Makita HR3001CJ Handleiding

Makita Niet gecategoriseerd HR3001CJ

Lees hieronder de 📖 handleiding in het Nederlandse voor Makita HR3001CJ (20 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 206 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/20
INSTRUCTION MANUAL
Combination Hammer
HR3011FC
HR3012FC
HR3001C
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: HR3011FC HR3012FC HR3001C
Capacities Concrete 30 mm
Core bit 80 mm
Diamond core bit (dry type) 80 mm
Steel 13 mm
Wood 32 mm
No load speed 0 - 840 min-1
Blows per minute 0 - 4,500 min-1
Overall length 369 mm 386 mm 369 mm
Net weight 4.4 - 4.8 kg 4.5 - 4.7 kg 4.1 - 4.5 kg
Safety class /II
Optional accessory
Model: DX10 (For HR3011FC) DX11 (For HR3012FC)
Applicable workpiece and workmode for concrete drilling only
(not for metal or wood, and not for core drilling or chiseling)
Suction performance 0.35 l/min
Operating stroke Up to 190 mm
Suitable drill bit Up to 265 mm
Net weight 1.2 kg
•
Due to our continuing program of research and development, the speciî‚¿cations herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-6:
Model HR3011FC
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR3012FC
Sound pressure level (L
pA) : 93 dB(A)
Sound power level (L
WA) : 104 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR3001C
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR3011FC with DX10
Sound pressure level (L
pA) : 96 dB(A)
Sound power level (L
WA) : 107 dB (A)
Uncertainty (K) : 3 dB(A)
Model HR3012FC with DX11
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty (K) : 3 dB(A)
3 ENGLISH
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The following table shows the vibration total value
(tri-axial vector sum) determined according to applica-
ble standard.
Model HR3011FC
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD )
9.5 m/s21.5 m/s2EN60745-2-6
Hammer
drilling into
concrete with
DX10 (ah, HD)
9.5 m/s21.5 m/s2EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq )
6.0 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
5.5 m/s21.5 m/s2EN62841-2-1
Model HR3012FC
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD )
9.5 m/s21.5 m/s2EN60745-2-6
Hammer
drilling into
concrete with
DX11 (ah, HD)
8.0 m/s21.5 m/s2EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq )
5.5 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
6.0 m/s21.5 m/s2EN62841-2-1
Model HR3001C
Work mode Vibration
emission
Uncertainty (K)
Applicable
standard
Hammer
drilling into
concrete
(ah, HD)
13.5 m/s21.5 m/s2EN60745-2-6
Chiselling func-
tion with side
grip (a
h, Cheq )
11.0 m/s21.5 m/s2EN60745-2-6
Drilling into
metal (ah, D)
6.0 m/s21.5 m/s2EN62841-2-1
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and speciî‚¿cations provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, î‚¿re and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

Product specificaties

Merk: Makita
Categorie: Niet gecategoriseerd
Model: HR3001CJ

Heb je hulp nodig?

Als je hulp nodig hebt met Makita HR3001CJ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Makita

Makita

Makita UN001G Handleiding

5 September 2024
Makita

Makita TM001G Handleiding

5 September 2024
Makita

Makita DJS101 Handleiding

28 Mei 2024
Makita

Makita ADP05 Handleiding

7 Mei 2024
Makita

Makita DC4001 Handleiding

7 Mei 2024
Makita

Makita BCV03 Handleiding

7 Mei 2024
Makita

Makita DC18WA Handleiding

7 Mei 2024
Makita

Makita DML803 Handleiding

7 Mei 2024
Makita

Makita DCJ205 Handleiding

7 Mei 2024
Makita

Makita RM350D Handleiding

8 April 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Electrolux

Electrolux STA9 Handleiding

23 November 2024
Electrolux

Electrolux UMP3 Handleiding

23 November 2024
Electrolux

Electrolux ZS70GL Handleiding

23 November 2024
Bosch

Bosch HEZ8TK36UC Handleiding

23 November 2024
Bosch

Bosch HEZ8ZZ36UC Handleiding

23 November 2024
Bosch

Bosch HDZIT301 Handleiding

23 November 2024
Bosch

Bosch HEZBS301 Handleiding

23 November 2024
LG

LG LX-330 Handleiding

23 November 2024
Stamos

Stamos S-PLASMA 60U Handleiding

23 November 2024
Bosch

Bosch KSZ2AVU00 Handleiding

22 November 2024