartridge BL4025 / BL4040
Charger DC40RA
โ€ข๎€ƒ Some๎€ƒof๎€ƒthe๎€ƒbattery๎€ƒcartridges๎€ƒand๎€ƒchargers๎€ƒlisted๎€ƒabove๎€ƒmay๎€ƒnot๎€ƒbe๎€ƒavailable๎€ƒdepending๎€ƒon๎€ƒyour๎€ƒregion๎€ƒof๎€ƒ
residence.
WARNING: Only use the battery cartridges and chargers listed above.๎€ƒUse๎€ƒof๎€ƒany๎€ƒother๎€ƒbattery๎€ƒcartridges๎€ƒ
and๎€ƒchargers๎€ƒmay๎€ƒcause๎€ƒinjury๎€ƒand/or๎€ƒ๎‚ฟre.
Symbols
The๎€ƒfollowings๎€ƒshow๎€ƒthe๎€ƒsymbols๎€ƒwhich๎€ƒmay๎€ƒbe๎€ƒused๎€ƒ
for๎€ƒthe๎€ƒequipment.๎€ƒBe๎€ƒsure๎€ƒthat๎€ƒyou๎€ƒunderstand๎€ƒtheir๎€ƒ
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only๎€ƒfor๎€ƒEU๎€ƒcountries
Do not dispose of electric equipment or
battery๎€ƒpack๎€ƒtogether๎€ƒwith๎€ƒhousehold๎€ƒwaste๎€ƒ
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries๎€ƒand๎€ƒbattery๎€ƒpack(s)๎€ƒthat๎€ƒhave๎€ƒ
reached the end of their life must be col-
lected๎€ƒseparately๎€ƒand๎€ƒreturned๎€ƒto๎€ƒan๎€ƒenvi-
ronmentally๎€ƒcompatible๎€ƒrecycling๎€ƒfacility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The๎€ƒtypical๎€ƒA-weighted๎€ƒnoise๎€ƒlevel๎€ƒdetermined๎€ƒaccord-
ing to EN62841-2-2:
Model TW004G
Sound pressure level (L
pA) : 99 dB(A)
Sound power level (L
WA) : 110 dB (A)
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ3๎€ƒdB(A)
Model TW005G
Sound pressure level (L
pA) : 99 dB(A)
Sound power level (L
WA) : 110 dB (A)
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ3๎€ƒdB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method๎€ƒand๎€ƒmay๎€ƒbe๎€ƒused๎€ƒfor๎€ƒcomparing๎€ƒone๎€ƒtool๎€ƒwith๎€ƒ
another.
NOTE: The declared noise emission value(s)
may๎€ƒalso๎€ƒbe๎€ƒused๎€ƒin๎€ƒa๎€ƒpreliminary๎€ƒassessment๎€ƒof๎€ƒ
exposure.
3 ENGLISH
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can di๏‚‡er from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o๏‚‡ and when
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-2:
Model TW004G
Work mode: impact tightening of fasteners of the maxi-
mum๎€ƒcapacity๎€ƒof๎€ƒthe๎€ƒtool
Vibration emission (a
h) : 16.5 m/s2
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ1.5๎€ƒm/s
2
Model TW005G
Work mode: impact tightening of fasteners of the maxi-
mum๎€ƒcapacity๎€ƒof๎€ƒthe๎€ƒtool
Vibration emission (a
h) : 16.5 m/s2
Uncertainty๎€ƒ(K)๎€ƒ:๎€ƒ1.5๎€ƒm/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and๎€ƒmay๎€ƒbe๎€ƒused๎€ƒfor๎€ƒcomparing๎€ƒone๎€ƒtool๎€ƒwith๎€ƒanother.
NOTE:๎€ƒThe๎€ƒdeclared๎€ƒvibration๎€ƒtotal๎€ƒvalue(s)๎€ƒmay๎€ƒalso๎€ƒ
be๎€ƒused๎€ƒin๎€ƒa๎€ƒpreliminary๎€ƒassessment๎€ƒof๎€ƒexposure.
WARNING:
The vibration emission during actual
use of the power tool can di๏‚‡er from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o๏‚‡ and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The๎€ƒEC๎€ƒdeclaration๎€ƒof๎€ƒconformity๎€ƒis๎€ƒincluded๎€ƒas๎€ƒAnnex๎€ƒA๎€ƒ
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and speci๎‚ฟcations provided
with this power tool. Failure to follow all instructions
listed๎€ƒbelow๎€ƒmay๎€ƒresult๎€ƒin๎€ƒelectric๎€ƒshock,๎€ƒ๎‚ฟre๎€ƒand/or๎€ƒ
serious๎€ƒinjury.
Save all warnings and instruc-
tions for future reference.
The๎€ƒterm๎€ƒ"power๎€ƒtool"๎€ƒin๎€ƒthe๎€ƒwarnings๎€ƒrefers๎€ƒto๎€ƒyour๎€ƒ
mains-operated๎€ƒ(corded)๎€ƒpower๎€ƒtool๎€ƒor๎€ƒbattery-operated๎€ƒ
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ๎ƒ€ammable
liquids, gases or dust. Power tools create sparks
which๎€ƒmay๎€ƒignite๎€ƒthe๎€ƒdust๎€ƒor๎€ƒfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you๎€ƒto๎€ƒlose๎€ƒcontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodi๎‚ฟed๎€ƒplugs๎€ƒand๎€ƒmatching๎€ƒoutlets๎€ƒwill๎€ƒ
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric๎€ƒshock๎€ƒif๎€ƒyour๎€ƒbody๎€ƒis๎€ƒearthed๎€ƒor๎€ƒgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic ๎‚ฟelds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the in๎ƒ€uence of drugs, alcohol or med-
ication. A moment of inattention while operating
power๎€ƒtools๎€ƒmay๎€ƒresult๎€ƒin๎€ƒserious๎€ƒpersonal๎€ƒinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as๎€ƒa๎€ƒdust๎€ƒmask,๎€ƒnon-skid๎€ƒsafety๎€ƒshoes,๎€ƒhard๎€ƒhat๎€ƒor๎€ƒ
hearing protection used for appropriate conditions
will๎€ƒreduce๎€ƒpersonal๎€ƒinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the o๏‚‡-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.๎€ƒCarrying๎€ƒpower๎€ƒtools๎€ƒwith๎€ƒ
your๎€ƒ๎‚ฟnger๎€ƒon๎€ƒthe๎€ƒswitch๎€ƒor๎€ƒenergising๎€ƒpower๎€ƒtools๎€ƒ
that have the switch on invites accidents.


Product specificaties

Merk: Makita
Categorie: Schroefmachine
Model: TW004GD203

Heb je hulp nodig?

Als je hulp nodig hebt met Makita TW004GD203 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Schroefmachine Makita

Handleiding Schroefmachine

Nieuwste handleidingen voor Schroefmachine