Mac Tools MPF980381 Handleiding

Mac Tools Schroefmachine MPF980381

Lees hieronder de 📖 handleiding in het Nederlandse voor Mac Tools MPF980381 (65 pagina's) in de categorie Schroefmachine. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/65
3/8" Air Impact Wrench 1/2" Air Impact Wrench High Performance 3/8" Air Impact Wrench| |
High Performance 1/2" Air Impact Wrench High Performance 1/2" Compact Air Impact Wrench|
High Performance 1/2" Air Impact Wrench 2" Extended Anvil
MPF980381, MPF980501,
MPF990381, MPF990501C,
MPF990501, MPF992501
Instruction Manual
To reduce the risk of injury, read and un
these safety warnings and instructions b
using the tool. Keep these instructions w
the tool for future reference. If you have
any questions, contact your MAC TOOLS
representative or distributor.
WARNING
WARNING
© 2018 Mac Tools
derstand
e
f
ore
w
ith
S
© 2018 Mac Tools
MACTOOLS.COM
2
TABLE OF CONTENTS
Introduction 2
Safety Instructions 2 - 8
Maintenance 9 - 10
Specifi cations 11
Tool Components 12 - 19
Contact Information 21
INTRODUCTION
The
Mac Tools MPF980381, MPF980501, MPF990381, MPF990501C, MPF990501
and MPF992501
Impact
Wrenches
are precision-built tools, designed for driving, tightening and loosening threaded fasteners, usually
nuts and bolts, when fi tted with a suitable impact socket. These tools will deliver effi cient, dependable service
when used correctly and with care. As with any fi ne power tool, for best performance the manufacturer’s
instructions must be followed. Please study this manual before operating the tool and understand the safety
warnings and instructions. The instructions on installation, operation and maintenance should be read carefully,
and the manual kept for reference. NOTE: Additional safety measures may be required because of your parti-
cular application of the tool. Contact your
Mac Tools
representative or distributor with any questions concerning
the tool and its use.
MACTOOLS.COM
Mac Tools
•
505 North Cleveland Avenue
•
Westerville, Ohio 43082 800.MACTOOLS
Mac Tools-Europe, Stanley Black & Decker Inc.
•
Unit 3, Europa Court
Sheffi eld Business Park
•
Sheffi eld, S9 1XE
0114 2917266
Defi nitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal
injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: may Indicates a practice not related to personal injury which, if not avoided, result in property damage.
The label on your tool may include the following symbols. The symbols and their definitions are asfollows:
V ................... volts
Hz ................. hertz
min ............... minutes
or DC ..... direct current
.................. Class I Construction (grounded)
…/min ........... per minute
BPM .............. beats per minute
IPM ............... impacts per minute
RPM .............. revolutions per minute
sfpm .............. surface feet per minute
SPM .............. strokes per minute
A ...................amperes
W ..................watts
or AC ........ alternating current
or AC/DC .. alternating or direct current
.................. Class II Construction (double
insulated)
no ................. no load speed
n ................... rated speed
.................. earthing terminal
.................. safety alert symbol
................. visible radiation
................. respiratory protection
................. eye protection
................. hearing protection
IPxx ............... ingress protection
.................. do not incinerate
800.MACTOOLS 3
WARNING
IMPORTANT SAFETY INFORMATION ENCLOSED.
READ THIS MANUAL BEFORE OPERATING THE TOOL.
SAVE FOR FUTURE REFERENCE
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
Do not use damaged, frayed or
deteriorated air hoses and fi ttings.
Air powered tools can vibrate in
use. Vibration, repetitive motions or
uncomfortable positions may be harmful
to your hands and arms. Stop using any
tool if discomfort, tingling feeling or
pain occurs. Seek medical advice before
resuming use.
Do not carry the tool by the hose.
Keep body stance balanced and fi rm. Do
not overreach when operating this tool.
Always turn off the air supply and
disconnect the air supply hose before
installing, removing or adjusting
any accessory on this tool, or before
performing any maintenance on this tool.
Use protective equipment such as
glasses, gloves, safety shoes, as well
as acoustic protection.
Remain vigilant, use common sense
and pay attention when using the
tool.
Always wear ANSI Z87.1 CAN CSA
Z94.3 eye protection or for Europe,
suitable CE marked eye protection
when operating or performing
maintenance on this tool.
Always wear suitable respiratory
protection when operating this tool.
Operate at 90 psig (6.2 bar / 620
kPa) Maximum air pressure.
Do not over-oil and do not use
heavy grade oil as stalling and low
performance may result.
GENERAL SAFETY INSTRUCTIONS
WARNING: Read all safety warnings and all instructions. Failure to follow the warning and instructions
may result in electric shock, fi re and or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Wear personal protective equipment. Depending on application, use face shield, safety goggles
or safety glasses. As appropriate, wear dust mask, hearing protectors, gloves and workshop apron
capable of stopping small abrasive or workpiece fragments.
The eye protection must be capable of stopping fl ying debris generated by various operations. The dust mask
or respirator must be capable of fi ltrating particles generated by your operation. Prolonged exposure to high
intensity noise may cause hearing loss. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask
if cutting operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3)
• ANSI S12.6 (S3.19) hearing protection
• NIOSH/OSHA/MSHA respiratory protection

Product specificaties

Merk: Mac Tools
Categorie: Schroefmachine
Model: MPF980381

Heb je hulp nodig?

Als je hulp nodig hebt met Mac Tools MPF980381 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Schroefmachine Mac Tools

Mac Tools

Mac Tools MPF980381 Handleiding

23 Februari 2025

Handleiding Schroefmachine

Nieuwste handleidingen voor Schroefmachine

Fuxtec

Fuxtec FX-E1IW20 Handleiding

12 Januari 2025
Hazet

Hazet 9012EL-SPC Handleiding

11 Januari 2025
Gude

Gude MS 4.0-150-17 4in1 Akku-Schrauber inkl. Koffer + Akku 1.5Ah + Zub Handleiding

16 December 2024
Total

Total TCKLI2006 Handleiding

16 December 2024
Total

Total TAT40122 Handleiding

16 December 2024
Total

Total TAT40342 Handleiding

16 December 2024
Hilti

Hilti SID 2‑A12 Handleiding

9 December 2024
Black Decker

Black Decker 2038 Handleiding

8 December 2024
Silverline

Silverline 248250 Handleiding

5 December 2024
Bavaria

Bavaria BSD 3,6/1 Li Handleiding

5 December 2024