Makita SA7000C Handleiding

Makita Schuurmachine SA7000C

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita SA7000C (12 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

I N S T R U C T I O N M A N U A L

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

ENGLISH

Angle Sander

MODEL SA7000C

005015

DOUBLE

INSULATION

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

Symbols END202-2

The following show the symbols used for the tool. Be

sure that you understand their meaning before use.

...................Read instruction manual.

...................DOUBLE INSULATION

.....................Wear safety glasses.

..................Only for EU countries

Do not dispose of electric equipment

together with household waste mate-

rial!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its imple-

mentation in accordance with

national law, electric equipment that

have reached the end of their life

must be collected separately and

returned to an environmentally com-

patible recycling facility.

Intended use

The tool is intended for the sanding of large surface of

wood, plastic and metal materials as well as painted sur-

faces.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For European countries only

Noise and Vibration

The typical A-weighted noise levels are

sound pressure level: 89 dB (A)

sound power level: 102 dB (A)

– Wear ear protection. –

The typical weighted root mean square acceleration

value is not more than 2.5 m/s2.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product

is in compliance with the following standards of stand-

ardized documents, HD400, EN50144, EN55014,

EN61000 in accordance with Council Directives, 73/23/

EEC, 89/336/EEC, 98/37/EC.

Yasuhiko Kanzaki CE 2003

Director

MAKITA INTERNATIONAL EUROPE LTD.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15

8JD, ENGLAND

Model SA7000C

Disc diameter 180 mm

Spindle thread M14

No load speed (min-1)0 - 4,000

Overall length 453 mm

Net weight 3.2 kg

Safety class /II

GENERAL SAFETY RULES ENA100-1

WARNING:

Read all instructions. Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury. The term “power tool” in all of the

warnings listed below refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

Work area

1. Keep work area clean and well lit. Cluttered and

dark areas invite accidents.

2. Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while oper-

ating a power tool. Distractions can cause you to

lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet condi-

tions. Water entering a power tool will increase the

risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

Personal safety

9. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools

may result in serious personal injury.

10. Use safety equipment. Always wear eye protec-

tion. Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal inju-

ries.

11. Avoid accidental starting. Ensure the switch is

in the off position before plugging in. Carrying

power tools with your finger on the switch or plug-

ging in power tools that have the switch on invites

accidents.

12. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

13. Do not overreach. Keep proper footing and bal-

ance at all times. This enables better control of the

power tool in unexpected situations.

14. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

15. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

these devices can reduce dust related hazards.

Power tool use and care

16. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the rate

for which it was designed.

17. Do not use the power tool if the switch does not

turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be

repaired.

18. Disconnect the plug from the power source and/

or the battery pack from the power tool before

making any adjustments, changing accessories,

or storing power tools. Such preventive safety

measures reduce the risk of starting the power tool

accidentally.

19. Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to operate

the power tool. Power tools are dangerous in the

hands of untrained users.

20. Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

Product specificaties

Merk:	Makita
Categorie:	Schuurmachine
Model:	SA7000C
Kleur van het product:	Black,Cyan,Silver
Gewicht:	3400 g
Breedte:	170 mm
Hoogte:	136 mm
Stroombron:	AC
Input vermogen:	1600 W
Stationair toerental (max):	4000 RPM
Lengte:	453 mm
Grinding disc diameter:	180 mm